SOURCE: Tara Gold Resources Corp.

January 30, 2007 07:00 ET

683 g/t Silver Across 8.25 Meters and 296 g/t Silver Across 10.7 Meters Drilled at San Miguel Project, Mexico

CHICAGO, IL -- (MARKET WIRE) -- January 30, 2007 -- Tara Gold Resources Corp. (PINKSHEETS: TRGD) (FRANKFURT: T8N) is pleased to release the most recently reported assays from its ongoing drill program at the San Miguel Project near Temoris, Chihuahua, Mexico. The following results are four drill holes completed in the San Antonio area and are in fill holes between drill holes SA-01 to SA-09 reported on Dec 14th, 2006. These four drill holes span a distance along strike of about 325 meters.

In August, 2005, Tara Gold Resources signed an agreement with Paramount Gold Mining Corp. giving Paramount the right to earn up to a 70% interest in the project by spending US$2.5 million, delivering 700,000 shares, and making various payments to Tara Gold.

Drill hole SA-10 intersected 8.25 meters (107.30 to 115.55) of 683 g/t silver, 16.70 meters (11.3 to 28.0) of 129.0 g/t silver and 8.4 meters (44.6 to 53.0) of 137 g/t silver with 1.19% combined lead and zinc. This hole hit 51.6 meters that averaged 78 g/t silver with 0.57% combined lead and zinc from 11.3 to 62.9 meters. SA-11 intersected 5.4 meters (35.4 to 40.8) of 217 g/t silver and had a number of shorter intersects down hole such as 0.90 meters (131.5 to 132.4) of 427 g/t silver. SA-12 intersected 34.5 meters (40.8 to 75.3) of 134 g/t silver and had another intersect above that of 0.70 meters (31.5 to 32.2) of 684 g/t silver. SA-13 intersected 10.7 meters (53.0 to 63.7) of 296 g/t silver.

Paramount's Manager of Exploration in Mexico, Bill Reed, said, "These drill results continue to confirm continuity and grades over substantial widths as drill holes SA-11 and SA-13 fill in about 130 meters of the 300 meter gap between step out holes SA-01 and SA-10. The mineralized system appears to be getting stronger as we step out along strike to the north and our drilling to date has been quite shallow with most drill holes between 100 and 150 meters deep. I believe we have tremendous potential to expand this discovery, not only by continuing to drill along strike but by drill testing to depth as well. The Alaska Juneau company was still mining high grade silver and gold at depths of 200 meters at the San Luis mine located on this mineralized trend and old mine records indicated higher grade ore below that depth."

San Antonio Zone Highlights

SA-10 cut 8.25 meters from 107.30 to 115.55 of 683 g/t silver
and 16.70 meters from 11.3 to 28.0 meters of 129.0 g/t silver
and 8.4 meters from 44.6 to 53.0 meters of 137 g/t silver with 1.19%
combined lead and zinc.

SA-11 cut 5.4 meters from 35.4 to 40.8 of 217 g/t silver
and 3.5 meters from 55.5 to 59.0 of 122 g/t silver
and 0.90 meters from 131.5 to 132.4 of 427 g/t silver.

SA-12 cut 34.5 meters from 40.8 to 75.3 averaging 134 g/t silver
and 0.60 meters from 24.2 to 24.8 of 138 g/t silver
and 0.70 meters from 31.5 to 32.2 of 684 g/t silver

SA-13 cut 10.7 meters (53.0 to 63.7) of 296 g/t silver
Drill Hole Locations

SA-10 steps out approximately 60 meters to the south of SA-09 that reported three silver intersects, including 5.7 meters of 152 g/t silver and 6.1 meters of 149 g/t silver (see Dec. 14, 2006 news release).

SA-12 is a step out of approximately 40 meters to the south of SA-01 that reported four silver intersects and averaged 44.85 meters of 133.4 g/t silver (see Dec. 14, 2006 news release).

SA-13 steps out approximately 40 meters to the north of SA-01.

SA-11 is about 85 meters north of SA-13 and under trench ZSA-09 that reported 61.9 meters averaging 79.0 g/t Ag, including 2.1 meters of 625 g/t Ag, and 1.0 meters of 887 g/t Ag with 5.59% lead (see Jan. 3, 2007 news release).

