REGI U.S., Inc.
OTC Bulletin Board : RGUS
FRANKFURT : RGJ

Reg Technologies Inc.
OTC Bulletin Board : REGRF
TSX VENTURE : RRE

July 07, 2009 09:15 ET

REGI U.S., Inc./Reg Technologies Inc. New RadMax® Green Diesel Engine Design Ready for Manufacturing

VANCOUVER, BRITISH COLUMBIA--(Marketwire - July 7, 2009) - REGI U.S., Inc. (OTCBB:RGUS)(FRANKFURT:RGJ) and Reg Technologies Inc. (TSX VENTURE:RRE)(OTCBB:REGRF) are pleased to announce that a complete set of manufacturing drawings have been completed and released for competitive bid.

The drawing baseline incorporates the following technical features:

- The new improved RadMax® Diesel Engine design has incorporated solutions for vane actuation, cooling, and lubrication. All designs have been incrementally reviewed by the REGI U.S., Inc. and the Fortune 1000 company engineers.

- Extensive computer modeling with COSMOS has produced a lower-weight, higher-strength design. The modeling has lead to an implementation that significantly reduces centripetal forces between the vanes and the seals.

With this approved design, the test program will start shortly after receipt of the RadMax® parts and assemblies. The tests will initially validate seal performance, vane actuation, pressurization, and lubrication. A series of tests will verify other technology areas, already proven by extensive analysis.

IMPORTANT TASKS ACCOMPLISHED AS FOLLOWS:

- Rotor cooling system design completed

- Seal lubrication design completed

- The stator ramp design completed driven by an Excel spreadsheet model

- The vane actuator assembly completed reducing weight and friction

- The new vane actuator design does not require any return springs

- The Cam ramp design completed driven by an Excel spreadsheet model

- The Cam incorporates a water-cooling system.

Robert Grisar, Vice President of Engineering, comments, "The objective of the new improved diesel engine design is to make significant improvement over all existing engine designs in use today. The RadMax® engine reduces weight, number of parts, and complexity, and will use less fuel, and, therefore, reduce hydrocarbons. The COSMOS analysis on the engine has created a low cost, producible design."

SUMMARY

The design incorporates changes recommended to date by the Fortune Company and REGI U.S., Inc. Engineers have analyzed the stress deflections of the vane actuator forces and these are now acceptable for the new diesel engine implementation.

Fabrication of the new diesel engine parts is now underway and a comprehensive testing program will immediately follow. The goal is to license the technology to interested end users for several different applications.

John Robertson, President of REGI U.S., Inc., wishes to congratulate the REGI and Fortune Company's engineering team for their perseverance and hard work that has accomplished the goal of reducing the size, stress and number of parts in the engine design, including incorporating solutions for the engine cooling and lubrication.

ABOUT REGI U.S., INC. AND REG TECHNOLOGIES INC.

Reg Technologies Inc. and REGI U.S., Inc. are developing an improved axial vane type rotary engine known as the RadMax® rotary technology used in the revolutionary design of lightweight and high efficiency engines, compressors and pumps. The RadMax® design was mainly developed by Radian Milparts, a large aerospace company, and assigned to REGI U.S., Inc. in December 2005. The RadMax® engine has only two unique moving parts, the vanes (up to 12) and the rotor, compared to the 40 moving parts in a simple four-cylinder piston engine. This innovative design makes it possible to produce up to 24 continuous power impulses per one rotation that is vibration-free and extremely quiet.

The RadMax® engine also has multi-fuel capabilities allowing it to operate on fuels including gasoline, natural gas, hydrogen, propane and diesel. REGI U.S., Inc. and its parent company, Reg Technologies Inc., have built and tested a RadMax® pump application for demonstration purposes and are currently designing and testing the RadMax® diesel for a Fortune 1000 Company intended for aviation, automotive, industrial processes and military applications.
For more information, please visit www.regtech.com.

ON BEHALF OF THE BOARD OF DIRECTORS

REGI U.S., Inc.

John Robertson, President

Reg Technologies Inc.

John Robertson, President

READER ADVISORY

Statements in this press release regarding the business of Reg Technologies Inc. and REGI U.S, Inc. (together the "Companies") which are not historical facts are "forward-looking statements" that involve risks and uncertainties, including management's assessment of future plans and operations, and capital expenditures and the timing thereof, certain of which are beyond the Companies' control. There can be no assurance that such statements will prove accurate, and actual results and developments are likely to differ, in some cases materially, from those expressed or implied by the forward-looking statements contained in this press release. Readers of this press release are cautioned not to place undue reliance on any such forward-looking statements.

Forward-looking statements contained in this press release are based on a number of assumptions that may prove to be incorrect, including, but not limited to: the impact of competitive products and pricing, the Companies' dependence on third parties and licensing/service supply agreements, and the ability of competitors to license the same technologies as the Companies or develop or license other functionally equivalent technologies; financing requirements; changes in laws, rules and regulations applicable to the Companies and changes in how they are interpreted and enforced, delays resulting from or inability to obtain required regulatory approvals and ability to access sufficient capital from internal and external sources, the impact of general economic conditions in Canada, and the United States, industry conditions, increased competition, the lack of availability of qualified personnel or management, fluctuations in foreign exchange, stock market volatility and market valuations of companies with respect to announced transactions. The Companies' actual results, performance or achievements could differ materially from those expressed in, or implied by, these forward-looking statements, including those described in Reg Technologies' financial statements, management discussion and analysis and material change reports filed with the Canadian Securities Administrators and available at www.sedar.com, and its Form 20-F filed with the United States Securities and Exchange Commission at www.sec.gov, and REGI's Form 10-KSB annual report filed with the United States Securities and Exchange Commission at www.sec.gov. Accordingly, no assurances can be given that any of the events anticipated by the forward-looking statements will transpire or occur, or if any of them do so, what benefits, including the amount of proceeds, that the Companies will derive therefrom.

Readers are cautioned that the foregoing list of factors is not exhaustive. All subsequent forward-looking statements, whether written or oral, attributable to the Companies or persons acting on their behalf are expressly qualified in their entirety by these cautionary statements. Furthermore, the forward-looking statements contained in this news release are made as at the date of this news release and the Companies do not undertake any obligation to update publicly or to revise any of the included forward-looking statements, whether as a result of new information, future events or otherwise, except as may be required by applicable securities laws.

The TSX Venture Exchange has neither approved nor disapproved of the information contained herein.

Contact Information

  • REGI U.S., Inc. and Reg Technologies Inc.
    John Robertson
    (604) 278-5996 or Toll Free: 1-800-665-4616
    (604) 278-3409 (FAX)
    www.regtech.com