Kirkland Lake Gold Inc.
LSE : KGI

Kirkland Lake Gold Inc.

November 24, 2009 02:00 ET

Kirkland Lake Gold Inc. and Queenston Mining Inc.: New High Grade Mineralization on South Claims JV

FOR:  KIRKLAND LAKE GOLD INC.

TSX, AIM SYMBOL:  KGI

AND  QUEENSTON MINING INC.

TSX, FRANKFURT SYMBOL:  QMI

November 24, 2009

Kirkland Lake Gold Inc. and Queenston Mining Inc.: New High Grade Mineralization on South Claims JV

Drill Hole 53-1364 Returns 5.12 Ounces of Gold per Ton Over 6.3 feet

TORONTO, ONTARIO--(Marketwire - Nov. 24, 2009) - Kirkland Lake Gold Inc. ("KL Gold") (TSX:KGI)(AIM:KGI) and Queenston
Mining Inc. ("Queenston") (TSX:QMI)(FRANKFURT:QMI)(STUTTGART:QMI) are pleased to announce the results from the recently
completed drilling on the jointly held (50%-50%) South Claims Joint Venture property within the South Mine Complex
("SMC") and the HM Joint Venture property, both located south of KL Gold's Macassa Mine in Kirkland Lake, Ontario.

Five new diamond drill holes, from one of the various exploration programs conducted on the SMC, were completed from the
KL Gold 5300 level drift along the South Claims boundary. Three of the four holes testing the New South Zone returned
high grade intersections. A fifth hole was drilled to verify the location of a strong fault south of the 5300 level
drift. Intersections from the underground drilling program include 5.12 ounces of gold per ton ("opt") uncut (3.95 opt
cut) over a true width of 6.3 feet, 5.11 opt uncut (3.92 opt cut) over a true width of 6.1 feet and 3.07 opt uncut (2.76
opt cut) over a true width of 3.6 feet.

In addition to the underground drilling program, the joint venture completed one pilot hole and three wedge holes from
surface on the HM property. High-grade mineralization was intersected in three of the four holes including 1.36 opt over
5.0 feet in hole AK08-2W4, 0.25 opt over 41.1 feet in hole AK09-2W5 and 1.74 opt over 4.8 feet in hole AK09-2W6. These
intersections occur between the -5825 and -6480 elevations. Although the intercepts are at elevations similar to the
South Mine Complex to the west, it is too early to determine the relationship between the above intersections and the
SMC.

"Drilling from the -5300 level at Macassa continues to return high grade gold mineralization," said Stewart Carmichael,
KL Gold's Chief Exploration Geologist. He added, "This has been complemented by Queenston's surface drilling program
which shows gold mineralization to be present east of the South Mine Complex."

Charles Page, President and CEO of Queenston commented, "The new holes from the underground drilling program have again
displayed significant growth of the high-grade, South Mine Complex well into the Joint Venture property where it remains
open. We are further pleased with the surface drilling results on adjacent HM property, where new zones of gold
mineralization have been intersected some 1,000 to 1,300 feet east and on trend with the South Mine Complex."

Highlights of the current results:

- Drill hole 53-1366 intersected the New South Zone 100 feet down-dip of previously released drill hole 53-1203
representing both the furthest south intersection to date on the Joint Venture property as well as the deepest
intersection to date at the -5755 elevation. Drill hole 53-1364 (5.12 opt over a true width of 6.3 feet) intersected the
New South Zone 105 feet west of 53-1203 and 53-1365 (5.11 opt over a true width of 6.1 feet) intersected the New South
Zone 125 feet east of 53-1203. (To see figure 1 please click on the following link:
http://media3.marketwire.com/docs/1124kgi.jpg)

- Surface drill hole AK09-2W6 intersected a New Zone grading 1.74 opt over 4.8 feet on the HM joint venture property
approximately 1,300 feet east and on trend of the existing mineral resource on the South Mine Complex.

