Solex Resources Corp.
TSX VENTURE : SOX

Solex Resources Corp.
Frontier Pacific Mining Corporation
TSX VENTURE : FRP

Frontier Pacific Mining Corporation

November 14, 2007 09:30 ET

Solex Resources Corp. and Frontier Pacific Mining Corporation: Very Encouraging Initial Drill Results at the Sayana Central Prospect, Macusani Uranium Project, Peru

VANCOUVER, BRITISH COLUMBIA--(Marketwire - Nov. 14, 2007) - Frontier Pacific Mining Corporation (TSX VENTURE:FRP) ("Frontier Pacific"), (the Operator") and Solex Resources Corp. (TSX VENTURE:SOX) ("Solex"), (collectively the "Venture Participants") are pleased to report very encouraging initial results from the first 24 holes on the Sayana Central near-surface uranium target.

Sayana Central Results

HIGHLIGHTS

- 9m @ 2.2 lbs/ton (0.108%) U3O8 (in drillhole SY07-19)

- 2m @ 5.9 lbs/ton (0.297%) U3O8 (in drillhole SY07-20)

- 5m @ 2.6 lbs/ton (0.129%) U3O8 (in drillhole SY07-14)

- 5m @ 2.1 lbs/ton (0.107%) U3O8 (in drillhole SY07-08)

- 3m @ 2.6 lbs/ton (0.127%) U3O8 (in drillhole SY07-06)

The 73-hole drill program at Sayana Central has been completed. Assay results from the remaining drill holes on Sayana Central are expected within 4 to 6 weeks at which point a complete analysis of the uranium resource potential will be undertaken.

Results from the Sayana Central drilling constituted part of the completed 2007 US$2.5 million, 20,000 metre, 500 hole drill program to test the first seven targets of the extensive Macusani Uranium Project in Southern Peru.

The first 24 drill holes targeted the North-South radiometric anomaly at Sayana Central and confirmed a near-surface, flat lying ignimbrite volcanic flow (type T2) containing a weighted average grade of 0.053% U3O8 (531 ppm U3O8) or 1.06 pounds per ton (U3O8) over a stratigraphic thickness of 3.5 metres over an area measuring 800 metres by 150 metres in plan view.

The drill results show excellent continuity of uranium grade within a sub-vertical structural corridor preferentially hosted within the ignimbrite flow. Mineralization is open to the south and at depth.

Uranium mineralization found in the drilling at Sayana Central occurs as several mineralogical types, disseminated between tuffaceous fragments and within congealing fracture fillings related to cooling of the near-surface flows. In several locations the favourable uraniferous ignimbrite flows appear stacked one on top of the other and separated in most cases by barren or low grade ignimbrites.



Drill results from the Sayana Central Prospect

(Drillhole collar and survey information can be found posted on both the
Frontier Pacific and Solex Resources websites.)

