SOURCE: QS Energy, Inc.

QS Energy, Inc. Logo

June 27, 2016 08:30 ET

QS Energy Releases AOT Technical Update of Value Engineered Industrial Equipment Designed to Optimize Performance of Crude Oil Pipelines

SANTA BARBARA, CA--(Marketwired - June 27, 2016) - QS Energy, Inc. (the "Company") (OTCQX: QSEP), a developer of integrated technology solutions for the energy industry, today released an AOT Technical Update documenting the functionality and operational benefits of its Applied Oil Technology crude oil pipeline optimization technology. Currently in commercialization phase and undergoing case study review with leading pipeline operators, AOT is designed to allow crude oil to flow at a higher volume by subjecting it to a high-voltage/low-amperage electrical field which decreases viscosity and reduces friction in pipelines.

"During discussions with shareholders and industry analysts we're often asked about the motivating factors which drive interest in AOT from producers and operators in Canada, South America, Europe and the Middle East," stated Greggory M. Bigger, QS Energy Chief Executive Officer and Chairman. "This document is meant to educate interested parties on how QS Energy operates and the many factors involved in reviewing the needs of our customers, determining the optimal configuration for our technology, and collaborating with executives and engineering professionals within our industry to ensure the efficient, safe and economical delivery of crude oil from oil field to market."

Based in California with supply chain partners in Casper, Wyoming, QS Energy has pioneered the use of electrical fields to improve the performance of crude oil pipelines and lower operating expenses (Opex) while favorably impacting tariff revenues at a time when the energy industry is seeking to mitigate margin compression and gain measurable efficiencies.

"From the development of the first AOT prototype, up to our latest value engineered system, our overriding goal has been to leverage our patent protected technology to provide quantifiable bottom line opportunities for our customers," Mr. Bigger added. "Extensive studies of the mechanical behavior of crude oil in pipelines have historically identified two primary factors capable of improving flow -- the lowering of the viscosity of the oil, and reducing friction within the line. AOT has demonstrated the ability to do both to an extent that pressure drop is reduced, flow volume is increased, and power consumption at pumping stations is lessened."

Technical Update: AOT (Applied Oil Technology) Crude Oil Viscosity/Friction Reduction System

Entirely designed, fabricated and tested in the United States, AOT is ISO/TS 9001-compliant and ASME-certified industrial hardware approved for use in hazardous location Class 1, Div. I. rated areas and designed to optimize the performance of crude oil pipeline infrastructures.

AOT is the energy industry's first crude oil pipeline flow improvement solution using an electrical charge to anisotropically cause a conformational change of the microscopic particles native to unrefined oil, which lowers the viscosity of the oil and improves flow. AOT has been rigorously tested by Temple University's Department of Science and Technology and the U.S. Department of Energy, and is being commercialized in collaboration with engineering teams at independent oil production and transportation entities interested in harnessing its proven efficacy to increase pipeline performance and flow.

Benefits:

  • Lowers viscosity of a wide spectrum of crude oils
  • Reduces friction within pipelines
  • Counters pressure drop, reducing the amount of energy used to power pump stations
  • Minimizes friction loss, or the loss of pressure along the walls of the pipe
  • Increases flow rate and volume of crude oil transported within MAOP (maximum allowable operating pressure) ratings
  • Positive impact on tariff revenue for pipeline operators (transporters)
  • Studies are currently underway to determine effectiveness in suppressing deposition of wax, reducing sludge and hydrocarbon buildup, and suppressing turbulence

The Importance of Friction Reduction in Pipelines

To achieve efficient movement of any fluid in a pipeline, the pressure maintained in the line and the viscosity of the fluid are important factors in ensuring optimal flow. Pressure must be used to move the fluid forward, and due to friction, this is impeded to varying degrees (fluid pressure drop). When pipeline flow and pressure reach a certain point, measured in Reynolds numbers, the flow can change from stable (laminar) to chaotic (turbulent), which introduces further inefficiencies in the forward movement of the fluid. By reducing the viscosity of crude oil, AOT also mitigates friction within the pipeline which helps improve pressure loss reduction and achieve higher flow volume.

The Physics Behind AOT

The development of AOT technology has its basis in research conducted by scientists, physicists and engineers in the field of electrorheological fluids and magnetorheological suspension. Working with our research and development partner Temple University, QS Energy is able to forecast AOT performance outcomes using mathematical calculations performed by Dr. Rongjia Tao, co-developer of AOT and Chairman of Temple University's Physics Department. Among the core calculations in play are those used to determine expected viscosity reduction of crude oil, anticipated pressure drop within the pipeline, and the estimated amount of AOT operating time necessary to treat all crude oil throughout the length of a pipeline.

The Importance of Viscosity Reduction in Pipelines

Since the construction of the first pipelines to move crude oil from the well to downstream destinations such as storage tanks and refineries, the industry has sought to improve flow by various means. The use of thinners (diluents), Drag Reduction Agents (DRAs), and heat have been introduced to supplement the pipeline pressure achieved with pumping stations. Fluid viscosity plays an important role in the function of any hydraulics system and is one of the main sources of internal fluid friction. Friction is responsible for major pressure loss, a factor that must be overcome by a strong pressure gradient created by a pump. By reducing viscosity of crude oil while in transit and contributing to the reduction of friction, AOT has shown an ability to counter pipeline pressure drop, thereby improving the efficiency of the system as a whole. The reduction of power required for flow also decreases demand on pump station motors, directly reducing the amount of carbon dioxide (CO2) emitted.

The Value of AOT in Today's Evolving Energy Sector

As the global oil and gas industry continues to recalibrate its operations in response to the current supply surplus, producers and transporters are investing in technologies that reduce cost and improve efficiencies. Since most pipelines are dependent on committed and uncommitted toll rates, AOT's efficacy in improving flow rates by one-and-a-half to three percent has the potential to greatly impact tariff revenues and profitability. When fully optimized, the AOT system may improve the efficiency of virtually any crude oil pipeline system, providing the opportunity for pipeline operators to reduce operating costs and drive more revenue based on applicable toll rates due to higher flow rates.

"A significant percentage of pipelines are operated at a constant pressure or power level, providing enormous opportunity for the viscosity reduction capabilities of AOT to increase pipeline capacity and flow volume and therefore boost revenues derived from tariff rates," Mr. Bigger commented. "Following several years of design refinements and the current commercialization phase, we believe AOT is uniquely positioned within the global energy industry as a cost-efficient, low maintenance solution capable of having a positive impact on the operations of oil producers and transporters during today's down cycle and well into the future. We are now ready to offer this technology as a complete turn-key, pressure drop reduction tool that can be customized to fit the needs of a variety crude oil pipeline companies."

For further information about QS Energy, Inc., visit www.QSEnergy.com, read our SEC filings at http://ir.stockpr.com/qsenergy/all-sec-filings and subscribe to Email Alerts at http://ir.stockpr.com/qsenergy/email-alerts to receive company news and shareholder updates.

Safe Harbor Statement:

Some of the statements in this release may constitute forward-looking statements under federal securities laws. Please visit the following link for our complete cautionary forward-looking statement: http://www.qsenergy.com/site-info/disclaimer

About AOT™ (Applied Oil Technology)

Developed in partnership with scientists at Temple University in Philadelphia, AOT (Applied Oil Technology) is the energy industry's first crude oil pipeline flow improvement solution using an electrical charge to coalesce microscopic particles native to unrefined oil, thereby reducing viscosity. Over the past four years AOT has been rigorously prepared for commercial use with the collaboration of over 30 engineering teams at 19 independent oil production and transportation entities interested in harnessing its proven efficacy to increase pipeline performance and flow, drive up committed and uncommitted toll rates for pipeline operators, and reduce pipeline operating costs. Although AOT originally attracted the attention of pipeline operators interested in improving their takeaway capacity during an historic surge in upstream output resulting from enhanced oil recovery techniques, the technology now represents the premiere solution for improving the profit margins of producers and transporters during today's economically challenging period of low spot prices and supply surplus.

About QS Energy, Inc.

QS Energy, Inc. (OTCQX: QSEP), provides the global energy industry with patent-protected industrial equipment designed to deliver measurable performance improvements to crude oil pipelines. Developed in partnership with leading crude oil production and transportation entities, QS Energy's high-value solutions address the enormous capacity inadequacies of domestic and overseas pipeline infrastructures that were designed and constructed prior to the current worldwide surge in oil production. In support of our clients' commitment to the responsible sourcing of energy and environmental stewardship, QS Energy combines scientific research with inventive problem solving to provide energy efficiency 'clean tech' solutions to bring new efficiencies and lower operational costs to the upstream, midstream and gathering sectors. More information is available at: www.QSEnergy.com

Image Available: http://www.marketwire.com/library/MwGo/2016/6/27/11G104343/Images/QS1-376c01a6f25f8362b1f96eb364780614.jpg
Image Available: http://www.marketwire.com/library/MwGo/2016/6/27/11G104343/Images/QS2-b22227d49400a0cd94acc53246f4b58f.jpg
Image Available: http://www.marketwire.com/library/MwGo/2016/6/27/11G104343/Images/QS3-f56f84a43e08b14dae83fab0b54be707.jpg
Image Available: http://www.marketwire.com/library/MwGo/2016/6/27/11G104343/Images/QS4-404f09b24bdfa37db5e020a8e72a4929.jpg
Image Available: http://www.marketwire.com/library/MwGo/2016/6/27/11G104343/Images/QS5-142fc5432349b04ba35aab2f6bc1098c.jpg
Image Available: http://www.marketwire.com/library/MwGo/2016/6/27/11G104343/Images/QS6-bd8e8d270cb4b05badebc06a4f133970.jpg
Image Available: http://www.marketwire.com/library/MwGo/2016/6/27/11G104343/Images/QS7-c5ab464c81f39f67bb0b73ac51ed86b5.jpg

Contact Information

Multimedia