Detour Gold Corporation
TSX : DGC

Detour Gold Corporation

October 20, 2015 17:00 ET

Detour Gold Reports Drilling Results from Lower Detour

TORONTO, ONTARIO--(Marketwired - Oct. 20, 2015) - Detour Gold Corporation (TSX:DGC) ("Detour Gold" or the "Company") reports initial results from its 2015 summer drilling program at Lower Detour, located approximately six kilometres south of its flagship Detour Lake gold mine.

The Company started the infill drilling program of 30,000 metres at 50 metres spacing in June 2015 to confirm the continuity and extent of the gold mineralization within Zone 58N. Results for the first 34 holes totaling 14,800 metres demonstrated continuity of the mineralization with visible gold observed in all but five holes. To date, gold mineralization has been intersected over an east-west strike length of 450 metres, from surface to a depth of 550 metres. The mineralized system remains open at depth and down plunge to the east.

Once the Company receives the results from the eastern and deeper holes and completes the interpretation of Zone 58N, it will be in a position to consider the option of proceeding with underground definition drilling and/or surface infill drilling of the upper portion of the deposit at a closer spacing.

"The excellent results from the first half of the infill drilling program are encouraging and once we receive the assays from the deeper holes of Zone 58N, we can better assess the underground potential of this high-grade target." said Paul Martin, President and CEO of Detour Gold. "The exploration successes at Detour Lake and Block A, and now at Lower Detour, highlight the potential for a significant mining camp on our large land package."

Significant Intercepts (uncut gold assay reported)

  • 6.46 g/t over 22.4 m (DLD-15-140)
  • 5.07 g/t over 30.5 m (DLD-15-142)
  • 7.53 g/t over 19 m, including 19.36 g/t over 5 m (DLD-15-146)
  • 3.71 g/t over 26 m, including 9.63 g/t over 7 m (DLD-15-151)
  • 14.72 g/t over 13.5 m, including 32.05 g/t over 6 m (DLD-15-157)
  • 9.68 g/t over 11.3 m, including 24.92 g/t over 4.2 m (DLD-15-165A)
  • 9.45 g/t over 14.9 m, including 17.20 g/t over 7 m (DLD-15-166)
  • 3.88 g/t over 23.7 m, including 7.55 g/t over 11 m (DLD-15-149)

Mineralization starts at near-surface (i.e. DLD-15-138 intersected 6.4 g/t over 13.0 metres, below 10 metres of overburden) and thus far extends to a vertical depth of approximately 550 metres (i.e. DLD-15-157 intersected 14.7 g/t over 13.5 metres).

Gold mineralization is mainly found within the southern portion of an altered feldspar porphyry intrusive characterized by brittle deformation, containing quartz and/or quartz-tourmaline veins with up to 5% pyrite and multiple occurrences of visible gold. The thickness of the feldspar porphyry can exceed 100 metres, although individual mineralized lenses are typically up to 30 metres in width. The feldspar porphyry narrows to the east and west near surface.

To view Long Section of Zone 58N, Lower Detour Area, open the following link: http://media3.marketwire.com/docs/Lower-Detour-Select-Sig-Assays-from-Zone-58N_15_10_20.pdf.

Technical Information

The drilling program is being managed by Guy MacGillivray, P.Geo., Exploration Manager of Detour Gold, a Qualified Person within the meaning of National Instrument 43-101. Mr. MacGillivray has verified and approved the data disclosed in this release, including the sampling, analytical and test data underlying the information. For this drilling campaign, samples are prepared at ALS Laboratories in Timmins and Sudbury and assayed at their Vancouver, B.C laboratory. Analysis for gold is done on sawn half core samples (size HQ or NQ) using 50 grams fire assay (AAS finish). Samples with higher grade gold (>3 g/t) or with visible gold are re-assayed using the pulp and fire assay with gravimetric finish procedures. The Company's quality control checks include the insertion of standard reference materials and blank samples to monitor the precision and accuracy of the assay data.

About Detour Gold

Detour Gold is an intermediate gold producer in Canada that holds a 100% interest in the Detour Lake mine, a long life large-scale open pit operation.