- Additional underground drilling from the Macassa -5300 foot level along the Macassa-South Claims boundary is expected
to begin later this year or early next year.

The figure referred to in this release may be viewed at KL Gold's and Queenston's websites, www.klgold.com or
www.queenston.ca, and will provide context to the above statements. Figure 1 is a plan view showing the latest drilling
results.

The following table summarizes the latest underground drilling results from the SMC in Imperial units:

/T/

----------------------------------------------------------------------------
                                     HOLE   AZI-
                                      DIP  MUTH
DRILL                 FROM       TO  (deg- (deg-  ASSAY
HOLE No. ZONE        (feet)   (feet) rees) rees) (ounces per ton/feet)
----------------------------------------------------------------------------
53-1362  Fault Zone  583.0    644.0     0   147   No significant values,
                                                   major fault located
----------------------------------------------------------------------------
53-1363  New South   411.0    413.0   -88   147   0.18/2.0 ft CL, TW not
                                                   calculated
----------------------------------------------------------------------------
53-1364  New South   444.7    451.8   -75   205   5.12/7.1 ft CL=6.3 ft TW,
                                                   Uncut
                                                  3.47/7.1 ft CL=6.3 ft TW,
                                                   Cut
         Incl.       449.0    450.5               14.76/1.5 ft CL=1.3 ft TW,
                                                   VG
         and         450.5    451.8               7.50/1.3 ft CL=1.2 ft TW,
                                                   VG
----------------------------------------------------------------------------
53-1365  New South   464.8    472.0   -73   087   5.11/7.2 ft CL=6.1 ft TW,
                                                   Uncut
                                                  3.92/7.2 ft CL=6.1 ft TW,
                                                   Cut
         Incl.       467.0    469.5               10.63/2.5 ft CL=2.1 ft TW
----------------------------------------------------------------------------
53-1366  New South   481.7    483.0   -68   147   0.35/1.3 ft CL=?? ft TW
          HW
         New South   494.0    495.5               0.63/1.5 ft CL=?? ft TW
          HW
        New South    533.0    537.9               3.07/4.9 ft CL=3.6 ft TW,
                                                   Uncut
                                                  2.76/4.9 ft CL=3.6 ft TW,
                                                   Cut
        Incl.        535.0    536.5               8.20/1.5 ft CL=1.1 ft TW
        Footwall     604.7    606.0               0.41/1.3 ft CL=?? ft TW
        Footwall     620.0    623.0               0.69/3.0 ft CL=?? ft TW
----------------------------------------------------------------------------

TW = True Width CL = Core Length VG = Visible Gold HW = Hanging Wall
CUT = cut to 7.2 opt

/T/

The following table summarizes the latest surface drilling results from the HM property in Imperial units:

/T/

----------------------------------------------------------------------------
                                     HOLE   AZI-
                                      DIP  MUTH
DRILL                 FROM       TO  (deg- (deg-  ASSAY
HOLE No. ZONE        (feet)   (feet) rees) rees) (ounces per ton/feet)
----------------------------------------------------------------------------
AK08-2W4 New Zone  6,358.9  6,363.9 -61.2 323.6   1.36/5.0 ft CL=?? ft TW
----------------------------------------------------------------------------
AK09-2W5 New Zone  6,564.8  6,605.9 -69.9 334.9   0.25/41.1 ft CL=?? ft TW
         Incl.     6,564.8  6,566.6               1.49/1.8 ft CL=?? ft TW
         and       6,566.6  5,569.8               0.28/3.2 ft CL=?? ft TW
         and       6,599.4  6,602.6               0.45/3.2 ft=?? ft TW
         New Zone  6,632.2  6,642.0               0.09/9.8 ft=?? ft TW
----------------------------------------------------------------------------
AK09-2W6 New Zone  6,612.5  6,635.4 -70.1 349.9   0.08/22.9 ft CL=?? ft TW
         New Zone  7,045.4  7,050.2               1.74/4.8 ft CL=?? ft TW
         Incl.     7,048.7  7,050.2               4.13/1.5 ft=?? ft TW, VG
----------------------------------------------------------------------------
AK08-04A New Zone  7,737.5  7,739.7 -83.8 326.5   0.11/2.2 ft CL=?? ft TW
         New Zone  7,891.2  7,892.8               0.19/1.6 ft CL=?? ft TW
----------------------------------------------------------------------------

TW = True Width CL = Core Length VG = Visible Gold HW = Hanging Wall
CUT = cut to 7.2 opt
?? TW = True Width Undetermined

/T/

The following table summarizes the latest underground results from the SMC in Metric units:

/T/

----------------------------------------------------------------------------
                                     HOLE   AZI-
                                      DIP  MUTH
DRILL                 FROM       TO  (deg- (deg-  ASSAY
HOLE No. ZONE           (m)      (m) rees) rees) (grams per tonne/m)
----------------------------------------------------------------------------
53-1362  Fault Zone  177.7    196.3     0   147   No significant values,
                                                   major fault located
----------------------------------------------------------------------------
53-1363  New South   125.3    125.9   -88   147   6.17/0.6m CL, TW not
                                                   calculated
----------------------------------------------------------------------------
53-1364  New South   135.6    137.7   -75   205   175.54/2.1m CL=1.9m TW,
                                                   Uncut
                                                  118.97/2.1m CL=1.9m TW,
                                                   Cut
         Incl.       136.9    137.3               506.06/0.4m CL=0.4m TW,
                                                   VG
         and         137.3    137.7               257.15/0.4m CL=0.4m TW,
                                                   VG
----------------------------------------------------------------------------
53-1365  New South   141.7    143.9   -73   087   175.20/2.2m CL=1.9m TW,
                                                   Uncut
                                                  134.40/2.2m CL =1.9m TW,
                                                   Cut
         Incl.       142.4    143.1               364.46/0.7m CL=0.6m TW
----------------------------------------------------------------------------
53-1366  New South   146.9    147.3   -68   147   12.00/0.4m CL=??m TW
          HW
         New South   150.6    151.1               21.60/0.5m CL=??m TW
          HW
         New South   162.5    164.0               105.26/1.5m CL=1.1m TW,
                                                   Uncut
                                                  94.63/1.5m CL=1.1m TW,
                                                   Cut
         Incl.       163.1    163.6               281.1/0.5m CL=0.3m TW
         Footwall    184.4    184.8               14.06/0.4m CL=??m TW
         Footwall    189.0    189.9               23.66/0.9m CL=??m TW
----------------------------------------------------------------------------

TW = True Width CL = Core Length VG = Visible Gold HW = Hanging Wall
CUT = cut to 246.9 grams/tonne
?? TW = True Width Undetermined

/T/

The following table summarizes the latest surface drilling results from the HM property in Metric units:

/T/

----------------------------------------------------------------------------
                                     HOLE   AZI-
                                      DIP  MUTH
DRILL                 FROM       TO  (deg- (deg-  ASSAY
HOLE No. ZONE           (m)      (m) rees) rees) (grams per tonne/m)
----------------------------------------------------------------------------
AK08-2W4 New Zone   1938.7   1940.2 -61.2 323.6   46.77/1.5m CL=??m TW
----------------------------------------------------------------------------
AK09-2W5 New Zone  2001.45   2014.0 -69.9 334.9   8.48/12.55m CL=??m TW
         Incl.     2001.45   2002.0               51.07/0.55m CL=??m TW
         and        2002.0   2003.0               9.69/1.00m CL=??m TW
         and        2012.0   2013.0               15.35/1.00m=?? TW
         New Zone   2022.0   2025.0               3.12/3.0m=??m TW
----------------------------------------------------------------------------
AK09-2W6 New Zone   2016.0   2023.0 -70.1 349.9   2.59/7.0m CL=??m TW
         New Zone   2148.0  2149.45               59.50/1.45m CL=??m TW
         Incl.      2149.0  2149.45               141.58/0.45m=??m TW, VG
----------------------------------------------------------------------------
AK08-04A New Zone   2359.0  2359.65 -83.8 326.5   3.71/0.65m CL=??m TW
         New Zone  2405.85  2406.35               6.38/0.50m CL=??m TW
----------------------------------------------------------------------------

TW = True Width CL = Core Length VG = Visible Gold HW = Hanging Wall
CUT = cut to 246.9 grams/tonne
?? TW = True Width Undetermined

/T/

The South Claims were purchased by KL Gold and Queenston in April of 2007 to cover the potential down-dip extension of
the SMC. To date, the SMC has been outlined over a strike length 2,500 feet on the property holdings of KL Gold to the
north and west of the South Claims (see KL Gold and Queenston press releases dated April 17, 2007). A joint venture was
formed between KL Gold and Queenston in 2007 and an underground diamond drilling program commenced on the South Claims.
In February, the joint venture drilling intersected the down-dip extension of the SMC on the property (see news releases
dated February 13, 2008, November 18, 2008 and March 18, 2009).

An updated resource estimate for the South Claims joint venture was released July 15, 2009 outlining an indicated
resource of 73,000 tons grading 1.24 opt and an inferred resource of 125,000 tons grading 1.23 opt. The reserves and
resources were calculated by Glenn R. Clark, P.Eng. in a technical report entitled Review of Resources on South Claims
Property, Kirkland Lake, Ontario dated July 17, 2009 and disclosed in Queenston's news release dated July 15, 2009, This
report is available on SEDAR (www.sedar.com) under Queenston's filings.

The above resource estimates were also included as part of a broader report prepared for KL Gold dated July 16, 2009
entitled Review of Resources and Reserves of Macassa Mine, Kirkland Lake, Ontario prepared by Glenn R. Clark, P. Eng.
This report is available on SEDAR (www.sedar.com) under KL Gold's filings and was disclosed in a KL Gold news release
dated July 15, 2009.

The HM property was purchased by KL Gold and Queenston in February 2009 to cover the potential eastern extension of the
SMC (see KL Gold and Queenston press release dated February 12, 2009).

KL Gold's Cautionary Note Regarding NI 43-101

The disclosure attributed in this release to KL Gold has been reviewed, verified (including sampling, analytical and
test data) and compiled by its geological staff, one of whom, Stewart Carmichael, P.Geo., KL Gold's Chief Exploration
Geologist, is a 'qualified person' for the purpose of National Instrument 43-101, Standards of Disclosure for Mineral
Projects, of the Canadian Securities Administrators. Mr. Carmichael also supervised the preparation of the information
that forms the basis of the technical disclosure in this release.

Queenston's Cautionary Note Regarding NI 43-101

The disclosure attributed in this release to Queenston has been reviewed, verified (including review of sampling,
analytical and test data) and compiled by Frank Ploeger, P. Geo., a 'qualified person', for the purpose of National
Instrument 43-101, Standards of Disclosure for Mineral Projects, of the Canadian Securities Administrators. Mr. Ploeger
also assisted in the preparation of the information that forms the basis of the technical disclosure in this release.

Quality Assurance & Control

KL Gold and Queenston have implemented a quality assurance and control (QA/QC) program to ensure sampling and analysis
of all exploration work is conducted in accordance with the best possible practices. The drill core is sawn in half with
half of the core samples shipped to the Swastika Laboratories in Swastika, Ontario or to Polymet Resources Inc in
Cobalt, Ontario. The other half of the core is retained for future assay verification. Other QA/QC includes the
insertion of blanks, and the regular re-assaying of pulps/rejects at alternate certified labs (Polymet Resources Inc.,
Swastika Laboratories). Gold analysis is conducted by fire assay using atomic absorption or gravimetric finish. The
laboratory re-assays at least 10% of all samples and additional checks may be run on anomalous values.

About Kirkland Lake Gold Inc.

