Taseko Mines Limited
AMEX : TGB
TSX : TKO

Taseko Mines Limited

May 01, 2008 09:01 ET

Taseko Purchases Royalty Interest, Initiates Drilling at Gibraltar Mine

VANCOUVER, BRITISH COLUMBIA--(Marketwire - May 1, 2008) - Taseko Mines Limited ("Taseko" or the "Company") (TSX:TKO)(AMEX:TGB) is pleased to announce that it has purchased a 30% Net Profits Interest in claims that are part of the Gibraltar mine property and located adjacent to the Gibraltar East pit. The purchase was structured as the acquisition of a privately held company, Oakmont Ventures Ltd., whose sole asset was the 30% net profits interest. The purchase price was approximately $5 million.

A drill program on the Oakmont ground in the 1980's by a previous operator indicated significant mineralization exists on these claims which adjoin the Gibraltar East pit, the original starter pit of the Gibraltar operation. Geological interpretation from surface and drilling information suggests this mineralization is likely an extension of the Gibraltar East and West deposits.

The results of the drilling program are included in the Table of Oakmont Assay Results, as attached. Highlights are as follows:



----------------------------------------------------------
Drill Hole From To Intercept Cu Mo
Number (feet) (Feet) (Feet) (%) (%)
----------------------------------------------------------
92-28 490 740 250 1.063 0.002
----------------------------------------------------------
E90-15 430 740 310 0.818 0.004
----------------------------------------------------------
E90-16 380 780 400 0.671 0.002
----------------------------------------------------------


A historical estimate performed in 1993 by an independent mining consultant indicates there is approximately 70-80 million tons of mineralization on the Oakmont ground at an average grade of 0.40% copper, with minor amounts of silver, gold and zinc. This determination was based on assays from 90 drill holes averaging 850 feet deep(1).

Russell E. Hallbauer, President and CEO of Taseko, commented, "The acquisition of the Oakmont interest is very strategic to Gibraltar. Based on our preliminary review of Placer's drill program, it is apparent that the higher grade mineralization mined in the 1970's in the Gibraltar East pit continues onto the Oakmont ground. The detailed drilling program we have planned is expected to provide a significant increase in Gibraltar mineral resources with grades comparable to those mined from the Gibraltar East pit."

John McManus, P.Eng., Senior Vice President, Operations for Taseko and a qualified person, has reviewed and approved the contents of this news release.

Russell Hallbauer, President and CEO

Forward Looking Statements

This release includes certain statements that may be deemed "forward-looking statements". All statements in this release, other than statements of historical facts, that address future production, reserve potential, exploration drilling, exploitation activities and events or developments that the Company expects are forward-looking statements. Although the Company believes the expectations expressed in such forward-looking statements are based on reasonable assumptions, such statements are not guarantees of future performance and actual results or developments may differ materially from those in the forward-looking statements. Factors that could cause actual results to differ materially from those in forward-looking statements include market prices, exploitation and exploration successes, lack of continuity of mineralization, continued availability of capital and financing, and general economic, market or business conditions. Investors are cautioned that any such statements are not guarantees of future performance and that actual results or developments may differ materially from those projected in the forward-looking statements. For more information on the Company, Investors should review the Company's annual Form 20-F filing with the United States Securities and Exchange Commission or the Company's home jurisdiction filings at www.sedar.com.

(1) The Company believes that the historical information provided herein is reliable and continues to be relevant. The potential quantity and grade estimates set out herein are conceptual in nature and there has been insufficient exploration to define a mineral resource, it is uncertain if further exploration will result in the target being delineated as a mineral resource, and the estimates have been made based on historical information. A qualified person has not done sufficient work to classify the historical estimates as current mineral resources or reserves and the Company is not treating the historical estimates as current mineral resources or mineral reserves as defined in Sections 1.2 and 1.3 of National Instrument 43-101, and therefore the estimates should not be relied upon.



