SOURCE: Intersil

March 02, 2006 16:10 ET

Intersil Showcases Analog Technology at IIC Conference in China

MILPITAS, CA -- (MARKET WIRE) -- March 2, 2006 -- Intersil Corporation (NASDAQ: ISIL), a world leader in the design and manufacture of high-performance analog solutions, will showcase its newest analog technology at the 11th Annual International IC-China (IIC) Conference & Exhibition, March 6-14. Intersil will display its complete family of high-performance analog solutions targeted for four high-growth markets: High-end Consumer, Communications, Computing and Industrial.

Venue and Dates:

March 6-7, 2006
Intersil Booth #1G01

March 10-11, 2006
Intersil Booth #8G19

March 13-14, 2006
Intersil Booth #C11

Intersil will demonstrate the ISL887 05, a microprocessor supervisor that is designed to monitor power supply and battery functions in microprocessor systems. It can help to lower system cost, reduce board space requirements and increase system reliability. The ISL880 11 is a device that offers both fixed and/or adjustable voltage monitoring that combines popular functions such as Power On reset control, Watchdog timer, supply voltage supervision, and manual reset assertion in a small 5-pin SOT23 package. For more information, visit,1477,ISL88705,0.html and,1477,ISL88011,0.html.

The ISL544 00 dual single-pole/double throw (SPDT) switch combines low distortion audio and accurate USB 2.0 full-speed data signal switching in one low-voltage device. When operated with a 2.5V to 3.6V single supply, the ISL54400 allows audio signal swings below-ground, enabling the use of a common USB and audio headphone connector in personal media players and other portable battery-powered devices. For more information, visit,1477,ISL54400,0.html.

Intersil's EL4543 is a high-bandwidth triple differential amplifier with integrated encoding of video sync signals. The inputs are suitable for handling high-speed video or other communications signals in either single-ended or differential form, and the common-mode input range extends all the way to the negative rail, enabling ground-referenced signaling in single-supply applications. For more information, visit,1477,EL4543,0.html.

The EL9111 is a triple-channel differential receiver and equalizer. It contains three high-speed differential receivers with five programmable poles. The outputs of these pole blocks are then summed into an output buffer. The equalization length is set with the voltage on a single pin. For more information, visit,1477,EL9111,0.html.

Intersil's EL9115 is a triple analog delay line that allows skew compensation between any three signals. This part is perfect for compensating for the skew introduced by a typical CAT-5 cable with differing electrical lengths on each pair. The EL9115 can be programmed in steps of 2ns to 62ns total delay on each channel. For more information, visit,1477,EL9115,0.html.

The X9420 integrates a single, digitally controlled potentiometer (XDCP) on a monolithic CMOS integrated microcircuit. The XDCP is implemented using 63 resistive elements in a series array. Between each element are tap points connected to the wiper terminal through switches. The XDCP can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a wide variety of applications including control, parameter adjustments, and signal processing. For more information, visit,1477,X9420,0.html.

The ISL591 10 is a single rail-to-rail 3-pole output reconstruction filter with a -3dB roll-off frequency of 8MHz and a slew rate of 40V/ìs, with input signal DC restoration accomplished with an internal sync tip clamp. Operating from single supplies ranging from +2.5V to +3.6V and sinking an ultra-low 2mA quiescent current, the ISL59110 is ideally suited for low-power, battery-operated applications. For more information, visit,1477,ISL59110,0.html.

Intersil's Featured Speakers at IIC:

Speaker: Intersil President and COO Lou DiNardo
Time: 11:48 -11:56 a.m.
Date:  March 6, 2006
Location: Room 3, 2F, South Tower, Shanghai Mart, at 2299 Yan'an Road West,
Topic: Analog Companies Doing Business in China

Speaker: Intersil Senior FAE Joseph Chen
Time: 2:00 p.m. - 2:50 p.m.
Date: March 6-7, 2006
Location: Shanghai Mart, South Tower, Room 4A (2nd Floor)
Topic: Powering FPGAs -- A Look at Power Solutions

Speaker:  Intersil Senior FAE Jack Ni
Time: 4:10 p.m. - 5:00 p.m.
Date: March 10-11, 2006
Location: Shenzhen Convention & Exhibition Center, Room 315 (3rd Floor)
Topic: Powering FPGAs -- A Look at Power Solutions

Speaker:  Intersil Senior FAE Joseph Chen
Time: 2:00 p.m. - 2:50 p.m.
Date: March 13-14, 2006
Location: China World Trade Center, Beijing, Room 9A (Arcade Level)
Topic: Powering FPGAs -- A Look at Power Solutions
Press Interviews at IIC

Intersil's analog experts will be available for press and analyst interviews throughout the conference. To schedule an interview before or during IIC, please contact Kelly Ang at 86 21 6335 1198 ext: 115 or at

About Intersil

Intersil Corporation (NASDAQ: ISIL) is a leader in the design and manufacture of high performance analog semiconductors. The Company's products address three of the industry's fastest growing markets: flat panel displays, handhelds and power management. Intersil products include power management devices for battery management, hot-swap and hot-plug controllers, linear regulators, supervisory ICs, switching DC/ DC regulators and power MOSFET drivers; optical storage laser diode drivers; DSL line drivers; video and high performance operational amplifiers; data converters; interface ICs; analog switches and multiplexers; crosspoint switches; voice-over-IP devices; and ICs for military, space and rad-hard applications. For more information about Intersil or to find out how to become a member of our winning team, visit the Company's web site and career page at

Contact Information

  • Media Contact
    Kim Fehrt
    Public Relations Manager
    Intersil Corporation
    (408) 546-3566
    Email Contact