Cadillac Announces Drilling Results at K1-1 Project at Thierry Property

TORONTO, ONTARIO--(Marketwire - Jan. 25, 2012) - Cadillac Ventures Inc. (TSX VENTURE:CDC) ("Cadillac" or the "Company") is pleased to announce results for holes K-11-25 through K-11-32 drilled on the K1-1 open pit project at its Thierry Mine property, located in Northwestern Ontario. Highlights of results appear in the table below, including 825 feet assaying at 0.4% Cu and 2.15 g/t Ag (Silver) in drillhole KH-11-28.

"Cadillac continues to be pleased with the ongoing positive results from the K1-1 open pit drill program, and the resultant positive impact on the existing resource. In addition management is evaluating the impact of the notable silver results being obtained in this program, another "value add" for the combination of the Thierry Mine Project and the K1-1 Open Pit project on the Thierry Property," stated Norman Brewster, President and CEO of Cadillac.

To view the map associated with this press release, "Location of K1-1 Deposit," please visit the following link: http://www.marketwire.com/library/20120124-CDC2501map1.jpg.

The K1-1 project is located approximately 3 kms to the east of the Thierry Mine project, both being within the boundaries of the 11,538 acre Thierry property, occupying only a small portion of the property. In late 2011, the Company released an initial inferred mineral resource estimate for K1-1 within a Whittle pit shell consisting of: 19,897,000 tonnes grading 0.42% Cu, 0.10% Ni, 2.0 g/t Ag, 0.03 g/t Au, 0.05 g/t Pt, 0.15 g/t Pd and an Exploration Target for K1-1 located outside and below the resource pit shell of: 45-55 million tonnes grading between 0.32 to 0.36% Cu, and 0.08 to 0.12% Ni. The 26 hole drill program was designed to address gaps within the pit shell area, as well as test for extensions along strike and at depth. Depicted below are the seven drillholes being reported in this press release, relative to the grey pit shell and the contained resources (not visible). The exploration target resource, contained in 7 mineralized horizons, depicted as coloured bands (green, light blue, red, purple, blue, peach, pink) occurs outside of the light grey pit shell and below the dark grey surface. The drilling was designed to upgrade mineralization from the exploration target category into the resource statement, and if successful add tonnage to both categories, using infill drilling. The illustration below shows the drillhole trace in yellow, some of which were collared in the pit, extending below the pit and the currently modeled mineralized envelopes. Recalculation of the resource, incorporating these drill results, is expected to result in an increase to the resource by the extension of the modeled mineralization.

To view the map associated with this press release, "K1-1 3D model of pits and mineralization with holes K-11-25 thru K-11-32," please visit the following link: http://www.marketwire.com/library/20120124-CDC2501map2.jpg.

The highlights of the assays results received to date are included in the following table;

Hole			From		To		Length ft		Cu%		Ni%		Ag g/t		PGEs and notes
K-11-25			520		770		250		0.338		0.076		2.06
	including		520		555		35		0.423		0.072		2.29
	including		630		655		25		0.435		0.143		2.3
	K-11-25		690		770		80		0.424		0.076		2.67
	including		735		760		25		0.617		0.09		3.46
K-11-26			518.75		1325		806.25		0.374		0.091		1.98
	including		518.75		575		56.25		0.654		0.112		3.66
	including		630		660		30		0.313		0.069		1.5
	including		690		795		105		0.508		0.096		2.09
	including		825		955		130		0.421		0.098		1.95
	including		1010		1220		210		0.417		0.109		2.28
	including		1230		1270		40		0.324		0.09		2.31
K-11-27			415		1005		585		0.345		0.055		1.79
	including		415		535		120		0.652		0.077		3.71		0.25g/t Pd
	including		580		615		35		0.452		0.063		2.39
	including		695		740		45		0.549		0.06		2.57		0.20g/t Pd
	including		765		795		30		0.33		0.039		1.03
	including		915		945		30		0.388		0.093		1.97
	including		995		1005		10		0.484		0.074		3.2
K-11-28			495		1320		825		0.4		0.096		2.15
	K-11-28		495		605		110		0.519		0.113		2.77
	including		495		550		55		0.6		0.155		3.43		0.30g/t Pd
	including		720		925		205		0.522		0.102		2.52
	including		1010		1015		5		1.33		0.099		4.7
	including		1150		1175		25		0.521		0.096		3.1
K-11-29			395		520		125		0.314		0.05		2.5
	including		395		420		25		0.424		0.059		3.16
	including		440		470		30		0.346		0.048		2.48
K-11-29			845		885		40		0.441		0.015		3.19
K-11-29			1010		1020		10		0.552		0.12		2.25
K-11-30			515		550		35		0.325		0.047		1.97
K-11-30			675		967.7		292.7		0.355		0.078		1.17
	including		715		755		40		0.416		0.082		1.3
	including		772		815		43		0.395		0.076		1.27
	including		835		935		100		0.409		0.096		2.07
K-11-30			1015		1045		30		0.461		0.108		2.23
K-11-30			1140		1170		30		0.361		0.094		1.93
K-11-31			165		180		15		0.584		0.1		3.47
K-11-31			285		655		370		0.372		0.097		1.33
	K-11-31		325		420		95		0.478		0.089		1.87
	including		345		415		70		0.506		0.098		2.14
	including		505		540		35		0.475		0.14		1.99
	including		625		645		20		0.346		0.125		1.05		1.04g/t Au
K-11-31			690		780		90		0.406		0.106		1.42
K-11-31			825		850		25		0.38		0.112		1.28
K-11-32			278		325		47		0.328		0.121		1.75
K-11-32			390		410		20		0.382		0.106		2.43

In this program there was a total of 20,868 feet drilled over the twenty-six holes, and a total of 2,590 samples taken (excluding quality assurance and quality control sample protocols). Between holes KH-11-25 to KH-11-32 there were 1137 samples taken and assay results received. Of these samples 326 gave Cu values between 0.3 and 0.5%, 149 assayed between 0.5 and 1%, and 6 gave values over 1%.

A total of 278 samples assayed over 0.1% Ni. Two samples assayed over 0.5g/t Pd, both in hole K-11-28, 80 samples assayed between 0.2 and 0.5g/t Pd. Low level silver mineralization is common with 723 samples assaying over 1g/t Ag, including 12 samples over 5g/t Ag, all typically concurring with high Cu and Ni values.

The remainder of the assays will be released as received and tabulated. Once all of the assays are received the Company will be updating the initial K1-1 resource statement.

The samples were selected in the field, cut and bagged, sealed with a security seal and transferred by personnel from Billiken Management Services Inc. and bonded courier to the facilities of Agat Laboratories Ltd. in Sudbury, Ontario where they were processed using Total Digestion ICP(Total), with the over limit results further tested by Fire Assay ICPOES, and the gold, platinum and palladium tested by Fire Assay ICP.

Mr. Brian H. Newton, P.Geo, of Billiken Management Services Inc. and a "qualified person" pursuant to NI 43-101 has reviewed and approved the technical information in this press release on behalf of the Company.

About Cadillac

Cadillac is a development-focused copper company currently advancing its 100% owned Thierry Property, near Pickle Lake, Ontario. The Thierry Property consists of the past producing Thierry Mine and hosts two NI 43-101 compliant resources: Thierry Mine and K1-1.

Thierry Mine Deposit

The Thierry Mine is a past producing mine with a current resource estimate consisting of 8.3 million tonnes measured and indicated grading 1.73% Cu and 0.20% Ni, and 14.6 million tonnes inferred grading 1.70% Cu and 0.16% Ni, using a cut-off NSR of C$46.30/tonne. The deposit remains open at depth and to the west.

K1-1 Deposit

The K1-1 is a potentially open-pit, large tonnage, low grade deposit located approximately 3 km from the past producing Thierry Mine. The inferred mineral resource estimate for K1-1 within a Whittle pit shell consists of the following: 20 million tonnes grading 0.42% Cu, 0.10% Ni, 2.0 g/t Ag, 0.03 g/t Au, 0.05 g/t Pt, 0.15 g/t Pd. The K1-1 Deposit is open along strike and at depth.

For more information regarding Cadillac, please visit the Company's website at www.cadillacventures.com.

Forward Looking Statements

This news release contains forward-looking statements and information under applicable securities laws, including with respect to recalculation of the resource at K1-1 and the potential impact of drill results on the Thierry Mine Project. All statements, other than statements of historical fact, are forward looking. Forward-looking statements are frequently identified by such words as 'may', 'will', 'plan', 'expect', 'believe', 'anticipate', 'estimate', 'intend' and similar words referring to future events and results. Such statements and information are based on the current opinions and expectations of management. All forward-looking information is inherently uncertain and subject to a variety of assumptions, risks and uncertainties, including the speculative nature of mineral exploration and development, fluctuating commodity prices, the risks of obtaining necessary licences and permits and the availability of financing, as described in more detail in the Company's securities filings available at www.sedar.com. Actual events or results may differ materially from those projected in the forward-looking statements and the reader is cautioned against placing undue reliance thereon. Forward-looking information speaks only as of the date on which it is provided and Cadillac assumes no obligation to revise or update these forward-looking statements except as required by applicable law. All dollar amounts are in Canadian dollars unless otherwise noted.