Forward-Looking Information

This press release contains certain forward-looking information as defined in applicable securities laws (referred to herein as "forward-looking statements"). Specifically, this press release contains forward-looking statements regarding the Company being in a position to consider the option of proceeding with underground definition drilling and/or surface infill drilling of the upper portion of the deposit at a closer spacing once the results from the eastern and deeper holes are received and the interpretation of Zone 58N is completed; the Company assessing the underground potential of this high-grade target once the assays from the deeper holes of Zone 58N are received; and the potential for a significant mining camp on Detour Gold's large land package. Forward-looking statements involve known and unknown risks, uncertainties and other factors which are beyond Detour Gold's ability to predict or control and may cause Detour Gold's actual results, performance or achievements to be materially different from any of its future results, performance or achievements expressed or implied by forward-looking statements.
These risks, uncertainties and other factors include, but are not limited to, gold price volatility, changes in debt and equity markets, the uncertainties involved in interpreting geological data, increases in costs, environmental compliance and changes in environmental legislation and regulation, interest rate and exchange rate fluctuations, general economic conditions and other risks involved in the gold exploration and development industry, as well as those risk factors discussed in the section entitled "Description of Business - Risk Factors" in Detour Gold's 2014 AIF and in the continuous disclosure documents filed by Detour Gold on and available on SEDAR at www.sedar.com. Such forward-looking statements are also based on a number of assumptions which may prove to be incorrect, including, but not limited to, assumptions about the following: the availability of financing for exploration and development activities; operating and capital costs; the Company's ability to attract and retain skilled staff; the mine development schedule; sensitivity to metal prices and other sensitivities; the supply and demand for, and the level and volatility of the price of, gold; timing of the receipt of regulatory and governmental approvals for development projects and other operations; the supply and availability of consumables and services; the exchange rates of the Canadian dollar to the U.S. dollar; energy and fuel costs; the accuracy of reserve and resource estimates and the assumptions on which the reserve and resource estimates are based; market competition; ongoing relations with employees and impacted communities and general business and economic conditions. Accordingly, readers should not place undue reliance on forward-looking statements. The forward-looking statements contained herein are made as of the date hereof, or such other date or dates specified in such statements. Detour Gold undertakes no obligation to update publicly or otherwise revise any forward-looking statements contained herein whether as a result of new information or future events or otherwise, except as may be required by law. If the Company does update one or more forward-looking statements, no inference should be drawn that it will make additional updates with respect to those or other forward-looking statements.

Significant Assay Results from 2015 Summer Drilling Program
Zone 58N, Lower Detour Area
Hole Number From To Au g/t Au g/t Cut Length m Domain
DLD-15-135 41.1 50.0 2.41 2.41 8.9 58N
Section 595530E
DLD-15-136 47.0 51.0 1.47 1.47 4.0 58N
Section 595480E
DLD-15-137 21.0 31.0 5.07 3.90 10.0 58N
Section 595530E Incl 24.0 25.0 41.70 30.00 1.0 58N
34.9 47.0 5.10 5.04 12.1 58N
Incl 44.8 46.0 30.60 30.00 1.2 58N
59.6 65.0 2.64 2.64 5.4 58N
DLD-15-138 104.0 108.0 2.43 2.43 4.0 58N
Section 595480E 124.5 125.0 8.82 8.82 0.5 58N
139.0 140.0 22.50 22.50 1.0 58N
144.0 146.0 5.57 5.57 2.0 58N
231.0 244.0 6.43 4.87 13.0 58N
Incl 238.0 239.0 50.30 30.00 1.0 58N
DLD-15-139A 273.5 274.5 1.04 1.04 1.0 75
Section 595530E 342.3 359.0 2.03 2.03 16.7 58N
DLD-15-140 34.6 57.0 6.46 5.48 22.4 58N
Section 595480E Incl 56.0 57.0 52.00 30.00 1.0 58N
112.0 115.6 6.87 6.06 3.6 58N
Incl 114.9 115.6 34.20 30.00 0.7 58N
195.0 198.5 40.74 8.34 3.5 58N
Incl 197.9 198.5 219.00 30.00 0.6 58N
203.8 205.0 7.01 7.01 1.2 58N
252.0 257.0 9.03 9.03 5.0 58N
DLD-15-141 75.0 82.0 4.62 4.62 7.0 58N
Section 595580E
DLD-15-142 249.0 250.0 0.19 0.19 1.0 75
Section 595480E 298.1 302.8 3.79 3.79 4.7 58N
307.0 315.0 2.19 2.19 8.0 58N
335.0 365.5 5.07 4.26 30.5 58N
Incl 349.0 350.0 32.70 30.00 1.0 58N
Incl 358.0 358.5 55.10 30.00 0.5 58N
Incl 365.0 365.5 48.90 30.00 0.5 58N
396.0 403.0 5.94 5.77 7.0 58N
Incl 401.0 402.0 31.20 30.00 1.0 58N
DLD-15-143 307.9 310.5 0.15 0.15 2.6 75
Section 595580E 348.5 352.5 11.70 8.38 4.0 58N
Incl 351.5 352.5 43.30 30.00 1.0 58N
DLD-15-144 40.3 42.0 21.62 14.23 1.7 75
Section 595580E Incl 41.5 42.0 55.10 30.00 0.5 75
54.0 64.0 3.93 3.93 10.0 75
72.0 77.0 1.18 1.18 5.0 58N
136.0 151.5 0.77 0.77 15.5 58N
DLD-15-145 108.6 111.8 10.56 10.56 3.2 75
Section 595580E 138.0 140.0 7.72 7.72 2.0
160.2 165.0 2.55 2.55 4.8 58N
229.0 233.0 3.70 3.70 4.0 58N
DLD-15-146 306.0 307.0 0.02 0.02 1.0 75
Section 595480E 405.0 424.0 7.53 6.84 19.0 58N
Incl 408.0 413.0 19.36 16.74 5.0 58N
DLD-15-147 81.9 84.2 2.12 2.12 2.3 75
Section 595680E 90.0 96.0 6.24 5.52 6.0 58N
Incl 93.8 94.5 36.20 30.00 0.7 58N
103.3 108.4 3.70 3.70 5.1 58N
DLD-15-148 39.7 43.5 1.70 1.70 3.8 75
Section 595630E 82.6 83.2 0.73 0.73 0.6 58N
DLD-15-149 483.0 483.5 54.90 30.00 0.5 75
Section 595580E 623.3 647.0 3.88 3.27 23.7 58N
Incl 633.0 644.0 7.55 6.23 11.0 58N
Incl 633.0 634.0 40.00 30.00 1.0 58N
Incl 643.5 644.0 39.10 30.00 0.5 58N
DLD-15-150 44.0 46.0 1.28 1.28 2.0 75
Section 595430E 110.0 114.0 2.91 2.91 4.0 58N
117.6 120.0 3.32 3.32 2.4 58N
DLD-15-151 294.0 295.3 0.01 0.01 1.3 75
Section 595480E 390.0 396.0 2.51 2.51 6.0 58N
419.0 445.0 3.71 3.48 26.0 58N
Incl 421.0 428.0 9.63 8.76 7.0 58N
Incl 421.0 422.0 36.10 30.00 1.0 58N
451.0 459.0 1.26 1.26 8.0 58N
487.0 499.0 1.39 1.39 12.0 58N
513.0 519.0 2.02 2.02 6.0 58N
DLD-15-152A 153.0 157.2 2.98 2.98 4.2 75
Section 595430E 162.2 164.0 4.68 4.68 1.8 75
234.7 238.7 4.14 4.14 4.0 58N
245.0 251.0 2.10 2.10 6.0 58N
DLD-15-153 32.6 33.5 3.42 3.42 0.9 58N
Section 595630E
DLD-15-154 64.5 67.5 2.31 2.31 3.0 58N
Section 595380E
DLD-15-155 50.0 51.0 0.41 0.41 1.0 75
Section 595380E 86.0 93.0 1.33 1.33 7.0 58N
DLD-15-156 382.0 384.6 1.75 1.75 2.6 75
Section 595530E 519.0 525.0 4.20 4.20 6.0 58N
555.0 563.0 1.18 1.18 8.0 58N
Incl 559.0 562.0 2.26 2.26 3.0 58N
DLD-15-157 576.5 582.0 2.37 2.37 5.5 75
Section 595580E 737.5 751.0 14.72 5.16 13.5 58N
Incl 740.0 746.0 32.05 10.55 6.0 58N
Incl 744.5 745.5 159.00 30.00 1.0 58N
756.0 760.0 3.22 3.22 4.0 58N
793.0 802.5 1.82 1.82 9.5 58N
814.0 818.0 2.29 2.29 4.0 58N
DLD-15-158 91.0 92.0 0.08 0.08 1.0 75
Section 595380E 158.0 163.6 1.71 1.71 5.6 58N
DLD-15-159 155.6 156.6 0.01 0.01 1.0 75
Section 595380E 224.0 237.0 1.52 1.52 13.0 58N
244.0 253.8 3.85 3.80 9.8 58N
Incl 247.0 248.0 30.50 30.00 1.0 58N
DLD-15-160 195.4 196.6 0.10 0.10 1.2 75
Section 595380E 266.0 271.0 1.68 1.68 5.0 58N
DLD-15-161A 344.0 345.0 0.01 0.01 1.0 75
Section 595530E 469.0 492.0 2.45 2.45 23.0 58N
Incl 469.0 474.0 5.80 5.80 5.0 58N
Incl 482.0 486.0 4.49 4.49 4.0 58N
501.0 523.5 3.37 3.19 22.5 58N
Incl 509.0 523.5 4.98 4.71 14.5 58N
Incl 514.0 515.0 34.00 30.00 1.0 58N
DLD-15-162 133.1 138.0 2.66 2.66 4.9 75
Section 595630E Incl 134.1 137.0 3.76 3.76 2.9 75
180.0 183.0 2.15 2.15 3.0 58N
244.0 248.2 17.40 11.66 4.2
Incl 246.7 247.5 60.10 30.00 0.8
DLD-15-163 313.6 314.7 0.97 0.97 1.1 75
Section 595630E 433.3 436.5 8.58 5.31 3.2 58N
Incl 433.3 433.8 50.90 30.00 0.5 58N
DLD-15-164 235.4 236.0 20.30 20.30 0.6 58
Section 595530E 356.0 360.0 1.23 1.23 4.0 75
494.0 512.0 3.12 3.12 18.0 58N
519.0 525.0 2.24 2.24 6.0 58N
534.0 548.0 4.62 4.27 14.0 58N
Incl 544.0 545.0 34.90 30.00 1.0 58N
DLD-15-165A 321.5 322.6 4.06 4.06 1.1 75
Section 595680E 440.7 452.0 9.68 4.50 11.3 58N
Incl 445.5 449.7 24.92 10.98 4.2 58N
Incl 445.5 446.5 74.20 30.00 1.0 58N
Incl 449.2 449.7 58.70 30.00 0.5 58N
457.9 459.0 14.70 14.70 1.1 58N
DLD-15-166 437.2 438.0 1.84 1.84 0.8 75
Section 595630E 574.3 589.2 9.45 9.25 14.9 58N
Incl 575.0 582.0 17.20 16.78 7.0 58N
Incl 579.0 581.0 31.45 30.00 2.0 58N
DLD-15-167 434.5 435.5 0.18 0.18 1.0 75
Section 595680E 579.0 587.5 5.33 4.87 8.5 58N
Incl 587.0 587.5 37.80 30.00 0.5 58N
DLD-15-168 507.3 514.0 0.20 0.20 6.7 75
Section 595580E 671.0 677.0 4.36 4.36 6.0 58N
Incl 671.0 674.0 8.14 8.14 3.0 58N
740.0 756.0 1.18 1.18 16.0 58N
Note: Reported average gold grade is over core length widths. True width is estimated to be 65 to 75% of the drilled length. Reported intervals are also shown with an assay cap of 30 g/t. Some of the assays reported herein are still subject to re-assay using a gravimetric finish.
Re-stated Significant Assay Results from 2013, 2014, and 2015 Winter Drilling Programs
Zone 58N, Lower Detour Area
Hole Number From To Au g/t Au g/t Cut Length m Domain
DLD-13-029 184.2 184.9 1.38 1.38 0.7 75
Section 595630E 191.0 193.1 6.19 6.19 2.1 75
260.0 264.0 0.36 0.36 4.0 58N
DLD-13-075 222.6 231.8 8.72 5.58 9.2 75
Section 595630E Incl 225.0 226.0 58.85 30.00 1.0 75
310.0 311.0 0.57 0.57 1.0 58N
DLD-14-087 289.0 289.5 4.81 4.81 0.5 75
Section 595680E 301.4 304.0 3.63 3.63 2.6 75
382.9 384.0 6.59 6.59 1.1 58N
DLD-14-088 85.0 94.0 8.54 3.29 9.0 75
Section 595580E Incl 89.0 89.5 124.50 30.00 0.5 75
144.0 145.0 3.67 3.67 1.0 58N
DLD-14-089 231.6 236.5 1.72 1.72 4.9 75
Section 595680E 339.9 342.0 0.78 0.78 2.1 58N
DLD-14-090 231.0 235.0 4.10 4.10 4.0 75
Section 595580E 339.0 340.0 5.47 5.47 1.0 58N
DLD-14-091 229.2 235.0 4.06 4.06 5.8 75
Section 595730E 339.6 340.6 13.25 13.25 1.0 58N
DLD-14-093 254.7 255.5 0.97 0.97 0.8 75
Section 595780E 339.0 345.0 4.50 4.50 6.0 58N
DLD-14-097 230.0 232.0 5.05 5.05 2.0 75
Section 595230E 270.0 285.0 0.79 0.79 15.0 58N
289.0 295.0 1.54 1.54 6.0 58N
DLD-14-100 141.8 146.9 7.41 7.41 5.1 75
Section 595580E Incl 141.8 142.3 30.00 30.00 0.5 75
222.0 227.0 1.30 1.30 5.0 58N
322.0 323.0 5.81 5.81 1.0 58N
DLD-14-103 133.0 135.7 33.48 11.39 2.7 58
Section 595530E Incl 133.0 134.0 88.66 30.00 1.0 58
218.1 223.0 0.96 0.96 4.9 75
318.6 352.9 11.20 2.93 34.3 58N
Incl 320.5 321.0 40.10 30.00 0.5 58N
Incl 336.1 336.9 378.00 30.00 0.8 58N
376.0 387.0 3.28 3.28 11.0 58N
DLD-14-105 288.5 289.5 2.96 2.96 1.0 75
Section 595580E 377.0 391.0 16.30 13.49 14.0 58N
Incl 378.0 381.0 37.67 24.60 3.0 58N
398.0 401.2 18.12 15.62 3.2 58N
Incl 400.5 401.2 41.40 30.00 0.7 58N
DLD-14-108 151.0 154.1 2.93 2.93 3.1 75
Section 595680E 279.0 279.5 0.38 0.38 0.5 58N
DLD-14-109 380.5 381.6 0.10 0.10 1.1 75
Section 595730E 488.0 490.0 0.61 0.61 2.0 58N
DLD-14-110 134.0 135.0 1.39 1.39 1.0 75
Section 595530E 174.0 181.0 2.38 2.38 7.0 58N
237.0 243.0 55.77 9.49 6.0 58N
Incl 240.0 241.0 308.00 30.00 1.0 58N
322.0 325.0 11.30 10.65 3.0 58N
Incl 324.0 325.0 31.90 30.00 1.0 58N
DLD-14-111 135.2 142.5 4.31 4.31 7.3 75
Section 595480E 162.6 163.1 16.60 16.60 0.5 58N
198.0 201.0 3.25 3.25 3.0 58N
216.0 226.0 1.06 1.06 10.0 58N
293.7 296.0 5.14 5.14 2.3 58N
309.0 316.0 8.93 5.51 7.0 58N
Incl 313.0 314.0 53.90 30.00 1.0 58N
DLD-14-112 216.0 217.0 0.47 0.47 1.0 75
Section 595480E 253.0 260.0 17.34 9.97 7.0 58N
Incl 256.0 258.0 55.75 30.00 2.0 58N
309.0 312.0 24.60 14.01 3.0 58N
Incl 310.0 311.0 61.70 30.00 1.0 58N
320.0 330.0 3.47 3.47 10.0 58N
351.0 351.5 65.67 30.00 0.5 58N
DLD-14-113 94.0 96.3 7.07 7.07 2.3 75
Section 595630E 132.0 133.0 0.03 0.03 1.0 58N
DLD-14-114 162.0 163.0 1.38 1.38 1.0 75
Section 595730E 289.0 291.0 15.04 15.04 2.0 58N
DLD-14-115 60.0 60.5 1.62 1.62 0.5 75
Section 595530E 86.0 97.0 1.64 1.64 11.0 58N
106.0 114.0 2.48 2.48 8.0 58N
118.0 123.1 2.76 2.76 5.1 58N
154.5 155.0 165.02 30.00 0.5 58N
185.0 186.0 21.48 21.48 1.0 58N
DLD-14-116 55.5 57.5 15.02 8.33 2.0 75
Section 595480E 103.0 112.0 5.17 5.17 9.0 58N
118.0 125.0 22.17 7.14 7.0 58N
Incl 119.0 120.0 135.20 30.00 1.0 58N
151.0 160.0 2.40 2.25 9.0 58N
Incl 156.0 156.5 32.59 30.00 0.5 58N
251.7 258.0 3.38 3.38 6.3 58N
273.3 277.6 4.87 4.03 4.3 58N
Incl 276.3 276.8 37.21 30.00 0.5 58N
329.4 331.0 14.18 14.18 1.6 58N
DLD-14-118 322.4 323.0 0.15 0.15 0.6 75
Section 595430E 435.0 440.0 0.81 0.81 5.0 58N
DLD-14-119 77.4 85.5 2.10 2.10 8.1 75
Section 595330E 140.0 141.9 1.59 1.59 1.9 58N
DLD-14-120 97.3 99.0 2.80 2.80 1.7 75
Section 595430E 169.4 179.0 6.49 5.35 9.6 58N
Incl 172.5 173.0 51.80 30.00 0.5 58N
DLD-14-121 198.4 199.0 0.02 0.02 0.6 75
Section 595330E 251.0 266.0 0.97 0.97 15.0 58N
285.0 293.3 1.52 1.52 8.3 58N
DLD-14-122 50.0 58.2 1.68 1.68 8.2 58N
Section 595430E 219.4 221.0 6.22 6.22 1.6
DLD-14-123 289.5 290.5 0.99 0.99 1.0 75
Section 595330E 366.9 372.9 3.41 3.41 6.0 58N
DLD-15-127 361.2 362.0 0.03 0.03 0.8 75
Section 595580E 504.0 520.7 2.93 2.93 16.7 58N
Incl 515.0 520.7 6.47 6.47 5.7 58N
DLD-15-128 412.3 413.5 0.16 0.16 1.2 75
Section 595480E 514.0 515.8 6.48 6.48 1.8 58N
524.0 530.0 1.64 1.64 6.0 58N
569.0 576.0 16.08 12.20 7.0 58N
Incl 572.5 573.0 84.30 30.00 0.5 58N
DLD-15-129 407.3 408.4 0.09 0.09 1.1 75
Section 595580E 521.0 522.6 6.78 6.78 1.6 58N
536.0 538.7 4.28 4.28 2.7 58N
562.0 567.4 3.49 3.49 5.4 58N
DLD-15-130A 435.5 436.3 0.17 0.17 0.8 75
Section 595430E 543.6 563.0 2.18 2.18 19.4 58N
Incl 547.0 555.0 3.27 3.27 8.0 58N
DLD-15-131 315.0 323.5 18.45 4.68 8.5 58
Section 595580E Incl 315.0 316.0 147.00 30.00 1.0 58
410.0 411.0 0.04 0.04 1.0 75
520.0 527.0 6.83 4.99 7.0 58N
Incl 521.1 522.0 44.30 30.00 0.9 58N
531.0 541.0 6.96 4.68 10.0 58N
Incl 531.0 532.0 52.80 30.00 1.0 58N
560.8 570.4 5.32 5.19 9.6 58N
Incl 569.0 569.5 32.60 30.00 0.5 58N
DLD-15-132 377.5 382.0 0.86 0.86 4.5 75
Section 595680E 505.5 511.6 10.18 7.07 6.1 58N
Incl 511.0 511.6 61.60 30.00 0.6 58N
528.5 530.1 4.62 4.62 1.6 58N
541.5 543.0 25.93 20.40 1.5 58N
Incl 541.5 542.5 38.30 30.00 1.0 58N
DLD-15-133 424.0 431.0 2.00 2.00 7.0 58
Section 595380E 455.0 463.0 1.34 1.34 8.0 75
563.0 567.1 0.64 0.64 4.1 58N
DLD-15-134 589.7 590.5 0.03 0.03 0.8 75
Section 595530E 727.5 729.0 15.60 15.60 1.5 58N
745.0 746.0 15.40 15.40 1.0 58N
Note: Reported average gold grade is over core length widths. True width is estimated to be 65 to 75% of the drilled length. Reported intervals are also shown with an assay cap of 30 g/t.

Contact Information

  • Detour Gold Corporation
    Paul Martin
    President and CEO
    (416) 304.0800

    Detour Gold Corporation
    Laurie Gaborit
    Director Investor Relations
    (416) 304.0581