TerraX Drills 4.21 m @ 12.29 g/t Au, Including 2.50 m @ 19.43 g/t Au at Crestaurum Shear, Yellowknife City Gold Project

YELLOWKNIFE, NORTHWEST TERRITORIES--(Marketwired - Dec. 8, 2015) - TerraX Minerals Inc. (TSX VENTURE:TXR)(FRANKFURT:TX0)(OTC PINK:TRXXF) has received assay results from the final 22 holes (2,764 meters) of a 41 hole summer drill program completed at the Crestaurum Shear on its Yellowknife City Gold Project ("YCG"), immediately north of Yellowknife in the Northwest Territories. Drilling was designed to prepare the South Shoot of the Crestaurum Zone for future resource estimation, and consisted of definition and extension drilling on the mineralized shoot. Highlights of this drilling include:

• 4.21 m @ 12.29 g/t Au, including 2.50 m @ 19.43 g/t Au in TCR15-068
• 10.80 m @ 3.49 g/t Au, including 2.38 m @ 8.13 g/t Au, and 4.37 m @ 3.46 g/t Au in TCR15-052
• 9.20 m @ 3.37 g/t Au, including 2.20 m @ 12.27 g/t Au in TCR15-064, and
• 1.50 m @ 11.37 g/t Au in TCR15-072

Eighteen holes were drilled on the South Shoot to test the perimeters of higher grade shoots, and down dip extensions. The previously reported drilling by TerraX in the winter of 2015 on the higher grade portions of the South Shoot included 7.00 m @ 10.23 g/t Au, including 2.97 m @ 23.69 g/t Au in hole TCR15-003; 8.00 m @ 6.83 g/t Au, including 2.04 m @ 23.89 g//t Au in hole TCR15-005; and 15.50 m @ 2.89 g/t Au, including 2.94 m @ 13.28 g/t Au in TCR15-006. The best intersections in the drilling reported today include 4.21 m @ 12.29 g/t Au, including 2.50 m @ 19.43 g/t Au in TCR15-068; 10.80 m @ 3.49 g/t Au, including 2.38 m @ 8.13 g/t Au in TCR15-052; and 9.20 m @ 3.37 g/t Au, including 2.20 m @ 12.27 g/t Au in TCR15-064.

Several holes also hit significant mineralization in hanging wall veins near surface. This hanging wall structure has been consistently mineralized with gold in the drill holes reported here, and in previous drill holes that have also intersected this horizon. The previously reported drilling by TerraX from 2014 and in the winter of 2015 on the South Shoot included hanging wall assays of 0.70 m @ 18.25 g/t Au in hole TNB14-006 and 1.70 m @ 3.92 g/t Au in TCR15-001. The current drill results had best intersections of 0.50 m @ 15.65 g/t Au in TCR15-071; 1.00 m @ 5.61 g/t Au in TCR15-065; and 1.00 m @ 5.26 g/t Au in TCR15-070. These results indicate a significant hanging wall zone of mineralization with good continuity. It is unknown at this time whether these hanging wall veins are related to a previously reported (news release of December 4, 2015) hanging wall structure in the Central and North Shoot areas of Crestaurum located approximately 500 metres to the northeast.

All holes were drilled normal to interpreted strike and normal to or at high angles to the dip of the zones of mineralization, and reported drill intervals from mineralized zones are between 90-100% true thickness. A map showing all drill collar locations reported in this news release is available on our web site at www.terraxminerals.com.

