Kenai Resources Ltd.

Kenai Resources Ltd.

October 31, 2011 09:25 ET

Kenai Resources Ltd.: Encouraging Drilling Results at Sao Chico Gold Project, Brazil

VANCOUVER, BRITISH COLUMBIA--(Marketwire - Oct. 31, 2011) - Kenai Resources Ltd. ("Kenai") (TSX VENTURE:KAI) is pleased to provide a further update on drilling at the Sao Chico gold project in north central Brazil, with the receipt of preliminary assay results from several but not all high interest vein intercepts in drill holes 11-SC-002, 11-SC-003, 11-SC-004, and 11-SC-005.

To date, six core holes have been completed, with the seventh currently drilling ahead at a down hole depth of some 71 meters. The program has a current total of 902 meters drilled in this first phase 3000 meter program. Drilling to date has demonstrated high grade gold mineralization over a strike length of 80 metres and to a down hole length of 188 metres, equal to a vertical depth of 154 metres. Mineralization is interpreted to occur as lenticular bodies of quartz and disseminated to massive sulphide hosted within wider altered granite zones. The drilling is within an area where there are 200 small shallow garimpeiro shafts over a surface area of 1,000 metres east-west by 600 metres north-south and also within a broader exploration licence area of over 1,400 Ha.

For NI 43-101 reporting purposes, all core samples are forwarded to ACME Laboratories in Itaituba, the city closest to Sao Chico, for preparation of dried, crushed and pulverized pulps which are then forwarded to ACME facilities in Santiago, Chile and Vancouver for fire assaying and broad spectrum multi-element ICP analysis. To provide initial results, pulverized pulps from certain identified high interest intercepts have been extracted at Itaituba for short-form unofficial assay determination at the nearby Serabi Mining plc Palito mine assay laboratory.

From the first 20 high interest samples submitted, results have been received for 15 samples. All samples submitted in this batch are detailed in the Appendix hereto. The assaying method used at Palito is described as gold-DIBK, with a copper/aqua regia finish. It is emphasized the assay results from the Palito laboratory are unofficial and preliminary in nature, but are considered by Kenai as indicative of results likely to be reported by ACME Laboratories in due course.

Highlights from the preliminary assay results are:

  • Hole 11-SC-002 1.86 meters at 19.4 grams per tonne ("g/t") gold from 38 meters down hole depth
  • Hole 11-SC-004 1.2 meters at 60.9 g/t gold from 49 meters downhole depth
  • Hole 11-SC-005 1.58 meters at 97.6 g/t gold from 142 meters downhole depth

For drill hole 11-SC-004, the average preliminary assay over the entire altered interval from 49.10 to 52.83 meters is 19.9 g/t gold, over 3.73 meters, for an estimated true width intercept of approximately 2.8 meters. Holes 4 and 5 intersect the same high grade vertical vein structure and define gold mineralization down dip over 100 meters. Holes 2 and 6 intersect the same high grade structure in a location some 60 meters to the west with a similar down dip vertical extent of some 100 meters. These intercepts so far demonstrate high grade gold mineralization over a strike length of 80 metres and to a down hole length of 188 metres, equal to a vertical depth of 154 metres. Mineralization is interpreted to occur as lenticular bodies of quartz and disseminated to massive sulphide hosted within wider altered granite zones.

The location of the drillholes and intercepts are shown in the linked figures.

To view the Figures associated with this release, please visit the following link:

Ongoing drilling is planned to explore the along-strike and down dip continuity of the mineralization observed to date, and also to explore the potential for other lenticular mineralized bodies hosted within the fault zone. As previously reported by Kenai, eevidence of the immediate potential at Sao Chico is demonstrated by more than 200 small garimpeiro shafts over a surface area of 1,000 metres east-west by 600 metres north-south. Drilling to date has focused on the area of known high grade mineralization observed in the existing shallow underground drive.

The Sao Chico drilling program commenced with one shift per day and has now been increased to two shifts per day. A second Minexplor rig is now operating at Sao Chico, with the overall 3,000 meter program anticipated to be completed during December.

About Sao Chico

The project is more completely described in Kenai's NI 43-101 Technical Report on the project, details of which were contained in Kenai's news release of January 20, 2011. It has since been filed on SEDAR and on Kenai's website at

Sao Chico is located within the Tapajos region in Brazil, the site of one of the biggest gold rushes in recent history. In the late 1970s and 1980s, approximately 500,000 garimpeiros rushed to the region to exploit extensive areas of newly discovered alluvial gold, producing approximately 20-30 million ounces of gold before the easily won alluvial gold deposits were largely depleted. Little modern exploration has been conducted over the region to date, with excellent potential to expand gold operations at Sao Chico.

As previously advised, ASX-listed Gold Anomaly Ltd via its wholly owned Brazilian subsidiary GOAB, until Kenai exercises its options to acquire 50% and then 75% equity in GOAB, holds the Sao Chico mineral rights to the Sao Chico project in consideration for loan funds provided by Kenai for activities to date at Sao Chico. The options expire at the end of September 2012.

About Kenai Resources

Kenai is a Canadian company focused on precious mineral project exploration and development, towards early significant gold production. In addition to the Sao Chico gold project in Brazil, Kenai is also involved in exploration of the wholly-owned Quartz Mountain and Hope Butte epithermal gold projects in south-eastern Oregon, both located in Malheur County, close to the Oregon border with Idaho. Kenai's current indicated and historical gold resources from the two Oregon projects are summarized as follows:

Project Tonnes Grade Ounces AuEq Status/Classification
Quartz Mountain 15,050,200 0.80 g/t Au 352,667 Indicated Resources NI 43-101 compliant
Hope Butte 5,000,000 0.91 g/t Au 146,300 Historical, not NI 43-101 compliant


  1. For Quartz Mountain, resources above a 0.34 g/t cutoff with silver converted to gold equivalent using a ratio of 49.5:1 silver to gold. Metallurgical recoveries were not considered. Indicated resources are as reported in an independent November 2006 NI 43-101 report, posted on SEDAR at that time.
  2. The Hope Butte resources are considered historic in nature, do not comply with current NI 43-101 standards, have not been verified by the Company and therefore should not be relied upon. It is uncertain if further exploration will result in the discovery of an economic mineral resource.

On behalf of the Board of Directors of Kenai Resources Ltd.

Greg Starr, President and CEO

Forward-Looking Statements: Statements in this release that are forward-looking statements are subject to various risks and uncertainties concerning the specific factors disclosed and elsewhere in the company's periodic filings with Canadian securities regulators. The economic viabilities of the resources estimates discussed in the release have not been established and may not be. Such information contained herein represents management's best judgment as of the date hereof based on information currently available. The Company does not assume the obligation to update any forward-looking statement.

The technical content of this news release has been reviewed by Kenai's Vice President Technical Services, Neil Cole, who has sufficient experience which is relevant to the style of mineralization under consideration and to the activity which is being undertaken and planned to qualify as a Qualified Person under NI 43-101.

Preliminary Assay Results - Samples of High Interest - Drillholes 002 to 006

Downhole Lengths - meters
Drillhole I.D. From To Intercept g/t Au Lithological Description
11-SC-002 29.6 31.1 1.5 <0.03 Altered granite
11-SC-002 36.25 38.25 2 0.22 Covering 36.25 m to 40.55 m, pervasive silicified
intrusive with chlorite, pyrite (<5mm, sub-euhedral) and minor epidote. Approx 90% quartz, 8% chlorite,
3% pyrite. Some relic plagioclase can be observed in
isolated zones. At 39.55 m and 39.75 m, two <30mm
vuggy quartz veins.





11-SC-003A 67.95 69.60 1.65 0.03 Altered granite
11-SC-003A 92.30 93.14 0.84 0.18 Quartz vein





From 49.11 m to 49.40 m, 53mm and 5mm quartz veins through granite. Veins are vuggy in appearance
and have heavily altered the granite to quartz, chlorite
and epidote. <3mm sub-euhedral pyrite is abundant in
the altered zone, and is concentrated at the lower extent of the alteration zone, forming up to 10mm sub-euhedral pyrite that defines almost the entire boundary.
From 49.40 m to 52.29 m, almost completely altered
granite, forming 40-50% quartz, 30% epidote, 10-15%
pyrite and 10-15% chlorite and galena. Original granite
texture can be seen in a few locations. Numerous
<10mm quartz veins run through with <10mm sub-euhedral pyrite concentrated around them. <3mm sub-euhedral pyrite is disseminated through the whole of the core (weaker where granite texture still present), as
is <2mm sub-euhedral galena.
11-SC-004 50.30 51.15 0.85 0.58 As above
11-SC-004 51.15 52.28 1.13 0.32 As above
11-SC-004 52.28 52.83 0.55 0.69 Quartz vein
11-SC-004 77.10 78.53 1.43 <0.03 Granite
11-SC-004 78.53 79.95 1.42 0.06 Altered granite, with some unaltered
11-SC-004 79.95 81.45 1.5 0.3 Altered granite
11-SC-004 95.50 97.00 1.5 <0.03 Altered granite
11-SC-004 97.00 98.05 1.05 <0.03 Granite





Granite with minor veinlets above, then from 142.24 m
to 142.64 m Flooded quartz vein zone with white/pale
vuggy quartz and <2mm dark grey quartz veinlets
running through. Dark grey quartz often has chlorite
formed around it as well as <2mm sub-euhedral pyrite. <2mm sub-euhedral galena can also be seen on
occasion as too can minor sericite. From 142.64 m to
143.70 m, heavily altered granite forming a
quartz/chlorite/pyrite and galena zone. Quartz appears
vuggy with the original granite textures completely
replaced through the majority of the core. <20mm sub-euhedral pyrite is highly abundant through the core
forming variably between 40-60% of the mineralisation. <10mm sub-euhedral galena is also abundant, forming mostly around <2mm dark grey quartz veinlets. The galena forms up to 5-10% of the core.
11-SC-005 184.25 185.56 1.31 awaited Altered granite + quartz vein
11-SC-005 185.56 186.60 1.04 awaited Altered granite + quartz vein
11-SC-006 126.02 127.10 1.08 awaited Altered granite
11-SC-006 132.78 133.90 1.12 awaited Altered granite
11-SC-006 133.90 134.93 1.03 awaited Altered granite

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Contact Information