Matamec Explorations inc.
TSX VENTURE : MAT

Matamec Explorations inc.

January 27, 2011 11:44 ET

Matamec Intersects 1.45% TREO Over 21 Metres on its Kipawa HREO-Y-Zr Deposit

MONTREAL, QUEBEC--(Marketwire - Jan. 27, 2011) - Matamec Explorations Inc. ("Matamec") (TSX VENTURE:MAT) is pleased to announce that the first group of assay results has been received for the 2010-2011 diamond drilling program on the Kipawa HREE-Y-Zr deposit in western Quebec.

This 3,300 metres drill program started on December 1st 2010. Its main objective is the improvement of resource quality, moving the majority of inferred resources into the indicated category. This necessitates the completion of a 50m spacing drilling grid over most of the deposit, while portions of the western zone will be drilled at 25m centres to gain an even better understanding of the high-grade zone.

To date, 31 DDH have been completed on the campaign, representing 2,405 meters of drilling, and preliminary results have been received for the first 13 holes of the campaign (KM82 to KM94, see Figure 1: http://media3.marketwire.com/docs/Figure1_Matamec_ENG_0127.pdf). Mineralized intervals for the six best holes are presented below. All six holes are well mineralized with both Eudialyte and Mosandrite, and indeed this first batch of analysis includes the best hole drilled to date on the property (KM94, beating out the previous contender (KM61) by more than 25% in terms of grade multiplied by thickness).

Andre Gauthier, president of Matamec Explorations, comments that: "We were already expecting good results from our drilling in the western zone. What we got with those six holes, and with KM94 in particular, were great to exceptional results. These holes clearly cement the presence of a high-grade zone at the heart of the Kipawa deposit."

Table 1
Interim REE Zones Assay Results, 0.1% Y2O3 cut-off
2010-2011 Kipawa Drill Program
 
Drill Hole From
(m)
To
(m)
Width
(m)
ZrO2
(%)
LREO
(%)
IREO
(%)
HREO
(%)
Y2O3
(%)
TREO
(%)
% HREO
+Y
2O3/TREO
KM87 3.95 8.05 4.1 >1.011 0.623 0.062 0.113 0.243 1.042 34
KM87 13.4 24.05 10.65 >0.715 0.490 0.046 0.068 0.153 0.757 29
KM87 63 65.6 2.6 0.182 0.631 0.056 0.091 0.226 1.004 32
KM88 3.35 13.5 10.15 0.719 >0.600 0.053 0.077 0.177 >0.906 28
KM88 24.8 30.9 6.1 0.245 0.721 0.083 >0.123 0.268 >1.195 33
KM89 1.5 8.5 7 >0.935 0.576 0.057 0.090 0.212 0.935 32
KM89 16.55 26.6 10.05 >0.995 0.574 0.057 0.095 0.217 0.944 33
KM91 10.25 18.5 8.25 0.798 0.339 0.034 0.051 0.111 0.534 30
KM91 27.5 35.55 8.05 >0.754 >0.557 >0.052 >0.093 >0.205 >0.907 33
KM92 6.9 12.05 5.15 >1.197 0.391 0.050 0.083 0.198 0.722 39
KM92 22.95 28.6 5.65 0.456 0.915 0.114 >0.172 0.391 >1.591 35
KM94 3.8 9 5.2 >1.218 0.735 0.083 0.193 0.436 1.448 43
KM94 12.4 33.37 20.97 >0.745 0.924 0.081 0.127 0.314 1.446 30
KM94 56.25 59 2.75 >1.036 >0.150 0.022 >0.049 0.101 >0.322 47
* Light rare earths (LREO) = La2O3 to Nd2O3, Intermediate rare earths (IREO) =Sm2O3 to Gd2O3, Heavy rare earths (HREO) = Tb2O3 to Lu2O3.
*** TREO = LREO + IREO + HREO + Y2O3

The drilling results set out above are preliminary, as some of the REE and zirconium analyses exceeded the limits of the analytical methods (marked by a ">" in the table). Full results will be released when they become available.

Upon receipt of final 2010-2011 assay results, a new 43-101 resource estimate will be completed by SGS Geostat using the new data. Matamec's next drilling campaign on the Zeus property, set to begin in spring 2010, will aim to better define the extensions of the deposit.

QAQC procedures

Matamec maintains a quality control program conforming to the industry's best practices. The NQ core is split, with one half kept as a witness at our Val d'Or facilities. Samples are then submitted in batches of 25, each containing two known standards and one blank, to the ALS Chemex ("ALS") preparation facility in Val d'Or where the samples are reduced to pulps and couriered to ALS in Vancouver (B.C.) for analysis. The samples are dissolved using a lithium metaborate fusion before being analysed by ICP-MS methods on a 2 gram sample size, with overlimits handled either by ICP-MS on a dilute solution, in the case of rare earths, or by XRF, in the case of zirconium. The samples and core are managed in a secure location until delivered to ALS. ALS maintains ISO 17025 certification, the highest accreditation available for QA/QC.

The geological data in this press release was prepared by Aline Leclerc, geologist and Matamec's Vice-President Exploration, a Qualified Person as defined by NI 43-101.

About Matamec

Other than its focus on the development of the Kipawa deposit and exploration for other showings of rare earths-yttrium-zirconium-niobium-tantalum on its Zeus property, Matamec's exploration strategy is to discover gold deposits, base metals and platinum group, as well as rare metals.

For gold, the company explores in the prolific mining camp of Timmins, Ontario, of which the main target is the Matheson JV with Goldcorp Canada Ltd. and Goldcorp Inc.

In Quebec, the Company is exploring for lithium and tantalum on its Tansim property and for precious and base metals on its Sakami, Valmont and Vulcain properties. As well, it is exploring for gold together with Northern Superior Resources Inc. on the Lesperance/Wachigabau property.

"Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release."

Contact Information