Quality Control Person

Paramount takes detailed photos of the entire core before it is cut to half core which is assayed at ALS Chemex's Vancouver laboratory. As part of quality assurance, quality control (QAQC), a blank (sterile) sample is submitted every 20th sample. Later, pulps from a number of intervals will be renumbered and pulps from known standards will be inserted between them in numerical order. These will then be submitted for reanalysis. The results will then be compared to the original values reported, and the known values of the inserted standards. Half-core samples have been retained on site for verification and reference purposes.

C.W. (Bill) Reed, B. Sc. Mineralogy, is acting as qualified person, on behalf of Paramount, and has prepared the detail and review with respect to this news release.

Drill   From    To      Width   Gold    Silver  Gold    Lead    Zinc
 hole   Meters  Meters  Meters  g/t     g/t     Equiv   %       %
SA - 10 11.30   28.00   16.70   0.00    129.00  2.15    0.20    0.27
        28.00   44.60   16.60   0.00    27.00   0.46    0.17    0.26
        44.60   53.00   8.40    0.00    137.00  2.28    0.54    0.65
        53.00   60.50   7.50    0.00    17.00   0.28    0.12    0.23
        60.50   62.90   2.40    0.00    62.00   1.04    0.22    0.42

Average 11.30   62.90   51.60   0.00    78.00   1.30    0.24    0.33

        92.00   107.30  15.30   0.00    26.00   0.43    0.11    0.28
        107.30  115.55  8.25    0.00    683.00  11.38   0.78    0.97
        115.55  120.00  4.45    0.00    64.00   1.06    0.22    0.46

SA - 11 0.00    11.00   11.00   0.00    62.00   1.04    0.08    0.21
        11.00   24.00   13.00   0.00    26.00   0.43    0.06    0.18
        24.00   34.00   10.00   0.00    63.00   1.04    0.03    0.13
        35.40   40.80   5.40    0.00    217.00  3.61    0.02    0.14

Average 0.00    40.80   40.80   0.00    69.00   1.15    0.05    0.17

        55.50   59.00   3.50    0.00    122.00  2.04    0.09    0.22
        116.45  117.50  1.05    0.00    102.00  1.70    0.70    2.01
        131.50  132.40  0.90    0.00    427.00  7.12    0.18    0.58
        154.20  157.10  2.90    0.00    59.00   0.99    0.26    0.31

SA - 12 24.20   24.80   0.60    0.00    138.00  2.30    1.26    1.51
        31.50   32.20   0.70    0.00    684.00  11.40   0.75    0.33
        40.80   42.30   1.50    0.00    293.00  4.88    0.12    0.10
        45.30   55.90   10.60   0.00    63.00   1.04    0.16    0.15
        55.90   72.05   16.15   0.00    201.00  3.35    0.13    0.15
        72.05   75.30   3.25    0.00    57.00   0.95    0.04    0.16

Average 40.80   75.30   34.50   0.00    134.00  2.23    0.13    0.15


SA - 13 18.50   19.00   0.50    0.00    338.00  5.63    0.11    0.12
        27.70   30.20   2.50    0.00    56.00   0.93    0.05    0.17
        53.00   63.70   10.70   0.00    296.00  4.93    0.05    0.10
        63.70   69.10   5.40    0.00    29.00   0.49    0.06    0.16
About San Miguel

San Miguel is currently comprised of 16 concessions covering an estimated 8 km strike of silver and gold mineralization. It is located in Chihuahua, Mexico and lies in the Guazapares mining district, part of the gold-silver belt of the Sierra Madre Occidental.

About Tara Gold Resources Corp.

Tara Gold Resources Corp. is a growth-oriented precious metals exploration and development company with existing production plants. It is management's objective to become a significant gold and precious metals producer by re-initiating and increasing production levels at La Currita, Lluvia de Oro and Picacho, and developing the San Miguel, La Millionaria, Pilar De Mocoribo and Las Minitas projects in Mexico. We continue to acquire other advanced-stage projects and/or producing mines in one of the most prolific precious metal districts in the world. For more information, please visit the Company's web site at: http://www.TaraGoldResources.com.

Safe Harbor Statement under the Private Securities Litigation Reform Act of 1995: The statements contained herein which are not historical are forward-looking statements that are subject to risks and uncertainties that could cause actual results to differ materially from those expressed in the forward-looking statements, including, but not limited to, certain delays beyond the company's control with respect to market acceptance of new technologies or products, delays in testing and evaluation of products, and other risks detailed from time to time in the Company's filings with the Securities and Exchange Commission.

Contact Information