Helio Resource Corp.
TSX VENTURE : HRC

Helio Resource Corp.

October 15, 2007 11:00 ET

Helio Resource Corp.: Drilling Intersects 32m @ 2.35g/t Au and 18m @ 2.69g/t Au at the SMP Gold Project, Tanzania

Confirming Three Main Mineralised Zones Along the Kenge Structure

VANCOUVER, BRITISH COLUMBIA--(Marketwire - Oct. 15, 2007) - Helio Resource Corp. (the "Company") (TSX VENTURE:HRC) is pleased to present a further update from the Company's ongoing drill programme at the Kenge target, within the SMP Gold Project in Tanzania.

Highlights from this current batch of drill results include:

- 32m at 2.35g/t gold from SZR098

- 18m at 2.7g/t gold from SZR111

- 14m at 1.1g/t gold from SZR099

- 8m at 1.88g/t gold from SZR095

- 8m at 1.48g/t gold from SZR103

A table of all drill results from this batch is presented below. All of the holes reported here were reverse circulation drill holes.

The new drilling results reported herein confirm the presence of continuous gold mineralization over the full known 2km-long strike length of the Kenge Target. These results show the presence of three main mineralized zones which have a combined strike length of 1,250m. Maps showing all drill intercepts to date and the location of the three zones at the Kenge target are posted on the Company's website at www.helioresource.com. The three main zones of mineralization have been named Kenge Main Zone, Kenge SE Zone and Kenge NW Zone. Individual long sections for each of the three main zones are also posted on the website.

KENGE MAIN ZONE

The Kenge Main Zone is the largest of the three main mineralized zones, with a strike length of over 750m and a true width of up to 30m. The zone has been drilled to a depth of 220m below surface, is open to depth, and appears to get thicker with depth. Drill intersects in the Main Zone include: 19.66m grading 1.9g/t Au in the extreme NW; 18.63m at 3.63g/t Au and 39.32m at 1.33g/t Au in the centre of the zone; and 21.95m grading 6.92g/t Au, 19.43m at 3.01g/t Au and 13.47m at 1.64g/t Au at the southeastern end of the zone. A long section is posted on the Company's website showing all drill intercepts from this zone to date.

KENGE SE ZONE

The Kenge SE zone is located near the intersection with the ENE-trending Saza Shear Zone. The zone is 150m long, up to 30m thick (estimated true thickness), with previously reported drill intercepts including 20.26m at 3.08g/t gold, 20.47m at 2.99g/t gold, 7.5m at 4.01g/t gold, and 39m at 0.54g/t gold (see long section posted on Company's website).

KENGE NW ZONE

The 350m long Kenge NW Zone is located immediately northwest of the old Razorback Mine, and is up to 15m wide. Grades range up to 18.6m at 2.69g/t gold (see the long section on the Company's website).



Table of Drill Results

---------------------------------------------------------------
Hole # From Width (m) Grade (g/t Au) Comments
---------------------------------------------------------------
SZR-095 18 8 1.88
---------------------------------------------------------------
SZR-096 18 12 0.88 (i)
---------------------------------------------------------------
SZR-097 90 8 0.59 (i)
---------------------------------------------------------------
SZR-098 20 12 0.80 (i)
---------------------------------------------------------------
and 40 32 2.35 (i)
---------------------------------------------------------------
SZR-099 10 14 1.10 (i)
---------------------------------------------------------------
SZR-100 20 6 0.88
---------------------------------------------------------------
SZR-101 22 8 1.09
---------------------------------------------------------------
SZR-102 36 2 2.30
---------------------------------------------------------------
SZR-103 22 8 1.48
---------------------------------------------------------------
SZR-104 0 2 1.37
---------------------------------------------------------------
SZR-105 16 2 0.21 No cut off
---------------------------------------------------------------
SZR-106 24 4 0.31 No cut off
---------------------------------------------------------------
SZR-107 54 2 2.73
---------------------------------------------------------------
SZR-108 30 4 0.41 No cut off
---------------------------------------------------------------
SZR-109 0 2 2.60
---------------------------------------------------------------
and 62 4 1.22
---------------------------------------------------------------
SZR-110 66 8 1.24
---------------------------------------------------------------
SZR-111 18 12 0.21 No cut off
---------------------------------------------------------------
and 52 18 2.69
---------------------------------------------------------------
SZR-112 66 12 0.84
---------------------------------------------------------------
SZR-113 52 2 1.00
---------------------------------------------------------------
SZR-114 NCV
---------------------------------------------------------------
SZR-115 12 4 0.36 No cut off
---------------------------------------------------------------
(i) SZR-096 to -099 were drilled from NE to SW due to access problems.
Hence, true width for these intercepts is thought to be approximately 50%
of the stated width. The remainder of the holes have intercepts which are
between 75% and 95% of true width.


A further 17 infill diamond drill holes have been completed on the Kenge target, and results are pending.

Chris MacKenzie, M.Sc., C.Geol., Helio's COO and a Qualified Person as designated by NI 43-101, supervises the sampling and quality assurance / quality control programmes at Saza, and has reviewed the contents of this news release. Drill holes were oriented at between -48 degrees and -55 degrees and drilled perpendicular towards the main structural trend. Composite 2m samples were riffle split and submitted to laboratory (with a duplicate split retained). QA/QC includes the use of blanks and standards (1 every 16 samples) and duplicates (1 every 25 samples). Samples were assayed at the SGS Laboratory in Mwanza, Tanzania by 50g gold fire assay. As well as the Company's internal QA/QC programme, SGS also applied their own internal QA/QC programme, consisting of insertion of standards and duplicates. Mineralised intercepts are reported as drilled widths, which range from 50% to 95% of true widths. Except when otherwise stated above, weighted average intercepts are calculated between the uppermost and lowermost samples within the main mineralised zone over a 0.5g/t cut-off.

Helio Resource Corp. is a dynamic, technically-driven mineral exploration company, focused on high-quality project generation in southern Africa. Helio is actively exploring 26 prospective gold, base-metal and diamond properties in Namibia, Botswana, Mozambique and Tanzania. The main focus for the Company is the development of the SMP gold project in Tanzania. As part of its strategic approach to project development, Helio has optioned 9 of its Namibian licences to Desert Minerals (UK) Ltd. Helio continues to pursue joint venture partners for its other projects in Namibia, Botswana and Mozambique and to assess new opportunities in southern Africa.

ON BEHALF OF THE BOARD OF DIRECTORS

Richard D. Williams, P.Geo, CEO

Christopher J. MacKenzie, C.Geol., COO

The TSX Venture Exchange has not reviewed and does not accept responsibility for the adequacy or accuracy of this release.

Contact Information