TABLE OF OAKMONT ASSAY RESULTS

----------------------------------------------------------
Drill Hole From To Intercept Cu Mo
Number (feet) (feet) (feet) (%) (%)
----------------------------------------------------------
86-54 80 100 20 0.340 0.001
----------------------------------------------------------
87-01 90 200 110 0.563 0.001
----------------------------------------------------------
87-01 210 260 50 0.254 0.004
----------------------------------------------------------
89-01 120 240 120 0.413 0.001
----------------------------------------------------------
89-32 190 290 100 0.313 0.002
----------------------------------------------------------
89-36 110 160 50 0.432 0.002
----------------------------------------------------------
89-36 230 330 100 0.240 0.002
----------------------------------------------------------
91-08 360 380 20 0.355 0.001
----------------------------------------------------------
91-08 470 500 30 0.253 0.001
----------------------------------------------------------
91-08 580 630 50 0.448 0.003
----------------------------------------------------------
91-08 710 750 40 0.618 0.001
----------------------------------------------------------
91-08 860 890 30 0.663 0.001
----------------------------------------------------------
91-09 460 480 20 0.495 0.001
----------------------------------------------------------
91-09 570 590 20 0.295 0.011
----------------------------------------------------------
91-09 840 860 20 0.750 0.003
----------------------------------------------------------
91-09 900 920 20 0.295 0.001
----------------------------------------------------------
91-09 980 1000 20 0.455 0.001
----------------------------------------------------------
91-10 170 200 30 0.283 0.002
----------------------------------------------------------
91-10 480 510 30 0.500 0.001
----------------------------------------------------------
91-10 660 680 20 0.310 0.001
----------------------------------------------------------
91-10 810 870 60 0.323 0.003
----------------------------------------------------------
91-10 950 970 20 0.385 0.001
----------------------------------------------------------
91-11 500 520 20 0.430 0.001
----------------------------------------------------------
91-12 340 720 380 0.533 0.003
----------------------------------------------------------
91-13 280 330 50 0.362 0.007
----------------------------------------------------------
91-13 410 700 290 0.640 0.002
----------------------------------------------------------
91-14 440 480 40 0.308 0.005
----------------------------------------------------------
91-14 560 630 70 0.611 0.004
----------------------------------------------------------
91-14 710 730 20 0.250 0.001
----------------------------------------------------------
91-14 880 900 20 1.130 0.001
----------------------------------------------------------
91-15 540 560 20 0.815 0.004
----------------------------------------------------------
91-15 620 700 80 1.293 0.001
----------------------------------------------------------
91-17 530 670 140 0.777 0.002
----------------------------------------------------------
91-17 710 730 20 1.040 0.008
----------------------------------------------------------
91-18 340 370 30 0.527 0.001
----------------------------------------------------------
91-18 450 470 20 0.650 0.001
----------------------------------------------------------
91-18 630 650 20 1.215 0.001
----------------------------------------------------------
91-19 230 270 40 0.573 0.002
----------------------------------------------------------
91-19 490 620 130 0.239 0.003
----------------------------------------------------------
91-20 800 830 30 0.373 0.001
----------------------------------------------------------
91-21 370 390 20 0.875 0.002
----------------------------------------------------------
91-21 440 550 110 0.442 0.002
----------------------------------------------------------
91-21 590 680 90 0.497 0.001
----------------------------------------------------------
91-27 310 390 80 0.511 0.001
----------------------------------------------------------
91-27 570 670 100 0.471 0.002
----------------------------------------------------------
91-27 810 880 70 0.551 0.001
----------------------------------------------------------
91-28 410 430 20 1.155 0.001
----------------------------------------------------------
91-28 520 560 40 0.508 0.001
----------------------------------------------------------
91-29 230 250 20 1.150 0.001
----------------------------------------------------------
91-29 280 380 100 0.641 0.001
----------------------------------------------------------
91-29 470 540 70 0.636 0.001
----------------------------------------------------------
91-29 630 720 90 0.289 0.001
----------------------------------------------------------
91-30 170 190 20 0.245 0.002
----------------------------------------------------------
91-30 320 390 70 0.370 0.001
----------------------------------------------------------
91-30 430 510 80 0.638 0.001
----------------------------------------------------------
91-30 540 620 80 0.539 0.001
----------------------------------------------------------
91-31 270 360 90 0.569 0.002
----------------------------------------------------------
91-31 400 430 30 0.270 0.002
----------------------------------------------------------
91-31 440 490 50 0.664 0.004
----------------------------------------------------------
