Silvercorp Metals Inc.
TSX : SVM

Silvercorp Metals Inc.

March 27, 2006 12:39 ET

Silvercorp Metals Inc.: Drill Intersects 0.49 Metres Grading 7,399 Grams, 238 Ounces, per Tonne Silver and 44% Lead & Zinc on S16W1 Vein at the Ying Silver Project, China

VANCOUVER, BRITISH COLUMBIA--(CCNMatthews - March 27, 2006) - Silvercorp Metals Inc. ("Silvercorp") (TSX:SVM) is pleased to report the new and compiled results for the drill programs completed between April 2005 up to the end of February, 2006 on the high-grade Ying Silver-Lead-Zinc project in Henan province, China. A total of 12,785 metres (m) of diamond drilling was completed during the period in 62 underground (8,646 metres) and 8 surface (4,139 metres) drill holes. Silvercorp is operating two surface and 5 underground rigs at the SGX camp with an additional underground rig operating at the YLG camp. In addition to drilling, Silvercorp continues to complete nearly 2,500 metres (m) of access and drifting tunnels per month.

The underground holes are systematically drilled from tunnels to a maximum depth of 300m, along the strike of the veins to test the continuity of massive galena sheet mineralization. The underground holes were drilled at elevations ranging from 460m to 570m, with spacing of 50-100m along the strike direction and 40-80m on the dipping direction. The surface holes are part of the 10,000m deep drill program announced November 7, 2005, and designed to test the continuation of mineralization at depth and to test vein structure below 350m from surface.

Highlights of drill hole interceptions include:

- Of the 86 holes drilled so far, every hole intercepted the mineralized vein structure and 30 of the holes hit massive galena sheets (MGS) exceeding a 1,250 g/t Ag-equivalent grade cut-off giving a 35% drilling success rate. This success rate is comparable to the average of 32% ratio of mineralization (or tunneling success rate) for tunneling on all 9 veins (S2, S2E, S4, S6, S7, S8, S14, S16E and S16W), based on almost 15,000m of drifting completed. The ratio of mineralization (or tunneling success rate) is calculated on the projected longitudinal section of a vein based on the total area of MGS blocks with Ag equivalent grade above the 1,250 g/t Ag-equivalent grade cutoff divided by the entire area of the veins exposed by tunnels.

- Based on the deep hole drilling, all above 9 veins extend to 500m in depth along the down dip direction from surface, with the S16W being traced to nearly 600m from surface and the S14 vein to nearly 700m from surface;

- Surface drill hole ZK0812 intersected 0.3m of massive galena sheet (core length) in the S2 Vein grading 3,124 g/t (100.45 oz/t) Ag, 47.53% Pb, and 0.79% Zn at 284.67m elevation, over 400m from surface;

- Underground hole ZK5602 intersected 0.49m of massive galena sheet (core length) in the S16W1 Vein carrying 7,399 g/t (237.88 oz/t) Ag, 39.65% Pb, and 4.40% Zn;

- Underground hole ZK134 intersected 0.50m of massive sphelarite sheet (core length) in the S16E Vein containing 3,062 g/t (98.45 oz/t) Ag, 7.25% Pb, and 48.70% Zn; and

- Underground hole ZK601 cut 0.92m of massive galena sheet (core length) in the S8 Vein grading 961 g/t (30.90 oz/t) Ag, 23.05% Pb, 9.22% Zn, and 4.26% Cu;



Drill interception assays are listed in the Table below. These do not
necessarily reflect true widths:

--------------------------------------------------------------------
Intersection Core Distance
Drill Mineralized From To Intervals South of Elevation
Hole Veins (m) (m) (m) CM103 (m) (m)
--------------------------------------------------------------------
Surface Holes
--------------------------------------------------------------------
ZK0218 S14 276.93 277.25 0.32 630.00 320.80
--------------------------------------------------------------------
ZK0608 S2 194.20 194.75 0.55 476.18 386.00
S2E 200.50 201.40 0.90 477.00 380.18
--------------------------------------------------------------------
ZK0808 S2 180.95 181.35 0.40 413.37 395.40
S6 233.40 235.50 2.10 417.53 347.50
--------------------------------------------------------------------
ZK0812 S1 163.93 164.33 0.40 412.60 397.33
S2 280.53 281.63 1.10 412.60 284.67
including 281.33 281.63 0.30 412.60 284.67
S6 315.08 316.08 1.00 416.77 251.72
S14 432.83 434.13 1.30 422.21 139.66
--------------------------------------------------------------------
ZK0818 S2 227.90 229.00 1.10 414.84 329.05
S6 404.10 404.27 0.17 430.67 155.76
S14 515.40 515.80 0.40 437.75 45.99
--------------------------------------------------------------------
ZK1208 S21(i) 328.70 330.20 1.50 232.80 500.64
331.80 333.60 1.80 232.80 498.76-
497.28
including 332.10 333.60 1.50 232.80 498.07-
497.28
S16W 501.90 502.15 0.25 358.88 330.81
S16W1 574.00 574.27 0.27 354.65 259.58
--------------------------------------------------------------------
ZK1416 S5 67.46 67.86 0.40 85.00 559.27
S6 316.00 317.15 1.15 -2.27 312.04
S14 419.27 420.75 1.48 16.00 209.45
--------------------------------------------------------------------
ZK1209 S21 308.00 308.60 0.60 266.81 528.98
S16W 466.60 466.80 0.20 392.87 374.18
--------------------------------------------------------------------
ZK6008(i) S21 109.10 115.20 6.10 114.00 672.29-
668.80
including 111.18 114.40 3.22 114.00 671.68-
669.06
--------------------------------------------------------------------
Underground Holes
--------------------------------------------------------------------
ZK5602 S16E1 34.29 35.14 0.85 346.98 553.25
S16E 69.91 70.18 0.27 366.36 528.50
S16W 119.04 119.48 0.20 406.76 493.76
S16W1 132.43 132.86 0.43 414.11 484.29
--------------------------------------------------------------------
ZK1205 S14 98.6 99.5 0.9 133.20 395.71
--------------------------------------------------------------------
ZK131 S16E1 19.33 20.04 0.71 761.00 564.83
S16E 30.84 32.14 1.3 761.00 558.20
--------------------------------------------------------------------
ZK132 S16E1 23.92 26.83 2.9 761.27 555.49
S16E 66.94 68.63 1.69 740.07 518.52
S16W 185.04 187.52 2.48 676.00 422.27
--------------------------------------------------------------------
ZK133 S16E2 4.72 5.75 1.03 639.69 573.60
S16E1 12.88 13.57 0.69 643.90 568.27
--------------------------------------------------------------------
ZK134 S16E 38.56 39.06 0.5 770.00 540.85
--------------------------------------------------------------------
ZK135 S16E 48.02 48.35 0.33 822.00 547.23
S16W 117.97 119.34 1.37 868.77 502.56
--------------------------------------------------------------------
ZK136 S16E 64.25 66.92 2.67 806.30 518.06
--------------------------------------------------------------------
ZK1404 S14 75.01 75.68 0.68 40.00 455.13
--------------------------------------------------------------------
ZK1406 S14 68.26 68.47 0.21 119.00 458.41
--------------------------------------------------------------------
ZK1407 S14 104.6 104.8 0.2 97.54 422.45
--------------------------------------------------------------------
ZK1806 S2 110.2 111 0.8 -125.82 388.29
--------------------------------------------------------------------
ZK1810 S2E 65 66.1 1.1 -82.16 425.95
S2 74.4 74.6 0.2 -84.36 421.08
--------------------------------------------------------------------
ZK1811 S2E 53.7 53.95 0.25 -118.63 441.95
S2 90.3 90.6 0.3 -127.78 427.04
--------------------------------------------------------------------
ZK42 S7 165.98 166.27 0.29 423.54 452.68
--------------------------------------------------------------------
ZK4A04 S8 107 107.12 0.12 390.00 627.29
--------------------------------------------------------------------
ZK4A05 S7 113.13 113.46 0.33 412.50 479.11
--------------------------------------------------------------------
ZK5102 S16E 79.74 81.24 1.5 745.00 462.94
--------------------------------------------------------------------
ZK5302 S16E 74.75 77.18 2.43 611.50 459.25
--------------------------------------------------------------------
ZK5501 S16E 83.09 86.33 3.24 685.76 481.64
--------------------------------------------------------------------
ZK5502 S16E1 73.01 73.63 0.62 690.35 476.01
S16E 91.76 92.4 0.64 680.60 460.26
--------------------------------------------------------------------
ZK5701 S16E 38.3 39.92 1.62 728.71 501.37
--------------------------------------------------------------------
ZK5802 S16E 39.19 41.44 2.25 331.70 543.28
S16W1 77.34 77.72 0.38 348.82 512.86
S16W 93.22 93.5 0.28 351.10 499.62
--------------------------------------------------------------------
ZK5803 S21 120.58 120.79 0.21 184.34 492.61
--------------------------------------------------------------------
ZK5804 S16W 178.46 180.47 2.01 352.60 399.74
--------------------------------------------------------------------
ZK601 S8-1 100.12 100.29 0.17 352.90 529.71
S8 105.37 106.29 0.92 352.90 526.98
--------------------------------------------------------------------
ZK7004 S16E 103.42 104.92 1.5 40.69 456.85
--------------------------------------------------------------------
ZK7402 S16E 100.29 100.45 0.16 -45.99 505.22
S16W 127.69 129.26 1.57 -68.99 489.53
--------------------------------------------------------------------
ZK7404 S16E 142.9 144.23 1.33 -6.84 443.16
S16W 145.29 145.92 0.63 -23.00 441.79
S16W1 170.3 170.63 0.33 -23.00 421.80
--------------------------------------------------------------------
ZK5902 S16E1 57.86 58.24 0.38 761.70 488.07
--------------------------------------------------------------------
ZK1812 S2E 102.26 102.46 0.2 -164.44 432.23
--------------------------------------------------------------------
ZK5402(i) S21 100.68 100.98 0.3 424.00 508.94
--------------------------------------------------------------------
ZK1401(i) S14 39.75 40.55 0.8 228.00 481.00
--------------------------------------------------------------------
ZK1402(i) S14 65.53 65.83 0.3 229.00 452.00
--------------------------------------------------------------------
ZK5001(i) S16E 75.32 76.16 0.84 530.00 526.00
--------------------------------------------------------------------
ZK802(i) S14 90.97 91.59 0.62 569.00 440.00
--------------------------------------------------------------------
ZK804(i) S14 81.64 82.07 0.43 558.00 480.00
--------------------------------------------------------------------
ZK805(i) S14 72.07 72.46 0.39 583.00 480.00
--------------------------------------------------------------------
ZK1801(i) S2 82.07 83.74 1.67 -106.00 425.00
--------------------------------------------------------------------
ZK1802(i) S2 97.01 97.33 0.32 -32.00 441.66
S2E 100.07 101.22 1.15 -32.00 439.43
--------------------------------------------------------------------
ZK1803(i) S2 91.66 92.66 1.00 -146.00 441.54
S2E 97.16 97.62 0.46 -150.00 438.55
--------------------------------------------------------------------
ZK5603(i) S21 54.32 54.54 0.22 225.32 579.06
--------------------------------------------------------------------
ZK5202(i) S16W 122.26 122.36 0.10 472 473.24
S16E 130.43 131.29 0.86 424.2 527.63
--------------------------------------------------------------------
ZK5401(i) S16W 154.24 155.40 1.16 416 519.38
S16W1 157.84 160.39 2.55 416 517.67
--------------------------------------------------------------------


--------------------------------------------------------------------
Drill Ag Ag Pb Zn Ag Equiv. Ag Equiv. Cu
Hole (g/t) (oz/t) (%) (%) (g/t)(ii) (oz/t)(ii) (%)
--------------------------------------------------------------------
--------------------------------------------------------------------
Surface Holes
--------------------------------------------------------------------
ZK0218 1538 49.45 9.33 0.83 1971 63.37 NA
--------------------------------------------------------------------
ZK0608 306 9.83 3.17 3.23 593 19.06 NA
231 7.44 1.51 1.58 370 11.90 NA
--------------------------------------------------------------------
ZK0808 237 7.61 0.98 16.59 1066 34.26 NA
14 0.46 3.00 0.03 142 4.58 NA
--------------------------------------------------------------------
ZK0812 99 3.19 3.40 0.61 272 8.73 NA
990 31.83 14.46 5.08 1841 59.19 NA
3124 100.45 47.53 0.79 5167 166.14 NA
114 3.66 2.03 7.03 533 17.15 NA
191 6.14 0.47 0.93 255 8.20 NA
--------------------------------------------------------------------
ZK0818 22 0.69 0.34 3.65 209 6.73 NA
390 12.53 17.49 0.16 1135 36.50 NA
224 7.19 1.34 0.92 324 10.41 NA
--------------------------------------------------------------------
ZK1208 1010 32.47 0.10 0.24 1026 32.98 NA
2853 91.73 34.43 2.91 4444 142.87 NA
4309 138.54 26.98 2.95 5587 179.63 NA
1255 40.35 15.22 1.40 1964 63.14 NA
31 1.00 5.86 0.19 287 9.24 NA
--------------------------------------------------------------------
ZK1416 111 3.58 5.98 4.09 558 17.93 NA
mineralized vein structure
mineralized vein structure
--------------------------------------------------------------------
ZK1209 135 4.34 11.92 18.66 1524 48.99 NA
149 4.80 5.36 2.10 475 15.28 NA
--------------------------------------------------------------------
ZK6008(i) 2277 73.21 32.06 7.01 3963 127.41 NA
3287 105.68 54.05 6.50 5876 188.93 NA
--------------------------------------------------------------------
Underground Holes
--------------------------------------------------------------------
ZK5602 584.8 18.80 0.13 4.81 818 26.31 NA
407 13.09 2.66 1.82 606 19.48 NA
386.4 12.42 2.92 5.36 764 24.57 NA
7399 237.88 39.65 4.40 9281 298.39 NA
--------------------------------------------------------------------
ZK1205 380 12.22 8.25 3.70 904 29.06 NA
--------------------------------------------------------------------
ZK131 653 21.00 0.15 5.78 934 30.02 NA
317 10.19 0.29 1.88 418 13.45 NA
--------------------------------------------------------------------
ZK132 505 16.22 1.84 1.13 636 20.44 NA
1996 64.16 44.42 9.07 4301 138.27 NA
409 13.16 0.24 0.33 435 13.99 NA
--------------------------------------------------------------------
ZK133 702 22.55 1.43 2.20 866 27.85 NA
639 20.55 1.50 7.95 1080 34.72 NA
--------------------------------------------------------------------
ZK134 3062 98.45 7.25 48.70 5680 182.62 NA
--------------------------------------------------------------------
ZK135 1978 63.61 2.08 6.74 2386 76.72 NA
106 3.42 17.98 15.06 1580 50.80 NA
--------------------------------------------------------------------
ZK136 41 1.31 0.22 9.30 492 15.81 NA
--------------------------------------------------------------------
ZK1404 338 10.87 0.42 0.91 399 12.83 NA
--------------------------------------------------------------------
ZK1406 64 2.06 3.73 2.97 362 11.65 NA
--------------------------------------------------------------------
ZK1407 282 9.05 13.55 3.67 1028 33.04 NA
--------------------------------------------------------------------
ZK1806 277 8.89 0.39 7.61 654 21.04 NA
--------------------------------------------------------------------
ZK1810 246 7.90 35.00 6.53 2032 65.34 NA
282 9.08 28.51 3.36 1645 52.88 NA
--------------------------------------------------------------------
ZK1811 785 25.24 39.55 4.21 2654 85.32 NA
248 7.98 7.35 2.66 685 22.02 NA
--------------------------------------------------------------------
ZK42 272 8.74 22.95 7.34 1589 51.07 NA
--------------------------------------------------------------------
ZK4A04 721 23.19 11.62 5.73 1484 47.70 NA
--------------------------------------------------------------------
ZK4A05 363 11.66 11.05 0.12 835 26.85 NA
--------------------------------------------------------------------
ZK5102 169 5.44 1.06 15.08 930 29.90 NA
--------------------------------------------------------------------
ZK5302 352 11.33 6.07 6.77 930 29.90 NA
--------------------------------------------------------------------
ZK5501 729 23.45 13.76 16.79 2107 67.74 NA
--------------------------------------------------------------------
ZK5502 182 5.85 2.79 12.56 895 28.79 NA
345 11.09 18.89 23.79 2271 73.03 NA
--------------------------------------------------------------------
ZK5701 205 6.58 0.16 0.19 220 7.09 NA
--------------------------------------------------------------------
ZK5802 3 0.10 3.00 0.04 131 4.23 NA
35 1.12 0.95 3.11 223 7.16 NA
1128 36.27 42.25 1.02 2959 95.14 NA
--------------------------------------------------------------------
ZK5803 682 21.92 5.50 21.70 1944 62.50 NA
--------------------------------------------------------------------
ZK5804 1033 33.21 57.40 0.47 3477 111.80 NA
--------------------------------------------------------------------
ZK601 747 24.03 27.24 14.09 2566 82.49 0.18
961 30.90 23.05 9.22 2372 76.25 4.26
--------------------------------------------------------------------
ZK7004 111 3.58 0.23 0.16 129 4.13 NA
--------------------------------------------------------------------
ZK7402 55 1.76 13.10 0.15 615 19.76 NA
367 11.81 17.71 10.54 1615 51.92 NA
--------------------------------------------------------------------
ZK7404 14 0.44 0.05 0.62 45 1.45 NA
1945 62.53 8.03 9.82 2750 88.41 0.17
1502 48.29 18.36 5.65 2545 81.83 NA
--------------------------------------------------------------------
ZK5902 35.1 1.13 0.10 6.55 350 11.26 NA
--------------------------------------------------------------------
ZK1812 58.4 1.88 2.02 1.75 227 7.29 NA
--------------------------------------------------------------------
ZK5402(i) 1246 40.06 20.57 2.79 2246 72.23 NA
--------------------------------------------------------------------
ZK1401(i) 179 5.76 6.13 3.66 611 19.66 NA
--------------------------------------------------------------------
ZK1402(i) 1717 55.20 24.70 30.19 4192 134.79 NA
--------------------------------------------------------------------
ZK5001(i) 253 8.13 4.04 9.50 874 28.11 NA
--------------------------------------------------------------------
ZK802(i) 3942 126.74 49.57 1.91 6124 196.91 NA
--------------------------------------------------------------------
ZK804(i) 3215 103.37 54.37 0.86 5550 178.44 NA
--------------------------------------------------------------------
ZK805(i) 1048 33.69 19.00 1.30 1911 61.46 NA
--------------------------------------------------------------------
ZK1801(i) 1104 35.49 16.64 12.94 2421 77.83 NA
--------------------------------------------------------------------
ZK1802(i) 342 11.01 22.05 0.86 1314 42.23 NA
51 1.63 3.62 3.41 365 11.74 NA
--------------------------------------------------------------------
ZK1803(i) 229 7.38 1.12 9.41 723 23.25 NA
1399 44.96 9.20 41.95 3779 121.48 NA
--------------------------------------------------------------------
ZK5603(i) 1471 47.28 31.06 9.35 3225 103.69 NA
--------------------------------------------------------------------
ZK5202(i) 880 28.29 10.56 10.66 1832 58.89 NA
49 1.58 0.05 2.86 187 6.01 NA
--------------------------------------------------------------------
ZK5401(i) 1066 34.28 10.47 2.34 1619 52.07 NA
968 31.13 11.83 3.19 1619 52.05 NA
--------------------------------------------------------------------

(i) Previously reported results;
(ii) Silver equivalent grade is calculated on the basis of US$6.5/oz
Ag, US$0.40/lb for Pb, and US$0.45/lb for Zn. Cu is not in silver
equivalent grade calculation.


Collar Co-Ordinates of the drill holes are as follows:

--------------------------------------------------------------------
Drill Easting Northing Elevation Length
Hole (m) (m) (m) Azimuth Dip (m)
--------------------------------------------------------------------
Surface Holes
--------------------------------------------------------------------
ZK0218 522929.39 3782417.48 597.44 115 -88 341.10
--------------------------------------------------------------------
ZK0608 522903.16 3782664.10 555.54 156 -60 468.30
--------------------------------------------------------------------
ZK0808 522903.61 3782664.55 555.82 115 -65 394.10
--------------------------------------------------------------------
ZK0812 522903.07 3782664.84 555.79 115 -75 487.00
--------------------------------------------------------------------
ZK0818 522904.27 3782665.94 555.82 116 -82 567.35
--------------------------------------------------------------------
ZK1208 523745.66 3782399.70 826.78 270 -81 615.00
--------------------------------------------------------------------
ZK1209 523696.54 3782386.68 806.85 273 -80 488.50
--------------------------------------------------------------------
ZK1416 523129.54 3782906.70 626.63 95 -83 550.05
--------------------------------------------------------------------
Underground Holes
--------------------------------------------------------------------
ZK5602 523621.48 3782448.54 577.94 219 -45 184.58
--------------------------------------------------------------------
ZK1205 523137.93 3782829.83 483.57 195 -62 143.6
--------------------------------------------------------------------
ZK131 523585.75 3782000.68 577.61 336 -39 161.8
--------------------------------------------------------------------
ZK132 523587.19 3781999.83 577.73 343 -56 239.04
--------------------------------------------------------------------
ZK133 523585.05 3781999.33 577.52 287 -43 170.94
--------------------------------------------------------------------
ZK134 523586.1 3781998.99 577.55 293 -70 232.63
--------------------------------------------------------------------
ZK135 523586.38 3781996.64 577.66 218 -39 184.23
--------------------------------------------------------------------
ZK136 523587.35 3781997.27 577.69 200 -63 239.75
--------------------------------------------------------------------
ZK1404 523233.14 3782879.47 517.13 38 -55 102.28
--------------------------------------------------------------------
ZK1406 523231.84 3782877.86 517.1 212 -59 78.28
--------------------------------------------------------------------
ZK1407 523141.64 3782833.27 484.05 64 -36 153
--------------------------------------------------------------------
ZK1806 523099.26 3783083.09 463.99 2 -43 170.6
--------------------------------------------------------------------
ZK1810 523097.83 3783082.78 463.87 331 -35 76
--------------------------------------------------------------------
ZK1811 523099.11 3783082.99 463.89 352 -24 121
--------------------------------------------------------------------
ZK1812 523099.4 3783083.12 464.31 1 -18 140
--------------------------------------------------------------------
ZK42 523633.35 3782244.89 572.29 123 -46 181.93
--------------------------------------------------------------------
ZK4A04 523805.85 3782134.64 577 115 28 113
--------------------------------------------------------------------
ZK4A05 523805.47 3782136.09 575.33 295 -58 141.09
--------------------------------------------------------------------
ZK5102 523596.75 3782155.28 535.33 345 -63 90.06
--------------------------------------------------------------------
ZK5302 523596.01 3782157.17 535.48 270 -81 83.02
--------------------------------------------------------------------
ZK5501 523596.75 3782155.28 535.33 189 -39 95.48
--------------------------------------------------------------------
ZK5502 523594.03 3782046.28 537.76 352 -57 129.1
--------------------------------------------------------------------
ZK5701 523591.9 3782045.29 537.84 270 -66 69.18
--------------------------------------------------------------------
ZK5802 523621.01 3782449.63 578.04 258 -57 135.2
--------------------------------------------------------------------
ZK5803 523623.93 3782448.73 578.02 85 -45 192.86
--------------------------------------------------------------------
ZK5804 523621.72 3782449.33 577.99 241 -81 194.27
--------------------------------------------------------------------
ZK5902 523593.93 3782044.18 537.99 190 -59 59.63
--------------------------------------------------------------------
ZK601 523806.16 3782141.93 575.24 79 -27 122.96
--------------------------------------------------------------------
ZK7004 523629.48 3782725.9 559.84 299 -79 181.8
--------------------------------------------------------------------
ZK7402 523628.93 3782728 559.93 338 -33 162.82
--------------------------------------------------------------------
ZK7404 523629.85 3782726.96 559.84 351 -54 193.76
--------------------------------------------------------------------


Diamond drill hole locations are available on the Company's website: www.silvercorp.ca.

Exploration and development of the Ying Project is carried out through Silvercorp's 77.5% subsidiary, Henan Found Mining Co. Ltd., a Sino-foreign joint venture company which holds 100% of the Ying Project and operates under a 30-year business license. Myles Gao, P.Geo, is the Company's Qualified Person on the project under NI 43-101.

Quality Control

The Company's Quality Control/Quality Assurance Program is disclosed in the January 4, 2006 Press Release.

Statements in this press release other than purely historical information, including statements relating to the Company's future plans and objectives or expected results, constitute forward-looking statements. Forward-looking statements are based on numerous assumptions and are subject to all of the risks and uncertainties inherent in the Company's business, including risks inherent in mineral exploration and development. As a result, actual results may vary materially from those described in the forward-looking statements.

Contact Information

  • Silvercorp Metals Inc.
    Rui Feng
    Chairman & CEO
    (604) 669-9397
    or
    Silvercorp Metals Inc.
    Cathy Fong
    VP Corporate Development
    (604) 669-9397
    (604) 669-9387 (FAX)
    info@silvercorp.ca
    www.silvercorp.ca