---------------------------------------------------------------------------
To U3O8 U3O8 U3O8
Hole ID From (m) (m) Interval (m) ppm % lbs/ton (short)
---------------------------------------------------------------------------
---------------------------------------------------------------------------
SY06-01 3.5 7.5 4.0 499 0.050 1.00
---------------------------------------------------------------------------
SY06-01 13.5 14.5 1.0 302 0.030 0.60
---------------------------------------------------------------------------
SY06-01 24.5 25.5 1.0 213 0.021 0.43
---------------------------------------------------------------------------
SY06-02 0.9 2.5 1.6 3067 0.307 6.13
---------------------------------------------------------------------------
SY06-03 6.5 8.5 2.0 335 0.033 0.67
---------------------------------------------------------------------------
SY06-04 NSI
---------------------------------------------------------------------------
SY06-05 2.5 7.5 5.0 2745 0.274 5.49
---------------------------------------------------------------------------
SY06-05 21.5 27.5 6.0 1179 0.118 2.36
---------------------------------------------------------------------------
SY06-06 5.9 10.9 5.0 273 0.027 0.55
---------------------------------------------------------------------------
SY06-07 3.7 8.7 5.0 675 0.067 1.35
---------------------------------------------------------------------------
SY06-07 12.7 16.7 4.0 250 0.025 0.50
---------------------------------------------------------------------------
SY06-08 7.5 12.5 5.0 726 0.073 1.45
---------------------------------------------------------------------------
SY06-08 15.5 16.5 1.0 171 0.017 0.34
---------------------------------------------------------------------------
SY07-01(i) 15.0 16.0 1.0 95 0.009 0.19
---------------------------------------------------------------------------
SY07-02 18.0 21.0 3.0 113 0.011 0.23
---------------------------------------------------------------------------
SY07-03(i) 63.0 64.0 1.0 55 0.006 0.11
---------------------------------------------------------------------------
SY07-04(i) 14.0 15.0 1.0 83 0.008 0.17
---------------------------------------------------------------------------
SY07-05 7.0 8.0 1.0 165 0.017 0.33
---------------------------------------------------------------------------
SY07-05 12.0 15.0 3.0 748 0.075 1.50
---------------------------------------------------------------------------
SY07-05 27.0 30.0 3.0 431 0.043 0.86
---------------------------------------------------------------------------
SY07-05 33.0 37.0 4.0 350 0.035 0.70
---------------------------------------------------------------------------
SY07-05 57.0 58.0 1.0 150 0.015 0.30
---------------------------------------------------------------------------
SY07-05 61.0 64.0 3.0 147 0.015 0.29
---------------------------------------------------------------------------
SY07-06 1.5 3.0 1.5 122 0.012 0.24
---------------------------------------------------------------------------
SY07-06 8.0 16.0 8.0 216 0.022 0.43
---------------------------------------------------------------------------
SY07-06 20.0 23.0 3.0 1274 0.127 2.55
---------------------------------------------------------------------------
SY07-07 43.0 44.0 1.0 102 0.010 0.20
---------------------------------------------------------------------------
SY07-07 58.0 59.0 1.0 248 0.025 0.50
---------------------------------------------------------------------------
SY07-08 1.0 5.0 4.0 670 0.067 1.34
---------------------------------------------------------------------------
SY07-08 17.0 22.0 5.0 1072 0.107 2.14
---------------------------------------------------------------------------
SY07-08 36.0 37.0 1.0 253 0.025 0.51
---------------------------------------------------------------------------
SY07-08 42.0 44.0 2.0 330 0.033 0.66
---------------------------------------------------------------------------
SY07-08 62.0 63.0 1.0 112 0.011 0.22
---------------------------------------------------------------------------
SY07-08 73.0 74.0 1.0 143 0.014 0.29
---------------------------------------------------------------------------
SY07-08 87.0 94.0 7.0 248 0.025 0.50
---------------------------------------------------------------------------
SY07-09 3.0 4.0 1.0 116 0.012 0.23
---------------------------------------------------------------------------
SY07-09 95.0 96.0 1.0 150 0.015 0.30
---------------------------------------------------------------------------
SY07-10 18.0 23.0 5.0 204 0.020 0.41
---------------------------------------------------------------------------
SY07-10 33.0 34.0 1.0 496 0.050 0.99
---------------------------------------------------------------------------
SY07-10 48.0 55.0 7.0 109 0.011 0.22
---------------------------------------------------------------------------
SY07-11(i) 59.0 60.0 1.0 78 0.008 0.16
---------------------------------------------------------------------------
SY07-12 17.0 22.0 5.0 188 0.019 0.38
---------------------------------------------------------------------------
SY07-12 26.0 28.0 2.0 132 0.013 0.26
---------------------------------------------------------------------------
SY07-12 55.0 57.0 2.0 133 0.013 0.27
---------------------------------------------------------------------------
SY07-13 45.0 50.0 5.0 139 0.014 0.28
---------------------------------------------------------------------------
SY07-13 66.0 73.0 7.0 147 0.015 0.29
---------------------------------------------------------------------------
SY07-14 12.0 13.0 1.0 102 0.010 0.20
---------------------------------------------------------------------------
SY07-14 31.0 36.0 5.0 1289 0.129 2.58
---------------------------------------------------------------------------
SY07-15 4.0 5.0 1.0 110 0.011 0.22
---------------------------------------------------------------------------
SY07-15 64.0 65.0 1.0 102 0.010 0.20
---------------------------------------------------------------------------
SY07-16 20.0 25.0 5.0 960 0.096 1.92
---------------------------------------------------------------------------
SY07-16 30.0 40.0 10.0 141 0.014 0.28
---------------------------------------------------------------------------
SY07-16 44.0 45.0 1.0 301 0.030 0.60
---------------------------------------------------------------------------
SY07-17 5.0 6.0 1.0 159 0.016 0.32
---------------------------------------------------------------------------
SY07-17 13.0 16.0 3.0 797 0.080 1.59
---------------------------------------------------------------------------
SY07-17 22.0 23.0 1.0 369 0.037 0.74
---------------------------------------------------------------------------
SY07-18 1.1 5.0 3.9 667 0.067 1.33
---------------------------------------------------------------------------
SY07-18 9.0 11.0 2.0 199 0.020 0.40
---------------------------------------------------------------------------
SY07-18 47.0 48.0 1.0 164 0.016 0.33
---------------------------------------------------------------------------
SY07-19 0.8 10.0 9.2 1084 0.108 2.17
---------------------------------------------------------------------------
SY07-20 6.0 8.0 2.0 2972 0.297 5.94
---------------------------------------------------------------------------
SY07-20 25.0 26.0 1.0 609 0.061 1.22
---------------------------------------------------------------------------
SY07-21 10.0 11.0 1.0 145 0.015 0.29
---------------------------------------------------------------------------
SY07-21 19.0 20.0 1.0 214 0.021 0.43
---------------------------------------------------------------------------
SY07-21 41.0 42.0 1.0 149 0.015 0.30
---------------------------------------------------------------------------
SY07-22 44.0 45.0 1.0 343 0.034 0.69
---------------------------------------------------------------------------
SY07-23 13.0 14.0 1.0 121 0.012 0.24
---------------------------------------------------------------------------
SY07-23 18.0 23.0 5.0 115 0.011 0.23
---------------------------------------------------------------------------
SY07-23 38.0 40.0 2.0 113 0.011 0.23
---------------------------------------------------------------------------
SY07-23 48.0 49.0 1.0 270 0.027 0.54
---------------------------------------------------------------------------
SY07-23 59.0 60.0 1.0 119 0.012 0.24
---------------------------------------------------------------------------
SY07-24 5.0 6.0 1.0 104 0.010 0.21
---------------------------------------------------------------------------
SY07-24 14.0 15.0 1.0 257 0.026 0.51
---------------------------------------------------------------------------
SY07-24 24.0 25.0 1.0 396 0.040 0.79
---------------------------------------------------------------------------
SY07-24 30.0 31.0 1.0 275 0.027 0.55
---------------------------------------------------------------------------
SY07-24 40.0 41.0 1.0 269 0.027 0.54
---------------------------------------------------------------------------

NOTE: Lower cut-off grade equals 0.01% (or 100ppm) U3O8 for 0.200lbs/ton;
No top cut was applied.
(i) For completeness: - Holes SY07-01, SY07-03, SY07-04, and SY07-11 used a
lower cut-off grade equals 0.005% (50ppm) U3O8 for 0.1lbs/ton


The balance of drilling (49 holes) at Sayana Central tested the 1,000 metre Southwest-Northeast trending radiometric anomaly that intersects the North-South radiometric anomaly in the northern part of Sayana Central. A follow-up news release will be made once all the remaining results have been received.

The application for drill permits to further delineate and define the mineralization and potential resource at Sayana Central has begun. A follow-up drill program will be included as part of the 2008 (20,000 metre) drill program scheduled to begin during the first quarter of 2008.

Coarse Ore Column Leaching

The Operator has contracted SGS Lakefield Research Limited under the direction of Melis Engineering of Saskatoon, Saskatchewan, to carry out Column Leach and Yellowcake Precipitation tests on ore from the Macusani Joint Venture Project in Southern Peru.

The testing, scheduled to take up to 6 months, will be performed on various crush sizes of uranium ores from Calvario I, Calvario III and Sayana Central targets and the results will provide further confirmation that the Macusani ores are ideal for the application of Heap Leaching Techniques. Previous bottle roll tests in 2006 showed that up to 99.4% of the uranium was extracted over a period of 16 days using a mild acid solution. Confirmation of the ability to heap leach the Macusani ores will greatly assist in evaluating the capital and operating costs of mining and processing the uranium within the Macusani district. Typically, costs for bulk mining and processing heap leachable ores are at the very low end of production cash and capital costs throughout the mining business.

Ian F. Laurent, M.Econ.Geol. MAIG (Vice President - Exploration; Frontier Pacific), is a member of the Australian Institute of Geoscientists, a Competent Person, responsible for the technical content of this news release and a Qualified Person under Canadian Securities Administrators National Instrument 43-101. Peter F. Tegart, P.Geo, and Jonathan Challis, FIMMM, are Qualified Persons under Canadian Securities Administrators National Instrument 43-101 policies and are responsible for the contents of this news release.

On Behalf of the Board of Directors of

FRONTIER PACIFIC MINING CORPORATION

Peter F. Tegart, P. Geo., President & CEO

On Behalf of the Board of Directors of

SOLEX RESOURCES CORP.

Jonathan Challis, President & Director

This news release may contain forward-looking statements that are based on Frontier Pacific or Solex expectations, estimates and projections regarding its business and the economic environment in which it operates. These statements are not guarantees of future performance and involve risks and uncertainties that are difficult to control or predict. Therefore, actual outcomes and results may differ materially from those expressed in these forward-looking statements and readers should not place undue reliance on such statements. Statements speak only as of the date on which they are made, and the Company undertakes no obligation to update them publicly to reflect new information or the occurrence of future events or circumstances, unless otherwise required to do so by law.

The TSX Venture Exchange (the "Exchange") has not reviewed and does not accept responsibility for the accuracy or adequacy of this news release. The Exchange has in no way passed upon the merits of the proposed transaction and has neither approved nor disapproved the contents of this press release.

Contact Information