91-31 590 610 20 0.430 0.001
----------------------------------------------------------
91-31 660 680 20 0.215 0.002
----------------------------------------------------------
91-32 390 430 40 1.015 0.011
----------------------------------------------------------
91-33 140 160 20 0.280 0.001
----------------------------------------------------------
91-33 270 340 70 0.453 0.001
----------------------------------------------------------
91-33 390 540 150 1.343 0.002
----------------------------------------------------------
91-33 600 710 110 0.746 0.003
----------------------------------------------------------
92-01 270 290 20 0.385 0.001
----------------------------------------------------------
92-01 410 510 100 0.513 0.001
----------------------------------------------------------
92-01 600 650 50 0.516 0.002
----------------------------------------------------------
92-02 40 70 30 0.827 0.001
----------------------------------------------------------
92-02 100 140 40 0.825 0.004
----------------------------------------------------------
92-02 380 490 110 0.541 0.006
----------------------------------------------------------
92-02 570 630 60 0.860 0.007
----------------------------------------------------------
92-02 660 684 24 0.403 0.001
----------------------------------------------------------
92-03 370 450 80 0.358 0.003
----------------------------------------------------------
92-04 240 260 20 0.615 0.001
----------------------------------------------------------
92-04 300 350 50 0.612 0.002
----------------------------------------------------------
92-04 410 430 20 0.495 0.001
----------------------------------------------------------
92-04 590 680 90 0.550 0.001
----------------------------------------------------------
92-04 760 780 20 0.605 0.001
----------------------------------------------------------
92-05 410 430 20 0.850 0.001
----------------------------------------------------------
92-05 500 690 190 0.494 0.001
----------------------------------------------------------
92-06 250 280 30 0.743 0.001
----------------------------------------------------------
92-06 390 620 230 0.730 0.001
----------------------------------------------------------
92-07 430 510 80 0.919 0.002
----------------------------------------------------------
92-07 620 670 50 0.338 0.001
----------------------------------------------------------
92-07 720 760 40 0.405 0.003
----------------------------------------------------------
92-08 260 280 20 0.345 0.109
----------------------------------------------------------
92-08 320 390 70 0.290 0.006
----------------------------------------------------------
92-08 430 460 30 0.350 0.001
----------------------------------------------------------
92-08 500 610 110 1.027 0.003
----------------------------------------------------------
92-08 670 730 60 0.680 0.001
----------------------------------------------------------
92-09 520 540 20 0.665 0.004
----------------------------------------------------------
92-10 250 270 20 0.250 0.001
----------------------------------------------------------
92-10 400 420 20 0.535 0.001
----------------------------------------------------------
92-11 550 640 90 0.334 0.001
----------------------------------------------------------
92-11 720 800 80 0.753 0.001
----------------------------------------------------------
92-12 250 420 170 0.626 0.001
----------------------------------------------------------
92-12 470 490 20 0.500 0.001
----------------------------------------------------------
92-12 520 690 170 0.541 0.005
----------------------------------------------------------
92-12 750 770 20 0.360 0.001
----------------------------------------------------------
92-13 140 190 50 0.330 0.001
----------------------------------------------------------
92-13 220 260 40 0.820 0.002
----------------------------------------------------------
92-13 370 390 20 0.910 0.001
----------------------------------------------------------
92-13 440 520 80 0.343 0.001
----------------------------------------------------------
92-13 580 620 40 0.718 0.003
----------------------------------------------------------
92-13 660 690 30 0.257 0.003
----------------------------------------------------------
92-13 720 750 30 1.147 0.004
----------------------------------------------------------
92-14 400 750 350 0.455 0.001
----------------------------------------------------------
92-14 840 860 20 0.240 0.001
----------------------------------------------------------
92-15 150 180 30 0.497 0.002
----------------------------------------------------------
92-15 270 310 40 0.325 0.001
----------------------------------------------------------
92-15 420 540 120 0.679 0.002
----------------------------------------------------------
92-15 610 670 60 0.508 0.001
----------------------------------------------------------
92-15 740 810 70 0.733 0.001
----------------------------------------------------------
92-17 250 280 30 0.583 0.002
----------------------------------------------------------
92-17 310 630 320 0.547 0.003
----------------------------------------------------------
92-17 690 800 110 0.329 0.001
----------------------------------------------------------
92-18 530 560 30 0.473 0.001
----------------------------------------------------------
92-18 640 790 150 0.633 0.001
----------------------------------------------------------