Hole		UTM East		UTM North		Azimuth		Dip				From (m)		To (m)		Interval (m)		Au g/t		Shoot Area		Surface
TCR15-052		635739		6941688		304		-45				51.06		61.86		10.80		3.49		South		Main
										incl.		51.06		53.44		2.38		8.13		South		Main
										and incl.		55.13		59.50		4.37		3.46		South		Main
TCR15-053		635739		6941688		304		-64				55.50		60.15		4.65		1.46		South		Main
										incl.		55.50		57.68		2.18		2.44		South		Main
TCR15-054		635691		6941675		305		-45				32.97		37.65		4.68		1.46		South		Main
										incl.		32.97		35.00		2.03		2.67		South		Main
TCR15-055		635679		6941657		306		-46				30.78		33.84		3.06		2.80		South		Main
TCR15-056		635657		6941614		304		-67				22.42		22.92		0.50		6.57		South		Hanging wall
										and		41.51		47.88		6.37		1.99		South		Main
										incl.		41.51		43.51		2.00		3.34		South		Main
										and incl.		46.58		47.88		1.30		4.18		South		Main
TCR15-061		635645		6941490		306		-54				101.35		103.85		2.50		3.39		South		Main
TCR15-062		635657		6941504		305		-65				85.91		86.70		0.79		4.94		South		Main
TCR15-063		635657		6941504		305		-78				99.85		100.35		0.50		1.33		South		Main
										and		124.81		125.81		1.00		0.96		South		Footwall
TCR15-064		635718		6941515		305		-65				138.00		147.20		9.20		3.37		South		Main
										incl.		144.00		146.20		2.20		12.27		South		Main
TCR15-065		635718		6941515		305		-75				132.01		133.01		1.00		5.61		South		Hanging wall
										and		144.92		145.42		0.50		4.48		South		Main
										and		155.85		157.80		1.95		1.90		South		Footwall
TCR15-066		635718		6941515		298		-47				112.30		113.96		1.66		1.04		South		Main
										and		128.36		131.02		2.66		1.47		South		Footwall
TCR15-067		635732		6941559		305		-45				105.00		105.70		0.70		1.26		South		Hanging wall
										and		113.15		118.83		5.68		1.13		South		Main
										incl.		116.18		118.13		1.95		2.25		South		Main
TCR15-068		635732		6941559		305		-60				112.00		112.65		0.65		5.82		South		Hanging wall
										and		121.00		125.21		4.21		12.29		South		Main
										incl.		122.71		125.21		2.50		19.43		South		Main
TCR15-069		635732		6941559		305		-80				132.75		133.25		0.50		6.55		South		Main
										and		139.55		140.05		0.50		3.64		South		Footwall
TCR15-070		635739		6941590		305		-45				67.70		68.70		1.00		5.26		South		Hanging wall
										and		94.90		106.11		11.21		1.27		South		Main
										incl.		104.60		106.11		1.51		6.32		South		Main
TCR15-071		635739		6941590		305		-62				74.50		75.00		0.50		15.65		South		Hanging wall
										and		102.50		105.38		2.88		2.29		South		Main
TCR15-072		635739		6941590		305		-80				87.38		88.38		1.00		4.31		South		Hanging wall
										and		100.30		101.30		1.00		1.79		South		Hanging wall
										and		125.30		126.80		1.50		11.37		South		Main
TCR15-073		635781		6941601		305		-60				69.00		70.00		1.00		1.62		South		Hanging wall
										and		101.11		101.79		0.68		0.84		South		Main

Four holes (TCR15-057 to TCR15-060) were specifically designed to intersect a fault (Daigle Lake Fault) on the south end of the Crestaurum Shear to determine its location and confirm the interpreted offset of the Crestaurum main shear due to this fault. These holes were not expected to hit the main shear structure but did encounter minor mineralization on unknown surfaces (best intersection of 1.00 m @ 4.23 g/t Au).

TerraX collected 912 samples for assay from the drilling reported here. Results ranged from below detection to a high of 23.5 g/t Au. Drill hole collar locations were surveyed to sub-meter accuracy. Down hole surveying (Easy Shot) was completed on all holes. TerraX inserts certified standards and blanks into the sample stream as a check on laboratory QC. Drill core samples are cut by diamond saw at TerraX's core facilities in Yellowknife. A halved core sample is left in the core box. The other half core is sampled and transported by TerraX personnel in securely sealed bags to ALS Chemex's (ALS) preparation laboratory in Yellowknife. After sample preparation, samples are shipped to ALS's Vancouver facility for gold and ICP analysis. Gold assays of >3 g/t are re-assayed on a 30 gm split by fire assay with a gravimetric finish. ALS is a certified and accredited laboratory service. ALS routinely inserts certified gold standards, blanks and pulp duplicates, and results of all QC samples are reported.

TerraX and GeoVector Management Inc. were responsible for planning the drill holes. GeoVector was also responsible for the management and supervision of the drill program. The technical information contained in this news release has been approved by Joseph Campbell, the President of TerraX, who is a Qualified Person as defined in "National Instrument 43-101, Standards of Disclosure for Mineral Projects".

About the Yellowknife City Gold Project

The Yellowknife City Gold Project now encompasses approximately 116 sq km of contiguous land immediately north and now south of the City of Yellowknife in the Northwest Territories. Through a series of acquisitions, TerraX now controls one of the six major high-grade gold camps in Canada - and the least explored.

The project lies on the prolific Yellowknife greenstone belt and the combined Southbelt and Northbelt properties cover 23 km of strike length on the southern and northern extensions of the shear system that hosts the high-grade Con and Giant gold mines. The project area contains multiple shears that are the recognized hosts for gold deposits in the Yellowknife gold district, with innumerable gold showings and high grade drill results on the Northbelt property this past year that serve to indicate the project's potential as a world-class gold district. Since February 2013, TerraX has consolidated the project area by acquiring, optioning and staking numerous properties, including: Northbelt, Goodwin, Ryan Lake, Walsh Lake, U-Breccia and Southbelt, as well as staking additional contiguous lands. Being within 15 km of the City of Yellowknife, the YCG is close to vital infrastructure, including transportation, service providers, hydro-electric power and skilled tradespeople.

For more information on the Yellowknife City Gold Project, please visit our web site at www.terraxminerals.com.

On behalf of the Board of Directors

Joseph Campbell, President

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

This news release contains forward-looking information, which involves known and unknown risks, uncertainties and other factors that may cause actual events to differ materially from current expectation. Important factors - including the availability of funds, the results of financing efforts, the completion of due diligence and the results of exploration activities - that could cause actual results to differ materially from the Company's expectations are disclosed in the Company's documents filed from time to time on SEDAR (see www.sedar.com). Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date of this press release. The company disclaims any intention or obligation, except to the extent required by law, to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise.