SOURCE: Vishay Precision Group
MALVERN, PA--(Marketwire - Sep 25, 2012) - Vishay Precision Group, Inc. (NYSE: VPG) today announced that its Vishay Foil Resistors brand (VFR) has introduced a new high-temperature version of its hermetically sealed precision resistor network devices (PRND) for applications to +230°C. The PRND HT devices provide load-life stability to 0.03% typical (0.015% ratio) at +200°C for 2,000 hours at derated power and long-term, high-temperature exposure to 0.03% typical (0.015% ratio) at +230°C for 1,000 hours at zero power.
Custom configured to requested circuit schematics and specifications, VFR's PRND HTs are hermetically sealed networks consisting of multiple Bulk Metal® Z1-Foil chip resistors connected by gold-wire bonding inside ceramic packages. The combination of the PRND HT's ceramic package, which has the advantage of electrical isolation on the underside and high heat dissipation capability, with hermetic sealing and the location of the chips within the package, helps to preserve uniform conditions inside the device for maximum environmental protection. The result is improved load-life stability and better performance for high-temperature and high-moisture environments.
The PRND HT series is based on VFR's next-generation Z1-Foil technology, which provides an order of magnitude reduction in the Bulk Metal Foil element's sensitivity to temperature changes -- both external and internal -- with emphasis on long-term stability in high-temperature environments. The devices' solid element alloy is matched to the substrate, forming a single entity with balanced temperature characteristics for an unusually low and predictable TCR of 2.5 ppm/°C typical from -55°C to +200°C.
Offered in dual-in-line (DIP), flatpack, gull wing, and leadless chip carrier (LCC) package configurations, the PRND HTs feature a wide resistance range from 5 ohms, with tolerance matching to 0.005%. Any resistance value within this range is available at any tolerance with no additional cost or lead time effect. The devices provide a power rating to 1.4 W per package (150 mW per resistor) at +70°C.
The resistor networks feature a rise time of 1.0 ns with effectively no ringing, a thermal stabilization time of less than 1 s (nominal value achieved within 10 ppm of steady state value), current noise of 0.010 microvolts rms per volt of applied voltage (less than -40 dB), and a voltage coefficient of less than 0.1 ppm/V. Offered with lead (Pb)-free gold-plated terminations, the devices provide a non-inductive (less than 0.08 microhenries), non-capacitive design.
The precision-matched PRND HT resistors are optimized for a wide variety of high-reliability applications requiring resistors to have a minimal drift from their initial values when operating above +175°C and in humid environments. These include high-performance signal conditioning applications in different amplifiers, precision dividers, and reference and bridge circuits.
The Z1-Foil technology allows VFR to produce customer-oriented products designed to satisfy unique and specific technical requirements. In addition to the special chip stabilization under extreme environment conditions in the production line, additional specially oriented post manufacturing operations (PMO) are offered for high-temperature applications that require an even higher degree of reliability and stability.
The hermetic networks are based on fabrication from a standing inventory of packages and resistor chips. This permits quick delivery of prototypes because there are no masks to design or trial processing to be made. Further, it allows a large combination of values, tolerances, and circuits. There are normally no engineering or setup charges, and no minimum quantities are required.
Samples and production quantities of the PRND HT resistors are available now, with lead times of eight weeks for standard orders.
Further information about the PRND HT series and other Vishay Foil Resistors products is available at www.vishayfoilresistors.com. Follow Vishay Foil Resistors at http://twitter.com/foilresistor.
About VPG Foil Resistors
Distinguished by the premier brands Vishay Foil Resistors, Powertron, and Alpha Electronics, VPG Foil Resistors is part of Vishay Precision Group (VPG), producing the most precise and stable resistors available. The portfolio comprises products in a variety of resistor and package configurations to meet the needs of a wide range of applications: discrete resistors and resistor networks in surface mount and through-hole (fixed-lead) configurations; customized chip resistor networks; precision trimming potentiometers; and discrete chips for use in hybrid circuits. The foil resistors and current sensors are used in applications requiring a high degree of precision and stability, such as in medical testing equipment, semiconductor equipment, precision measuring instruments, aerospace, and military applications.
About Vishay Precision Group
Vishay Precision Group (VPG) is an internationally recognized designer, manufacturer and marketer of: components based on its resistive foil technology; sensors; and sensor-based systems specializing in the growing markets of stress, force, weight, pressure, and current measurements. VPG is a market leader of Foil Technology Products, providing ongoing technology innovations in precision foil resistors and foil strain gages, which are the foundation of the Company's Force Sensors Products and its Weighing and Control Systems. The product portfolio consists of a variety of well-established brand names recognized for precision and quality in the marketplace. To learn more, visit VPG at www.vishaypg.com.
Link to product technical documentation:
Link to product photo: