BOULDER, CO--(Marketwire - May 1, 2012) - Dynamic Materials Corporation (DMC) (
Selected Highlights:
- Revenue increases 10% to $50.2 million versus year-ago first quarter, exceeding management forecasts
- Gross margin improves to 29% from 23% in Q1 last year, also surpassing forecasts
- Net income increases 224% to $2.4 million, or $0.18 per share, versus 2011 Q1
- Backlog at Explosive Metalworking segment climbs to $57 million, up 28% from most recent quarter
Dynamic Materials Corporation (DMC) (
First quarter sales were $50.2 million, up 10% from $45.6 million in last year's first quarter and down 7% from fourth quarter 2011 sales of $54.3 million. Sales exceeded management forecasts, which anticipated results would be flat to up 3% versus last year's first quarter. Gross margin improved to 29% from 23% in the year-ago first quarter and 27% in the 2011 fourth quarter. Management forecasted first quarter gross margin would be in a range of 26% to 27%.
Operating income was $4.1 million, up 177% from $1.5 million in last year's first quarter and down 20% from $5.2 million in the fourth quarter. Net income was $2.4 million, or $0.18 per diluted share, up 224% from net income of $750,000, or $0.06 per diluted share, in the year-ago first quarter and down from net income of $3.6 million, or $0.27 per diluted share, in the fourth quarter.
Adjusted EBITDA was $8.1 million, up 59% from $5.1 in last year's first quarter, and down 8% from $8.7 million in last year's fourth quarter. Adjusted EBITDA is a non-GAAP (generally accepted accounting principles) financial measure used by management to measure operating performance. See additional information about adjusted EBITDA at the end of this news release, as well as a reconciliation of adjusted EBITDA to GAAP measures.
Explosive Metalworking
DMC's Explosive Metalworking segment reported sales of $27.5 million, up 6% from sales of $26.1 million in the first quarter last year. Operating income increased 164% to $4.1 million from $1.6 million in the 2011 first quarter. Adjusted EBITDA was $5.5 million, an improvement of 83% from $3.0 million in the comparable year-ago quarter. The segment closed the quarter with an order backlog of $57 million, up 28% from $45 million at the end of fiscal 2011.
Oilfield Products
Sales at DMC's Oilfield Products segment increased 23% to $21.0 million from $17.1 million in the prior year's first quarter. Operating income was $2.0 million, up 121% from $924,000 in last year's first quarter, while adjusted EBITDA was up 64% to $3.5 million from $2.1 million in the 2011 first quarter.
AMK Welding
DMC's AMK Welding segment reported first quarter sales of $1.7 million, down 30% from $2.4 million in the prior year's first quarter. The top-line decline is related to AMK's anticipated wind down of work on a customer's ground power program. AMK is now focused on expanding its customer base and entering new end markets. The segment reported an operating loss of $87,000 compared with operating income of $468,000 in the same quarter of 2011. Adjusted EBITDA was $37,000 versus $590,000 in the prior year's first quarter.
Management Commentary
"First quarter sales exceeded our forecasts thanks to stronger-than-expected U.S. sales of our oilfield products and favorable timing of certain shipments out of our U.S. Explosive Metalworking facility," said Yvon Cariou, president and CEO. "Gross margin also exceeded our expectations, reflecting the positive impact of strong sales at our higher-margin Oilfield Products segment, as well as the improved pricing environment within certain of our explosion welding end markets.
"We are especially encouraged by the improvement in clad-plate booking volume, which fueled a 28% sequential increase in our Explosive Metalworking order backlog. This booking momentum continued after the close of the quarter, and included a $7.3 million chemical industry order that was booked into backlog during the first week of April."
Cariou said the chemical, petrochemical, oil and gas, and aluminum smelting industries continue to be DMC's most active explosion welding end markets. "The hot list of global order prospects we are tracking remains healthy and includes some large industrial infrastructure projects. Our worldwide sales teams are actively and aggressively pursuing these opportunities."
Cariou added, "The continued growth of our Oilfield Products business reflects the positive impact of our acquisition program and organic growth initiatives. It appears that well completion and re-completion efforts by the global exploration and production industry will be very active for the foreseeable future, and we believe our Oilfield Products business is ideally positioned to capitalize on this market opportunity."
Guidance
Rick Santa, senior vice president and chief financial officer, re-affirmed management's 2012 sales growth forecast of 7% to 10% versus the $208.9 reported in fiscal 2011. However, he elevated the Company's full-year gross margin forecast to 29% to 30% versus the prior forecast range of 28% to 29%. Based on projected full-year 2012 pre-tax income, the Company's anticipated blended effective tax rate for fiscal 2012 has been increased to a range of 28% to 32% from a prior range of 27% to 30%.
Santa said consolidated sales during the second fiscal quarter are expected to be down 10% to 14% versus the second quarter last year. The anticipated decline relates principally to the expected timing of shipments out of the Company's Explosive Metalworking order backlog. Gross margin is expected to remain flat at approximately 29% versus the second quarter last year.
"Given the growth of our explosion welding backlog and the sustained strength of our oilfield products business, we obviously believe sales during the second half of fiscal 2012 will be much stronger than the first half, and this is reflected in our full year sales forecast," Santa said.
Conference call information
Management will hold a conference call to discuss these results today at 5:00 p.m. Eastern (3:00 p.m. Mountain). Investors are invited to listen to the call live via the Internet at www.dynamicmaterials.com, or by dialing into the teleconference at 877-407-8031 (201-689-8031 for international callers). No passcode is necessary. Participants should access the website at least 15 minutes early to register and download any necessary audio software. A replay of the webcast will be available for 90 days and a telephonic replay will be available through May 8, 2012, by calling 877-660-6853 (201-612-7415 for international callers) and entering the Account Number 286 and the passcode 392910.
Use of Non-GAAP Financial Measures
Non-GAAP results are presented only as a supplement to the financial statements based on U.S. generally accepted accounting principles (GAAP). The non-GAAP financial information is provided to enhance the reader's understanding of DMC's financial performance, but no non-GAAP measure should be considered in isolation or as a substitute for financial measures calculated in accordance with GAAP. Reconciliations of the most directly comparable GAAP measures to non-GAAP measures are provided within the schedules attached to this release.
EBITDA is defined as net income plus or minus net interest plus taxes, depreciation and amortization. Adjusted EBITDA excludes from EBITDA stock-based compensation and, when appropriate, other items that management does not utilize in assessing DMC's operating performance (as further described in the attached financial schedules). None of these non-GAAP financial measures are recognized terms under GAAP and do not purport to be an alternative to net income as an indicator of operating performance or any other GAAP measure.
Management uses these non-GAAP measures in its operational and financial decision-making, believing that it is useful to eliminate certain items in order to focus on what it deems to be a more reliable indicator of ongoing operating performance and the company's ability to generate cash flow from operations. As a result, internal management reports used during monthly operating reviews feature the adjusted EBITDA. Management also believes that investors may find non-GAAP financial measures useful for the same reasons, although investors are cautioned that non-GAAP financial measures are not a substitute for GAAP disclosures. EBITDA and adjusted EBITDA are also used by research analysts, investment bankers and lenders to assess operating performance. For example, a measure similar to EBITDA is required by the lenders under DMC's credit facility.
Because not all companies use identical calculations, DMC's presentation of non-GAAP financial measures may not be comparable to other similarly titled measures of other companies. However, these measures can still be useful in evaluating the company's performance against its peer companies because management believes the measures provide users with valuable insight into key components of GAAP financial disclosures. For example, a company with greater GAAP net income may not be as appealing to investors if its net income is more heavily comprised of gains on asset sales. Likewise, eliminating the effects of interest income and expense moderates the impact of a company's capital structure on its performance.
All of the items included in the reconciliation from net income to EBITDA and adjusted EBITDA are either (i) non-cash items (e.g., depreciation, amortization of purchased intangibles and stock-based compensation) or (ii) items that management does not consider to be useful in assessing DMC's operating performance (e.g., income taxes and gain on sale of assets). In the case of the non-cash items, management believes that investors can better assess the company's operating performance if the measures are presented without such items because, unlike cash expenses, these adjustments do not affect DMC's ability to generate free cash flow or invest in its business. For example, by adjusting for depreciation and amortization in computing EBITDA, users can compare operating performance without regard to different accounting determinations such as useful life. In the case of the other items, management believes that investors can better assess operating performance if the measures are presented without these items because their financial impact does not reflect ongoing operating performance.
About Dynamic Materials Corporation
Based in Boulder, Colorado, Dynamic Materials Corporation serves a global network of industrial customers through two core business segments -- Explosive Metalworking and Oilfield Products -- as well as a specialized industrial service provider, AMK Welding. The Explosive Metalworking segment is the world's largest manufacturer of explosion-welded clad metal plates, which are used to fabricate capital equipment utilized within various process industries and other industrial sectors. Oilfield Products is an international manufacturer and marketer of advanced explosive components and systems used to perforate oil and gas wells. AMK Welding utilizes various specialized technologies to weld components for use in power-generation turbines, and commercial and military jet engines. For more information, visit the Company's websites at
http://www.dynamicmaterials.com and http://www.dynaenergetics.de.
Safe Harbor Language
Except for the historical information contained herein, this news release contains forward-looking statements, including our guidance for second quarter and full-year 2012 sales, margins and tax rates, as well as expectations about customer demand, business conditions and growth opportunities, all of which involve risks and uncertainties. These risks and uncertainties include, but are not limited to, the following: our ability to realize sales from our backlog; our ability to obtain new contracts at attractive prices; the size and timing of customer orders and shipments; fluctuations in customer demand; our ability to successfully source and execute upon greenfield growth as well as acquisition opportunities; fluctuations in foreign currencies, changes to customer orders; the cyclicality of our business; competitive factors; the timely completion of contracts; the timing and size of expenditures; the timing and price of metal and other raw material; the adequacy of local labor supplies at our facilities; current or future limits on manufacturing capacity at our various operations; the availability and cost of funds; and general economic conditions, both domestic and foreign, impacting our business and the business of the end-market users we serve; as well as the other risks detailed from time to time in the Company's SEC reports, including the annual report on Form 10-K for the year ended December 31, 2011.
| DYNAMIC MATERIALS CORPORATION & SUBSIDIARIES | ||||||||||
| CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS | ||||||||||
| FOR THE THREE MONTHS ENDED MARCH 31, 2012 AND 2011 | ||||||||||
| (Dollars in Thousands, Except Share and Per Share Data) | ||||||||||
| (unaudited) | ||||||||||
| Three months ended | ||||||||||
| March 31, | ||||||||||
| 2012 | 2011 | |||||||||
| NET SALES | $ | 50,212 | $ | 45,574 | ||||||
| COST OF PRODUCTS SOLD | 35,835 | 35,272 | ||||||||
| Gross profit | 14,377 | 10,302 | ||||||||
| COSTS AND EXPENSES: | ||||||||||
| General and administrative expenses | 4,505 | 3,675 | ||||||||
| Selling and distribution expenses | 4,190 | 3,726 | ||||||||
| Amortization of purchased intangible assets | 1,544 | 1,405 | ||||||||
| Total costs and expenses | 10,239 | 8,806 | ||||||||
| INCOME FROM OPERATIONS | 4,138 | 1,496 | ||||||||
| OTHER INCOME (EXPENSE): | ||||||||||
| Other income (expense), net | (200 | ) | (203 | ) | ||||||
| Interest expense | (211 | ) | (410 | ) | ||||||
| Interest income | 6 | 3 | ||||||||
| INCOME BEFORE INCOME TAXES | 3,733 | 886 | ||||||||
| INCOME TAX PROVISION | 1,342 | 148 | ||||||||
| NET INCOME | 2,391 | 738 | ||||||||
| Less: Net loss attributable to non-controlling interest | (37 | ) | (12 | ) | ||||||
| NET INCOME ATTRIBUTABLE TO DYNAMIC MATERIALS CORPORATION | $ | 2,428 | $ | 750 | ||||||
| NET INCOME PER SHARE: | ||||||||||
| Basic | $ | 0.18 | $ | 0.06 | ||||||
| Diluted | $ | 0.18 | $ | 0.06 | ||||||
| WEIGHTED AVERAGE NUMBER OF SHARES OUTSTANDING: | ||||||||||
| Basic | 13,183,000 | 13,045,600 | ||||||||
| Diluted | 13,190,193 | 13,055,619 | ||||||||
| DIVIDENDS DECLARED PER COMMON SHARE | $ | 0.04 | $ | 0.04 | ||||||
| DYNAMIC MATERIALS CORPORATION & SUBSIDIARIES | ||||||||
| CONDENSED CONSOLIDATED BALANCE SHEETS | ||||||||
| (Dollars in Thousands) | ||||||||
| March 31, | December 31, | |||||||
| 2012 | 2011 | |||||||
| ASSETS | (unaudited) | |||||||
| Cash and cash equivalents | $ | 7,533 | $ | 5,276 | ||||
| Accounts receivable, net | 36,415 | 36,368 | ||||||
| Inventories | 46,646 | 43,218 | ||||||
| Other current assets | 6,263 | 6,327 | ||||||
| Total current assets | 96,857 | 91,189 | ||||||
| Property, plant and equipment, net | 45,493 | 41,402 | ||||||
| Goodwill, net | 38,399 | 37,507 | ||||||
| Purchased intangible assets, net | 47,168 | 42,054 | ||||||
| Other long-term assets | 2,120 | 1,274 | ||||||
| Total assets | $ | 230,037 | $ | 213,426 | ||||
| LIABILITIES AND STOCKHOLDERS' EQUITY | ||||||||
| Accounts payable | $ | 13,713 | $ | 14,753 | ||||
| Customer advances | 3,494 | 1,918 | ||||||
| Dividend payable | 539 | 535 | ||||||
| Accrued income taxes | 1,424 | 780 | ||||||
| Other current liabilities | 9,281 | 10,158 | ||||||
| Lines of credit | 1,315 | 13 | ||||||
| Current portion of long-term debt | 63 | 1,153 | ||||||
| Total current liabilities | 29,829 | 29,310 | ||||||
| Lines of credit | 35,240 | 26,462 | ||||||
| Long-term debt | 104 | 118 | ||||||
| Deferred tax liabilities | 10,889 | 10,185 | ||||||
| Other long-term liabilities | 1,263 | 1,308 | ||||||
| Stockholders' equity | 152,712 | 146,043 | ||||||
| Total liabilities and stockholders' equity | $ | 230,037 | $ | 213,426 | ||||
| DYNAMIC MATERIALS CORPORATION & SUBSIDIARIES | |||||||||||
| CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS | |||||||||||
| FOR THE THREE MONTHS ENDED MARCH 31, 2012 AND 2011 | |||||||||||
| (Dollars in Thousands) | |||||||||||
| (unaudited) | |||||||||||
| 2012 | 2011 | ||||||||||
| CASH FLOWS FROM OPERATING ACTIVITIES: | |||||||||||
| Net income | $ | 2,391 | $ | 738 | |||||||
| Adjustments to reconcile net income to net cash provided by operating activities - | |||||||||||
| Depreciation (including capital lease amortization) | 1,367 | 1,356 | |||||||||
| Amortization of purchased intangible assets | 1,544 | 1,405 | |||||||||
| Amortization of deferred debt issuance costs | 35 | 53 | |||||||||
| Stock-based compensation | 969 | 792 | |||||||||
| Deferred income tax benefit | (305 | ) | (586 | ) | |||||||
| Change in working capital, net | 732 | (2,441 | ) | ||||||||
| Net cash provided by operating activities | 6,733 | 1,317 | |||||||||
| CASH FLOWS FROM INVESTING ACTIVITIES: | |||||||||||
| Acquisition of property, plant and equipment | (2,633 | ) | (1,087 | ) | |||||||
| Acquisition of TRX Industries | (10,294 | ) | - | ||||||||
| Change in other non-current assets | 116 | 36 | |||||||||
| Net cash used in investing activities | (12,811 | ) | (1,051 | ) | |||||||
| CASH FLOWS FROM FINANCING ACTIVITIES: | |||||||||||
| Borrowings on lines of credit, net | 9,840 | 668 | |||||||||
| Payments on long-term debt | (1,127 | ) | (205 | ) | |||||||
| Payments on capital lease obligations | (24 | ) | (76 | ) | |||||||
| Payment of dividends | (535 | ) | (529 | ) | |||||||
| Contribution from non-controlling stockholder | - | 42 | |||||||||
| Net proceeds from issuance of common stock | - | 5 | |||||||||
| Tax impact of stock-based compensation | 19 | (128 | ) | ||||||||
| Net cash provided by (used in) financing activities | 8,173 | (223 | ) | ||||||||
| EFFECTS OF EXCHANGE RATES ON CASH | 162 | 145 | |||||||||
| NET INCREASE IN CASH AND CASH EQUIVALENTS | 2,257 | 188 | |||||||||
| CASH AND CASH EQUIVALENTS, beginning of the period | 5,276 | 4,572 | |||||||||
| CASH AND CASH EQUIVALENTS, end of the period | $ | 7,533 | $ | 4,760 | |||||||
| DYNAMIC MATERIALS CORPORATION & SUBSIDIARIES |
| RECONCILIATIONS OF NON-GAAP FINANCIAL MEASUREMENTS TO MOST |
| DIRECTLY COMPARABLE GAAP FINANCIAL MEASUREMENTS |
| (Dollars in thousands) |
| (unaudited) |
| Three months ended | ||||||||
| March 31, | ||||||||
| 2012 | 2011 | |||||||
| Explosive Metalworking | $ | 27,533 | $ | 26,074 | ||||
| Oilfield Products | 20,974 | 17,056 | ||||||
| AMK Welding | 1,705 | 2,444 | ||||||
| Net sales | $ | 50,212 | $ | 45,574 | ||||
| Explosive Metalworking | $ | 4,099 | $ | 1,554 | ||||
| Oilfield Products | 2,046 | 924 | ||||||
| AMK Welding | (87 | ) | 468 | |||||
| Unallocated expenses | (1,920 | ) | (1,450 | ) | ||||
| Income (loss) from operations | $ | 4,138 | $ | 1,496 | ||||
| For the three months ended March 31, 2012 | ||||||||||||||||||
| Explosive | Oilfield | AMK | Unallocated | |||||||||||||||
| Metalworking | Products | Welding | Expenses | Total | ||||||||||||||
| Income (loss) from operations | $ | 4,099 | $ | 2,046 | $ | (87 | ) | $ | (1,920 | ) | $ | 4,138 | ||||||
| Adjustments: | ||||||||||||||||||
| Net loss attributable to non-controlling interest | - | 37 | - | - | 37 | |||||||||||||
| Stock-based compensation | - | - | - | 969 | 969 | |||||||||||||
| Depreciation | 879 | 364 | 124 | 1,367 | ||||||||||||||
| Amortization of purchased intangibles | 523 | 1,021 | - | - | 1,544 | |||||||||||||
| Adjusted EBITDA | $ | 5,501 | $ | 3,468 | $ | 37 | $ | (951 | ) | $ | 8,055 | |||||||
| For the three months ended March 31, 2011 | ||||||||||||||||||
| Explosive | Oilfield | AMK | Unallocated | |||||||||||||||
| Metalworking | Products | Welding | Expenses | Total | ||||||||||||||
| Income from operations | $ | 1,554 | $ | 924 | $ | 468 | $ | (1,450 | ) | $ | 1,496 | |||||||
| Adjustments: | ||||||||||||||||||
| Net loss attributable to non-controlling interest | - | 12 | - | - | 12 | |||||||||||||
| Stock-based compensation | - | - | - | 792 | 792 | |||||||||||||
| Depreciation | 913 | 321 | 122 | - | 1,356 | |||||||||||||
| Amortization of purchased intangibles | 546 | 859 | - | - | 1,405 | |||||||||||||
| Adjusted EBITDA | $ | 3,013 | $ | 2,116 | $ | 590 | $ | (658 | ) | $ | 5,061 | |||||||
| DYNAMIC MATERIALS CORPORATION & SUBSIDIARIES | |||||||
| RECONCILIATIONS OF NON-GAAP FINANCIAL MEASUREMENTS TO MOST | |||||||
| DIRECTLY COMPARABLE GAAP FINANCIAL MEASUREMENTS | |||||||
| (Dollars in thousands) | |||||||
| (unaudited) | |||||||
| Three months ended | |||||||
| March 31, | |||||||
| 2012 | 2011 | ||||||
| Net income attributable to DMC | $ | 2,428 | $ | 750 | |||
| Interest expense | 211 | 410 | |||||
| Interest income | (6 | ) | (3 | ) | |||
| Provision for income taxes | 1,342 | 148 | |||||
| Depreciation | 1,367 | 1,356 | |||||
| Amortization of purchased intangible assets | 1,544 | 1,405 | |||||
| EBITDA | 6,886 | 4,066 | |||||
| Stock-based compensation | 969 | 792 | |||||
| Other (income) expense, net | 200 | 203 | |||||
| Adjusted EBITDA | $ | 8,055 | $ | 5,061 | |||
Contact Information:
CONTACT:
Pfeiffer High Investor Relations, Inc.
Geoff High
303-393-7044