92-18 830 850 20 0.375 0.001
----------------------------------------------------------
92-19 240 270 30 0.857 0.001
----------------------------------------------------------
92-19 370 390 20 0.785 0.004
----------------------------------------------------------
92-19 500 700 200 1.151 0.003
----------------------------------------------------------
92-19 730 750 20 0.610 0.001
----------------------------------------------------------
92-20 380 400 20 0.505 0.011
----------------------------------------------------------
92-20 510 690 180 0.854 0.001
----------------------------------------------------------
92-20 730 800 70 0.724 0.001
----------------------------------------------------------
92-21 350 410 60 0.393 0.001
----------------------------------------------------------
92-21 460 480 20 0.220 0.002
----------------------------------------------------------
92-21 510 640 130 0.584 0.001
----------------------------------------------------------
92-21 740 760 20 0.395 0.001
----------------------------------------------------------
92-22 360 390 30 0.853 0.001
----------------------------------------------------------
92-22 490 690 200 0.605 0.001
----------------------------------------------------------
92-23 530 550 20 0.615 0.001
----------------------------------------------------------
92-23 570 590 20 0.535 0.005
----------------------------------------------------------
92-23 680 710 30 0.897 0.001
----------------------------------------------------------
92-24 430 480 50 0.588 0.001
----------------------------------------------------------
92-27 70 110 40 0.868 0.001
----------------------------------------------------------
92-27 290 350 60 0.653 0.003
----------------------------------------------------------
92-27 590 690 100 0.495 0.001
----------------------------------------------------------
92-27 730 880 150 0.641 0.001
----------------------------------------------------------
92-27 940 980 40 0.328 0.001
----------------------------------------------------------
92-28 220 240 20 0.345 0.002
----------------------------------------------------------
92-28 260 280 20 0.780 0.001
----------------------------------------------------------
92-28 490 740 250 1.063 0.002
----------------------------------------------------------
92-28 760 810 50 0.280 0.001
----------------------------------------------------------
92-29 160 190 30 0.350 0.001
----------------------------------------------------------
92-29 240 260 20 1.235 0.001
----------------------------------------------------------
92-29 290 320 30 0.460 0.002
----------------------------------------------------------
92-30 350 430 80 0.415 0.001
----------------------------------------------------------
92-30 490 520 30 0.427 0.001
----------------------------------------------------------
92-30 600 680 80 0.288 0.004
----------------------------------------------------------
92-30 780 830 50 0.374 0.001
----------------------------------------------------------
92-30 860 930 70 0.414 0.001
----------------------------------------------------------
92-31 490 510 20 0.465 0.001
----------------------------------------------------------
92-31 540 590 50 0.556 0.002
----------------------------------------------------------
92-31 670 730 60 0.687 0.004
----------------------------------------------------------
92-32 180 230 50 0.742 0.001
----------------------------------------------------------
92-32 360 380 20 0.220 0.001
----------------------------------------------------------
92-32 620 700 80 0.589 0.001
----------------------------------------------------------
92-32 830 850 20 0.410 0.001
----------------------------------------------------------
92-33 530 610 80 0.434 0.001
----------------------------------------------------------
92-33 660 680 20 0.580 0.002
----------------------------------------------------------
92-33 870 890 20 0.340 0.001
----------------------------------------------------------
92-34 510 600 90 0.900 0.006
----------------------------------------------------------
92-34 730 750 20 0.585 0.002
----------------------------------------------------------
92-34 870 980 110 0.385 0.002
----------------------------------------------------------
92-35 100 140 40 0.985 0.001
----------------------------------------------------------
92-35 250 290 40 0.380 0.001
----------------------------------------------------------
92-35 320 340 20 0.275 0.001
----------------------------------------------------------
92-35 390 430 40 0.523 0.001
----------------------------------------------------------
92-35 480 520 40 0.463 0.001
----------------------------------------------------------
92-35 820 920 100 0.307 0.001
----------------------------------------------------------
92-42 180 230 50 0.824 0.006
----------------------------------------------------------
92-42 330 370 40 0.498 0.001
----------------------------------------------------------
92-42 420 470 50 0.372 0.001
----------------------------------------------------------
92-42 600 670 70 0.533 0.002
----------------------------------------------------------
92-42 740 760 20 0.380 0.002
----------------------------------------------------------
92-42 800 830 30 0.583 0.031
----------------------------------------------------------
92-42 870 910 40 0.593 0.006
----------------------------------------------------------
92-43 870 960 90 0.367 0.006
----------------------------------------------------------
92-44 540 780 240 0.729 0.002
----------------------------------------------------------
92-45 50 150 100 0.564 0.001
----------------------------------------------------------
92-45 200 220 20 0.455 0.002
----------------------------------------------------------
92-45 370 390 20 0.800 0.002
----------------------------------------------------------
92-45 420 440 20 0.590 0.001
----------------------------------------------------------
92-45 520 570 50 0.908 0.002
----------------------------------------------------------
92-45 610 640 30 0.323 0.002
----------------------------------------------------------
92-45 670 740 70 0.386 0.001
----------------------------------------------------------
92-46 370 390 20 0.400 0.001
----------------------------------------------------------
92-46 430 460 30 0.447 0.001
----------------------------------------------------------
92-46 540 680 140 0.455 0.001
----------------------------------------------------------
92-46 740 780 40 0.250 0.001
----------------------------------------------------------
92-46 860 920 60 0.415 0.001
----------------------------------------------------------
92-46 970 990 20 0.225 0.001
----------------------------------------------------------
92-47 670 740 70 0.380 0.004
----------------------------------------------------------
92-47 770 790 20 0.290 0.001
----------------------------------------------------------
92-47 880 900 20 0.315 0.002
----------------------------------------------------------
92-48 380 560 180 0.472 0.002
----------------------------------------------------------
92-48 620 680 60 0.495 0.001
----------------------------------------------------------
92-49 360 390 30 0.413 0.001
----------------------------------------------------------
92-49 490 600 110 2.359 0.002
----------------------------------------------------------
92-49 670 690 20 0.405 0.001
----------------------------------------------------------
92-50 380 420 40 1.090 0.006
----------------------------------------------------------
92-50 480 500 20 0.395 0.005
----------------------------------------------------------
92-50 530 750 220 0.296 0.007
----------------------------------------------------------
92-50 800 820 20 0.640 0.001
----------------------------------------------------------
92-51 330 350 20 0.235 0.001
----------------------------------------------------------
92-53 110 130 20 0.300 0.001
----------------------------------------------------------
92-53 300 320 20 0.285 0.001
----------------------------------------------------------
92-53 440 570 130 0.643 0.002
----------------------------------------------------------
92-53 620 700 80 0.498 0.001
----------------------------------------------------------
92-54 360 430 70 0.390 0.001
----------------------------------------------------------
92-54 520 590 70 0.504 0.001
----------------------------------------------------------
92-54 610 630 20 0.210 0.001
----------------------------------------------------------
92-54 710 750 40 0.253 0.001
----------------------------------------------------------
92-55 80 100 20 0.240 0.001
----------------------------------------------------------
92-55 210 230 20 0.705 0.001
----------------------------------------------------------
92-55 350 370 20 0.335 0.001
----------------------------------------------------------
92-55 480 550 70 0.474 0.004
----------------------------------------------------------
92-55 610 630 20 0.250 0.002
----------------------------------------------------------
92-55 670 690 20 0.370 0.009
----------------------------------------------------------
92-57 300 320 20 0.310 0.001
----------------------------------------------------------
92-58 300 410 110 0.302 0.001
----------------------------------------------------------
92-58 450 470 20 0.505 0.001
----------------------------------------------------------
92-58 500 630 130 0.591 0.001
----------------------------------------------------------
92-58 670 690 20 0.660 0.001
----------------------------------------------------------
92-59 590 610 20 0.230 0.003
----------------------------------------------------------
92-59 770 810 40 0.483 0.001
----------------------------------------------------------
92-59 840 870 30 0.400 0.002
----------------------------------------------------------
92-60 320 350 30 0.557 0.001
----------------------------------------------------------
92-60 550 570 20 0.340 0.006
----------------------------------------------------------
92-60 610 800 190 0.335 0.001
----------------------------------------------------------
92-60 850 870 20 0.585 0.001
----------------------------------------------------------
92-61 620 640 20 0.250 0.010
----------------------------------------------------------
92-61 660 680 20 0.410 0.001
----------------------------------------------------------
92-61 710 840 130 0.354 0.001
----------------------------------------------------------
92-61 910 930 20 0.230 0.001
----------------------------------------------------------
92-62 340 390 50 0.604 0.001
----------------------------------------------------------
92-62 500 720 220 0.604 0.002
----------------------------------------------------------
92-62 760 780 20 0.255 0.001
----------------------------------------------------------
92-62 810 874 64 0.792 0.001
----------------------------------------------------------
92-63 30 110 80 0.844 0.001
----------------------------------------------------------
92-63 630 660 30 0.530 0.001
----------------------------------------------------------
92-64 330 420 90 0.347 0.001
----------------------------------------------------------
92-64 550 890 340 0.477 0.001
----------------------------------------------------------
92-65 500 520 20 0.310 0.002
----------------------------------------------------------
92-66 190 220 30 0.553 0.011
----------------------------------------------------------
92-66 490 510 20 0.305 0.002
----------------------------------------------------------
92-66 540 610 70 0.753 0.004
----------------------------------------------------------
92-66 810 835 25 0.262 0.001
----------------------------------------------------------
92-67 150 190 40 0.855 0.001
----------------------------------------------------------
92-67 450 490 40 1.068 0.001
----------------------------------------------------------
92-67 530 580 50 0.602 0.001
----------------------------------------------------------
92-67 710 780 70 0.344 0.002
----------------------------------------------------------
CS68-04 260 295 35 0.241
----------------------------------------------------------
CS68-05 70 90 20 0.420
----------------------------------------------------------
CS68-09 172 196 24 0.536
----------------------------------------------------------
CS68-09 454 474 20 0.295
----------------------------------------------------------
CS68-11 180 233 53 0.578
----------------------------------------------------------
CS68-12 127 190 63 0.668
----------------------------------------------------------
CS68-12 250 270 20 0.275
----------------------------------------------------------
CS69-01 37 80 43 0.597
----------------------------------------------------------
CS69-01 130 150 20 0.665
----------------------------------------------------------
CS69-02 50 150 100 0.387
----------------------------------------------------------
CS69-03 190 210 20 0.375
----------------------------------------------------------
CS69-03 290 370 80 0.505
----------------------------------------------------------
CS69-08 50 210 160 0.328
----------------------------------------------------------
CS70-01 200 250 50 0.320 0.004
----------------------------------------------------------
CS70-01 330 350 20 0.275 0.002
----------------------------------------------------------
CS70-02 40 60 20 0.200 0.001
----------------------------------------------------------
CS70-02 240 260 20 0.220 0.002
----------------------------------------------------------
CS70-02 340 360 20 0.615 0.001
----------------------------------------------------------
CS70-04 480 500 20 0.295 0.001
----------------------------------------------------------
CS70-05 550 600 50 0.272 0.001
----------------------------------------------------------
CS70-06 290 310 20 0.260 0.001
----------------------------------------------------------
CS70-06 540 628 88 0.468 0.002
----------------------------------------------------------
CS70-07 370 430 60 0.680 0.001
----------------------------------------------------------
CS70-07 530 560 30 0.203 0.001
----------------------------------------------------------
CS70-08 400 440 40 0.560 0.001
----------------------------------------------------------
CS70-08 590 668 78 0.295 0.003
----------------------------------------------------------
CS70-11 290 310 20 0.360 0.004
----------------------------------------------------------
CS70-12 180 200 20 0.270 0.001
----------------------------------------------------------
CS70-12 440 470 30 0.663 0.002
----------------------------------------------------------
CS70-14 440 470 30 0.867 0.002
----------------------------------------------------------
CS71-01 190 210 20 0.370
----------------------------------------------------------
CS71-02 240 260 20 0.620
----------------------------------------------------------
CS71-03 140 160 20 0.505
----------------------------------------------------------
E90-12 460 510 50 0.604 0.003
----------------------------------------------------------
E90-15 430 740 310 0.818 0.004
----------------------------------------------------------
E90-16 130 160 30 1.267 0.001
----------------------------------------------------------
E90-16 380 780 400 0.671 0.002
----------------------------------------------------------
E90-17 90 110 20 0.255 0.001
----------------------------------------------------------
E90-17 200 240 40 0.558 0.001
----------------------------------------------------------
E90-17 340 580 240 0.340 0.002
----------------------------------------------------------
E90-17 720 750 30 0.403 0.001
----------------------------------------------------------
E90-18 330 680 350 0.237 0.001
----------------------------------------------------------
E90-20 560 640 80 0.790 0.003
----------------------------------------------------------
E90-20 700 720 20 0.460 0.002
----------------------------------------------------------
G69-146 110 200 90 0.304 0.001
----------------------------------------------------------

No regulatory authority has approved or disapproved the information contained in this news release.

Contact Information

  • Taseko Mines Limited
    Brian Bergot
    Investor Services
    (604) 684-6365 or Toll Free: 1-800-667-2114
    (604) 684-8092 (FAX)
    Website: www.tasekomines.com