Kirkland Lake Gold Inc. purchased the Macassa Mine and the 1,500 ton per day mill along with four former producing gold
properties - Kirkland Lake, Teck-Hughes, Lake Shore and Wright Hargreaves - in December 2001. These properties, which
have historically produced some 22 million ounces of gold, extend over seven kilometres between the Macassa Mine on the
west and Wright Hargreaves on the east and, for the first time, are being developed and explored under one owner. This
camp is located in the Southern Abitibi Greenstone Belt of Kirkland Lake, Ontario, Canada.

About Queenston Mining Inc.

Queenston maintains a significant land package in the Kirkland Lake gold camp containing 21 contiguous properties
totalling approximately 14,000 hectares or 942 mineral claim units. The Company strategy is to return to producer status
through the development of 100% owned gold projects including the Upper Beaver, McBean, Anoki and Upper Canada. The
Company is also carrying out deep exploration targeting the new South Mine Complex with joint venture partner Kirkland
Lake Gold Inc. on the South Claims and HM property and on its 100% owned AK property. Queenston is well financed with
working capital in excess of $40 million and has an exploration budget for the balance of 2009 and all of 2010 of $17
million.

Cautionary Note Regarding Forward Looking Statements

This Press Release may contain statements which constitute 'forward-looking, including statements regarding the plans,
intentions, beliefs and current expectations of the companies, and their directors, or officers with respect to the
future business activities and operating performance of the companies. The words "may", "would", "could", "will",
"intend", "plan", "anticipate", "believe", "estimate", "expect" and similar expressions, as they relate to the
companies, or its management, are intended to identify such forward-looking statements. Investors are cautioned that any
such forward-looking statements are not guarantees of future business activities or performance and involve risks and
uncertainties, and that the companies' future business activities may differ materially from those in the forward-
looking statements as a result of various factors. Such risks, uncertainties and factors are described in the periodic
filings with the Canadian securities regulatory authorities, including the companies' Annual Information Form and
quarterly and annual Management's Discussion & Analysis, which may be viewed on SEDAR at www.sedar.com. Should one or
more of these risks or uncertainties materialize, or should assumptions underlying the forward-looking statements prove
incorrect, actual results may vary materially from those described herein as intended, planned, anticipated, believed,
estimated or expected. Although the companies have attempted to identify important risks, uncertainties and factors
which could cause actual results to differ materially, there may be others that cause results not be as anticipated,
estimated or intended. The companies do not intend, and do not assume any obligation, to update these forward-looking
statements.


-30-

FOR FURTHER INFORMATION PLEASE CONTACT:

Kirkland Lake Gold Inc.
Brian Hinchcliffe
President
705-567-5208
705-568-6444 (FAX)
bhinchcliffe@klgold.com

OR

Kirkland Lake Gold Inc.
Scott Koyich
Investor Relations
403-215-5979
info@klgold.com
www.klgold.com

OR

Pelham Public Relations
Chelsea Hayes
020 7737 6675
chelsea.hayes@pelhampr.com

OR

NOMAD: Panmure Gordon (UK) Limited
Dominic Morley/Ashton Clanfield
+44 020 7459 3600
dominic.morley@panmure.com

OR

Ocean Equities Ltd.
Guy Wilkes
+44 207 786 4370
guywilkes@oceanequities.co.uk

OR

Queenston Mining Inc.
Charles E. Page, P. Geo.
President and CEO
416-364-0001

OR

Queenston Mining Inc.
Hugh D. Harbinson
Chairman
416-364-0001
416-364-5098 (FAX)

OR

Queenston Mining Inc.
Andreas Curkovic
Investor Relations
416-577-9927
info@queenston.ca
www.queenston.ca

Neither the Toronto Stock Exchange nor the AIM Market of the London Stock Exchange has reviewed and neither accepts
responsibility for the adequacy or accuracy of this news release.

-0-

Contact Information

  • Kirkland Lake Gold Inc.