SOURCE: Ramtron International Corporation

May 23, 2007 08:30 ET

Ramtron Launches New Fram-Enhanced™ Processor Companion Family With High-Speed Serial Interface

Integrated, Single-Chip Solution Replaces Discrete Components to Reduce Board Space and Cost in Processor-Based Systems

COLORADO SPRINGS, CO -- (MARKET WIRE) -- May 23, 2007 -- Ramtron International Corporation (NASDAQ: RMTR), a leading developer and supplier of nonvolatile ferroelectric random access memory (FRAM) and integrated semiconductor products, today introduced the FM33x product family -- a new line of FRAM-Enhanced™ Processor Companions with a high-speed serial peripheral interface (SPI). The FM33x family combines, in one small package, all the benefits of a nonvolatile RAM with a comprehensive set of highly integrated support and peripheral functions for processor-based designs.

Ramtron launches the 33x Processor Companion family with two products: the FM33256 and the FM3316, which are 3-volt devices with 256 kilobits and 16 kilobits of FRAM, respectively. This single-chip solution replaces discrete components and reduces cost and board space, supporting commonly-needed system functions in processor-based systems such as meters and automotive telematics applications.

"The FM33x family was enhanced to meet the design requirements of the most advanced metering and car navigation systems," explains Mike Alwais, vice president of Marketing at Ramtron. "Many of our metering and telematics customers have requested faster data collection capacity to support their need for higher data rates. This new integrated FRAM product family addresses their needs through a high-speed SPI bus that enables writes at maximum bus-speed."

About the FM33x

The FM33x family incorporates a nonvolatile FRAM memory with No Delay™ writes, virtually unlimited endurance and low power consumption. The devices also include a real-time clock/calendar/alarm (RTC), as well as processor companion features such as a programmable low-VDD reset, a programmable watchdog timer, a manual reset function, a nonvolatile event counter, a lockable serial number, and a general-purpose comparator that can be used for early warning power-fail interrupts (NMI). The devices operate from 2.7 to 3.6 volts over the entire industrial temperature range (-40 degrees C to +85 degrees C).

FM33x Features:

--  SPI Bus: Operates at up to 16 MHz, providing high-performance serial
    communication to the host processor.
--  Processor Supervisor: Provides two functions to the host processor:
    detection of power supply fault conditions, and a watchdog timer to escape
    software lockup conditions.
--  Early Power-Fail Interrupt: A power fail comparator creates an NMI,
    warning the processor before the VDD drops out of specification. This is
    ideal for saving critical data to the FRAM.
--  Serial Number: A writeable, 64-bit nonvolatile memory area that can be
    locked once the serial number is set.
--  RTC: A timekeeping device that can be battery- or capacitor-backed for
    permanently-powered operation.  The RTC offers a software calibration
    feature for high accuracy, and an alarm.
--  Event Counter: A 16-bit nonvolatile event counter with a programmable
    edge detector that can be used to log system intrusions (tamper events) and
    other events.
--  Backup Power: The RTC is intended to be permanently powered.  When the
    primary system power fails, the voltage on the VDD pin will drop.  When VDD
    is less than 2.5V, the RTC (and event counters) will switch to the backup
    power supply on VBAK.  The backup source can be either a battery or a
    capacitor.
--  Trickle Charger: Facilitates capacitor backup.  The VBAK pin can
    optionally provide a trickle charge current.  Data is nonvolatile so it
    won't be lost if the capacitor fails.
--  Memory: 16 or 256Kb of true nonvolatile RAM (not battery-backed).
    FRAM technology replaces SRAM and other nonvolatile memories since it
    reads/writes at bus speed with 10 year data retention and effectively
    unlimited read/write endurance.
    
About the Processor Companion

The Processor Companion is a highly integrated FRAM-Enhanced™ system management solution that supports virtually any processor-based design. By integrating a nonvolatile FRAM, individual system features are improved over discrete versions, creating a single-chip solution with superior bill of material cost and reduced board space.

Pricing and Availability

Samples of the FM33x are currently available in a 14-pin SOIC RoHS-compliant package. Pricing in 10K quantities starts at $3.25 for the FM33256 and $2.25 for the FM3316.

About Ramtron

Ramtron International Corporation, headquartered in Colorado Springs, Colorado, is a fabless semiconductor company that designs, develops and markets specialized semiconductor memory and integrated semiconductor solutions used in a wide range of product applications and markets worldwide. For more information, visit www.ramtron.com.

For a 300-dpi product photo, visit www.ramtron.com/doc/Press/Images.asp.

Contact Information